South African type MR tender


The South African type MR tender was a steam locomotive tender.
Type MR tenders were rebuilt from Type MP1 tenders, which had entered service between 1912 and 1920. The rebuilding resulted in a tender with a larger water tank, but the same coal capacity.

Origin

The Type MP1 tender first entered service in 1912, as tenders to the Mountain type steam locomotives which were acquired by the South African Railways in that year. They were built by North British Locomotive Company and Beyer, Peacock and Company.
More Type MP1 tenders, from which the Type MR would later be rebuilt, entered service from 1913 to 1920 as tenders to the Classes 12A, 12B, 14A, 14B, 15, 15A, 16, 16A, 16B and 16C. These locomotives and tenders were built by Baldwin Locomotive Works, Beyer, Peacock and Company, Henschel and Son, J.A. Maffei and North British Locomotive Company.
Other locomotives which were delivered new with Type MP1 tenders were the Classes 14, MC1, MH and MJ.

Rebuilding

During the 1930s, several of the Type MP1 tenders were rebuilt by the SAR by mounting a completely new upper structure with a larger water tank on the existing underframe. The modification was done to drawings approved by Chief Mechanical Engineer A.G. Watson in 1929 in respect of Type MP1 tenders of the Classes 12, 12A, 12B, 14, 14A, 14B, 15, 15A, 16, 16A, 16B and 16C. These rebuilt tenders had a more modern appearance, with flush sides all the way to the top of the self-trimming coal bunker.SAR&H Mechanical Department. Alteration of Tender to Self Trimming Coal Bunker Type - Class 12, 12A, 12B, 14, 14A, 14B, 15, 15A, 16, 16A, 16B, 16C. SAR Mechanical Department Drawing Office, Drawing L-6780/1, 7 April 1929.
The program to rebuild several older tender types with new upper structures was begun by Col F.R. Collins DSO, who approved several of the detailed drawings for the work during his term in office as CME of the SAR from 1922 to 1929.

Characteristics

The rebuilt Type MR tender had the same coal capacity as the Type MP1, but its water capacity had been increased from. It had a maximum axle load of.

Classification letters

Since many tender types are interchangeable between different locomotive classes and types, a tender classification system was adopted by the SAR. The first letter of the tender type indicates the classes of engines to which it could be coupled. The "M_" tenders could be used with the locomotive classes as shown, although engine drawbars and intermediate emergency chains had to be replaced or adjusted to suit the target locomotive in some cases.
The second letter indicates the tender's water capacity. The "_R" tenders had a capacity of.

Illustration