Spin–lattice relaxation


During nuclear magnetic resonance observations, spin–lattice relaxation is the mechanism by which the component of the total nuclear magnetic moment vector which is parallel to the constant magnetic field relaxes from a higher energy, non-equilibrium state to thermodynamic equilibrium with its surroundings. It is characterized by the spin–lattice relaxation time, a time constant known as T1.
There is a different parameter, T2, the spin-spin relaxation time, which concerns the relaxation of components of the nuclear magnetization vector which are perpendicular to the external magnetic field. Measuring the variation of T1 and T2 in different materials is the basis for some magnetic resonance imaging techniques.

Nuclear physics

T1 characterizes the rate at which the longitudinal Mz component of the magnetization vector recovers exponentially towards its thermodynamic equilibrium, according to equation
Or, for the specific case that
It is thus the time it takes for the longitudinal magnetization to recover approximately 63% of its initial value after being flipped into the magnetic transverse plane by a 90° radiofrequency pulse.
Nuclei are contained within a molecular structure, and are in constant vibrational and rotational motion, creating a complex magnetic field. The magnetic field caused by thermal motion of nuclei within the lattice is called the lattice field. The lattice field of a nucleus in a lower energy state can interact with nuclei in a higher energy state, causing the energy of the higher energy state to distribute itself between the two nuclei. Therefore, the energy gained by nuclei from the RF pulse is dissipated as increased vibration and rotation within the lattice, which can slightly increase the temperature of the sample. The name spin-lattice relaxation refers to the process in which the spins give the energy they obtained from the RF pulse back to the surrounding lattice, thereby restoring their equilibrium state. The same process occurs after the spin energy has been altered by a change of the surrounding static magnetic field or if the nonequilibrium state has been achieved by other means.
The relaxation time, T1 is dependent on the gyromagnetic ratio of the nucleus and the mobility of the lattice. As mobility increases, the vibrational and rotational frequencies increase, making it more likely for a component of the lattice field to be able to stimulate the transition from high to low energy states. However, at extremely high mobilities, the probability decreases as the vibrational and rotational frequencies no longer correspond to the energy gap between states.
Different tissues have different T1 values. For example, fluids have long T1s, and water-based tissues are in the 400-1200 ms range, while fat based tissues are in the shorter 100-150 ms range. The presence of strongly magnetic ions or particles also strongly alter T1 values and are widely used as MRI contrast agents.

''T''1 weighted images

uses the resonance of the protons to generate images. Protons are excited by a radio frequency pulse at an appropriate frequency and then the excess energy is released in the form of a minuscule amount of heat to the surroundings as the spins return to their thermal equilibrium. The magnetization of the proton ensemble goes back to its equilibrium value with an exponential curve characterized by a time constant T1.
T1 weighted images can be obtained by setting short repetition time such as < 750 ms and echo time such as < 40 ms in conventional spin echo sequences, while in Gradient Echo Sequences they can be obtained by using flip angles of larger than 50o while setting TE values to less than 15 ms.
T1 is significantly different between grey matter and white matter and is used when undertaking brain scans. A strong T1 contrast is present between fluid and more solid anatomical structures, making T1 contrast suitable for morphological assessment of the normal or pathological anatomy, e.g., for musculoskeletal applications.