The Stone of Remembrance was designed by the British architect Sir Edwin Lutyens for the Imperial War Graves Commission. It was designed to commemorate the dead of World War I, to be used in IWGC war cemeteries containing 1000 or more graves, or at memorial sites commemorating more than 1000 war dead. Hundreds were erected following World War I, and it has since been used in cemeteries containing the Commonwealth dead of World War II as well. It is intended to commemorate those "of all faiths and none", and has been described as one of Lutyens' "most important and powerful works", with a "brooding, sentinel-like presence wherever used".
Design
The initial thoughts for the design were sent by Lutyens in letters and memoranda in May and August 1917 to Fabian Ware, the founder and head of the Imperial War Graves Commission, before and after the period in which Lutyens and other architects visited the wartime cemeteries in France in July 1917 at the request of Ware, to give their initial thoughts on what should be done to commemorate the dead: Part of the design is the three-stepped platform on which each stone rests. Architectural historian Gavin Stamp, in Silent Cities, quotes further from Lutyen's 1917 correspondence with Ware, where Lutyens describes the proposed stone as: In a later work in 2006, Stamp identifies a similarly abstract and geometrical concept that was part of Lutyens' creative process, citing a letter that Lutyens wrote to his wife while on the July 1917 visit to France, describing how a 'solid ball of bronze' could be used to make a permanent monument. By the time of Ware's 1937 report, published as The Immortal Heritage the same year, some 560 Stones of Remembrance had been erected for World War I cemeteries and memorials in France and Belgium alone.
Symbolism
The Stone of Remembrance is one of the standard architectural features of Commonwealth War Graves Commission cemeteries and memorials, the other being the Cross of Sacrifice by Reginald Blomfield. In contrast, the design for the Stone deliberately avoided "shapes associated with particular religions". The shape of the Stone has been compared both to that of a sarcophagus and an altar, but was always intended to be abstract and appeal to all denominations. There was, however, controversy over the symbolism, both during the design and approval process and subsequently. Lutyens and those supporting the concept of secular architecture and equality of remembrance had to contend with those who wanted the overt Christian symbolism of a cross, or who objected to the pagan overtones of the proposed Stone. Lutyens corresponded with a wide variety of people to gain support for his idea. Eventually, the decision to use both Cross and Stone was taken, and the two designs were adopted in different ways. Blomfield's Cross was built in different sizes according to the size of the cemetery, with Lutyens' Stone staying the same size but not being used in the smaller cemeteries where it was thought it would overwhelm the setting.
Geometry
The geometry of the stone structure was "based on studies of the Parthenon". According to the Australian GovernmentDepartment of Veterans' Affairs each stone is 3.5 metres long and 1.5 metres high. It was designed using the principle of entasis. This involved incorporating subtle curves into the design, so that the stone does not have straight sides, but has circular lines that if extended would form a sphere 1,801 feet and 8 inches in diameter. The effect of the stone monument has been attributed to its geometry: "...its curious power and symbolic strength derive from its careful proportions and the application of a subtle entasis to all its surfaces."
Inscription
The phrase inscribed on the stone, one of several suggested during the design phase, was proposed by the British author, poet and Nobel laureateRudyard Kipling, whose only son had died in the war. Kipling's role was to advise the IWGC on inscriptions and other literary matters, and the phrase used on the Stones of Remembrance is a quote from the Wisdom of Sirach.
