Subaru Leone
The Subaru Leone is a compact car produced by the Japanese car manufacturer Subaru from 1971 to 1994. The word leone is Italian for lion.
It was released as a replacement to the Subaru 1000 and was the predecessor to the Subaru Impreza. All Leones were powered by the Subaru EA boxer engine. Most cars were equipped with optional four-wheel drive. At the time of its introduction, the Leone was Subaru's top model until 1989, when the larger Legacy was introduced.
Although released in Japan and some export markets as the Leone, for many years, this was the only vehicle sold internationally by Subaru where the smaller kei cars Rex, Vivio, R-2, 360, and Sambar were not commonly sold. As a result, in major markets such as Australia, Europe and North America, it was instead identified with a trim level designation, some of which included: DL, GL, GLF, GLF5, GL-10, and RX. The car is thus often referred to simply as the Subaru GL or the Subaru L series.
First generation
The first generation Leone was released on October 7, 1971 as a front-wheel drive coupé, with trim levels DL, GL and GSR. April 1972 saw the introduction of the two- and four-door sedans with trim levels DL, GL and in Japan, the Super Touring. At its introduction, the Leone was Subaru's largest car, and was the top level vehicle above the kei car Subaru Rex.In September 1972 the four-wheel drive station wagon was released, however it did not appear in the United States until 1974 as a 1975 model. The Leone was introduced before the 1972 Winter Olympics in Sapporo to emphasize its durability in adverse weather conditions. Up until this time four-wheel drive had been limited mainly to off-road vehicles, although the very expensive Jensen FF had been built in limited numbers.
Subaru broke this pattern by introducing a mass-produced four-wheel drive passenger car, after having tested the waters by building a limited series of four-wheel drive FF-1 1300G wagons in 1971. Four-wheel drive was Subaru's most notable feature during the 1970s and 1980s, leading to particularly strong sales in places like Switzerland and Colorado. The Leone competed with the Toyota Corolla, Nissan Sunny, Honda Civic, Mazda Familia, Isuzu Gemini, and the Mitsubishi Lancer. The Leone introduced a Subaru tradition of frameless side windows for all models.
In August 1968, Subaru entered into an alliance with Nissan Motors. The appearance of the new Leone was influenced by the design efforts from Nissan, especially the long hood and short trunk appearance that Nissan was using at that time for their own products. The 1400 RX coupé was one of the first Japanese automobiles to be equipped with four-wheel disc brakes. The two-door hardtop was introduced in June 1973 and a 4WD sedan in 1975. In the Japanese market, the sedan had to be equipped with the SEEC-T desmogged EA71 engine producing, whereas the station wagon was classified as a commercial vehicle and thus received an engine with.
The Leone was originally equipped with a 1.2- or a 1.4-litre flat-four, carbureted, OHV engine. The 1,100 cc engine from the earlier FF-1 G was carried over for the Leone 1100 van in the Japanese domestic market, but was only available in the first few years. In September 1975, as a response to tightening emissions regulations, the 1.2 was removed from the sedan lineup. To be able to offer as much power as the pre-smog 1.4 a bigger, 1.6-litre version was added for 1976.
The Leone was available with a four-speed manual transmission, a five-speed manual transmission, and also a three-speed automatic transmission beginning in 1975. Some early models had duo-servo drum brakes at the front, however, later models were equipped with disc brakes. All models originally had rear drum brakes except the RX coupés. Unusually, the handbrake or emergency brake operated on the front wheels.
In March 1977 an updated Leone range was released. All body panels were altered slightly and the overall look was 'smoother' and more contemporary in appearance. A completely new dashboard with altered interior were also part of the update. Despite these changes the overall effect was similar to the earlier version and it was mechanically identical, with the exception of the rear track which was widened by. The chassis codes were changed, with sedans now in the 30 series and estates in the 60 series. The little 1.2 continued to be available in the lowliest standard van model, with. In November 1977 a new top model arrived, the Leone Grand Am-T, which adopted the federalized safety bumpers and had an interior "inspired by American tastes."
The Leone entered Australia and New Zealand in 1973, with cars imported fully assembled from Japan. The 4WD Wagon entered the Australian market in 1975, and remained the only vehicle in its class until the early 1980s. Many versions - sedan, wagon and Brumby coupe utility, were also assembled from CKD kits, from 1978, in New Zealand by then-importer Motor Holdings' Waitara plant near New Plymouth. Local assembly ceased when the Legacy range replaced the Leone in 1993.
North America
The Leone was first introduced to the United States in 1972. In 1976 the EA63 engine was replaced with the 1.6 liter EA71 engine. The EA71 engine was originally installed in cars equipped with automatic transmission but eventually supplanted the EA63 across the entire range of vehicles in the US and Australia. Using Subaru's new SEEC-T technology meant that a catalytic converter was not necessary, lowering cost and enabling the use of leaded fuel. Power in 49-state trim was at 5200 rpm, although drivability and gas mileage suffered distinctly from the emissions equipment. The Wagon was also available with four-wheel drive, beginning with the 1977 model year.A print ad for the 1973 Subaru GL coupé referred to the engine as "quadrozontal" The large bumpers required in the United States sat on hydraulic units; these were not a part of the original design and thus intruded considerably into the luggage compartment.
Late in 1977 saw the introduction of the Subaru BRAT as a 1978 model. This was a two-seater body with a pickup truck bed, with two seats welded into the bed to evade the so-called chicken tax on light commercial vehicles. It brought the U.S. lineup to eight models in three trim levels. Most were in the volume DL trim except a base two-door, and the GF hardtop and 4WD models which shared a higher specification. For 1979, a decontented DL 4WD wagon and Brat were added along with fancier GL four-door sedan and 2WD wagon models bringing the total to twelve, the original fully equipped 4WDs also getting the DL designation. The original Brat was updated for 1981 with a dual-range 4WD transmission and the 1.8-litre EA81 engine. This was sold alongside the second generation Leone until the 1982 model year.
Second generation
In June 1979 the Leone saw its first complete model update. This generation was released with a two-door hardtop coupé, four-door sedan, station wagon and a three-door hatchback. Export sales began in the fall with the 1980 model year. The earlier two-door sedan was replaced by a three-door hatchback design, as an alternative to contemporary hatchback competitors. The Swingback, however, differed from its competitors in offering the option of four-wheel-drive.New for this generation was a dual-range four-speed 4WD transmission with both hi/lo range gearing and manual ride height adjustment on the 4WD models. In November 1981 Subaru introduced Japan's first all-wheel-drive vehicle with an automatic transmission, utilizing the world's first "wet hydraulic multi-plate clutch". This allowed the driver to engage 4WD with a simple push of a button rather than shifting a lever as in the manual models. The electric switch activated a solenoid that pushed the clutch plates together, thereby engaging the driveshaft to the rear wheels.
A new 1.8 L EA81 engine was added to the lineup from the beginning. In November 1983, a turbocharger with optional multi-port fuel injection was also added to the BRAT and Turbo Wagon models. They were only available with an automatic transmission and 3.70:1 gearing. In Japan the top-spec 1800 GTS sedan was the first Subaru to offer air conditioning, power windows, and power steering. The installation of a turbocharger was to provide better fuel economy by reducing emissions and burning fuel more effectively as opposed to providing a performance oriented product, due to taxes levied by the Japanese Government on a graduated scale based on the emissions emitted from the car.
Export markets
This generation of hatchback and BRAT were made alongside the third-generation offerings until 1987 for the BRAT in the United States and 1989 for the hatchback. All other second generation models were discontinued by 1985.;United States
In the United States, up-level trim vehicles could be identified by headlights – early GLs had square while others had round; later GLs had quad square headlights and lower series had single squares, with 1982 being a transition year. 1980–1982 models also featured an optional third headlight hidden behind the grille logo, using a similar approach used by Chrysler in the late 1960s called the Super-Lite. The logo moved up and out of the way when the driver activated a switch on the dash, revealing the extra headlight and activating it when the high-beams were illuminated.
;Australia
Australian buyers originally only received the option of a 1.6-liter engine coupled with a four-speed manual transmission. It was avialable as a four-door sedan or as a 4WD wagon.
Subaru BRAT
The Subaru BRAT was a coupe utility version of the Subaru Leone originally introduced in 1977. The BRAT was developed directly from the company's four-wheel drive station wagon model and was first introduced as a 1978 model – following the concept of coupe utilities such as the Chevrolet El Camino and the Ford Ranchero. The Brat was also known as Brumby, MV or Shifter depending on where it was sold.American versions also had carpeting and welded-in rear-facing jumpseats in the cargo area – serving actually to circumvent a tariff known as the Chicken tax. Although the BRAT could fairly be called a truck, the plastic seats in the cargo bed allowed Subaru to classify the BRAT as a passenger car. Passenger cars imported into the US were charged only a 2.5% tariff, compared to 25% on light trucks.
The BRAT was restyled in 1981 and the jumpseats were discontinued after the 1985 model year. The BRAT was introduced with a rise in popularity of small trucks being sold in the United States, primarily from Toyota, Nissan, and Mazda. Production continued into 1994 but ceased to be imported to North America in 1987. It was also known as the Brumby in Australia and New Zealand and the Shifter in the UK. Imports to Europe, Australia, and New Zealand continued until February 1994. The BRAT was not sold in Japan and was manufactured for export markets.
All BRATs had four-wheel drive and the Subaru EA engine. Early models received a 1.6L EA-71 whereas 1981 and later models received a 1.8 L EA-81 engine. 1983 and 1984 models could be purchased with an optional 94 hp turbocharged engine. Manual transmissions were standard on all models and an automatic transmission was available on turbocharged BRATs. 1980 and earlier models had a single-range transfer case, while 1981 and later GL models had a dual range transfer case and all turbocharged models were equipped with an automatic transmission with single range push-button four-wheel drive.
In 2003, Subaru tried this approach again but with a 4-door model, based on the second generation Subaru Outback platform called the Subaru Baja.
Third generation
On July 16, 1984, the Leone saw its second major redesign. This generation was released with a three-door hatchback, four-door sedan and a continuation of the popular station wagon body style. This generation Leone made its way to the United States in 1985. The hatchback was hamstrung by a very high rear cargo lip, but did receive a split folding rear seat.In Europe, the range was 1.3 DL, 1.6 DL, 1.6 GL, 1.8 DL, and 1.8 GL 4WD. There were also Turbo versions, with in catalyzed specifications. Not all versions were offered in all countries.
In North America, the 1.6-liter engine was dropped completely from the lineup, due to its lack of power. The 1.3 was only available in select markets. For 1987, the Leone received a facelift with a smoothed out appearance.
A new 1.8-liter SOHC engine, EA-82 was offered instead of the OHV 1.8-liter flat-four engine. The engine was available with a carburetor, single point fuel injection, multi-port fuel injection, or multi-port fuel injection with a turbocharger.
From 1988 this generation saw the availability of a full-time 4WD manual transmission or a full-time 4WD four-speed electronically controlled automatic transmission.
Other options found in the third generation Leone were a full digital instrument panel; self diagnostic computer, travel computer, cruise control and pneumatic suspension with selectable height,.
The performance oriented three-door RX was introduced in 1987, equipped with the EA82T turbo engine mated to a five speed manual transmission with synchronized dual-range and a manually-locking center differential). It had a 3.70:1 rear Limited Slip Differential, rally tuned suspension, four wheel disc brakes, power windows, A/C, central locking differential, adjustable seats and steering wheel, split fold-down rear seats, and hill holder. Weight was. An AT version was introduced in 1989, its final year of production. Only 2,600 were made.
From September 1989 until 1993, the van version was also provided to Isuzu as the "Geminett II" under an OEM deal.
By 1990 the Leone name continued to be used in Japan but was now known as the Loyale in Chile, the United States and Canada; the L-Series in Europe and Australia, and as the Omega in New Zealand where the third generation was the last to be assembled locally by Motor Holdings at Waitara. The popularity of the Leone wagon was ceded to the new, larger, Legacy wagon in 1989 and was ultimately replaced by the Impreza in 1994. The Impreza was introduced with a 'hatch like' wagon which was reminiscent of the first and second generation Leone wagons.