Subjective video quality


Subjective video quality is video quality as experienced by humans. It is concerned with how video is perceived by a viewer and designates their opinion on a particular video sequence and therefore related to the field of Quality of Experience. The measurement of subjective video quality is necessary since objective quality assessment algorithms such as PSNR have been shown to correlate badly with ratings. Subjective ratings may also be used as ground truth to develop new algorithms.
Subjective video quality tests are psychophysical experiments in which a number of viewers rate a given set of stimuli. These tests are quite expensive in terms of time and human resources and must therefore be carefully designed.
In subjective video quality tests, typically, SRCs are treated with various conditions to generate PVSs.

Measurement

The main idea of measuring subjective video quality is similar to the mean opinion score evaluation for audio. To evaluate the subjective video quality of a video processing system, the following steps are typically taken:
Many parameters of the viewing conditions may influence the results, such as room illumination, display type, brightness, contrast, resolution, viewing distance, and the age and educational level of viewers. It is therefore advised to report this information along with the obtained ratings.

Settings

The design of the HRCs depends on the system under study. Typically, multiple independent variables are introduced at this stage, and they are varied with a number of levels. For example, to test the quality of a video codec, independent variables may be the video encoding software, a target bitrate, and the target resolution of the processed sequence.
It is advised to select settings that result in ratings which cover the full quality range. In other words, assuming an Absolute Category Rating scale, the test should show sequences that viewers would rate from bad to excellent.

Viewers

Number of viewers

Viewers are also called "observers" or "subjects". A certain minimum number of viewers should be invited to a study, since a larger number of subjects increases the reliability of the experiment outcome, for example by reducing the standard deviation of averaged ratings. Furthermore, there is a risk of having to exclude subjects for unreliable behavior during rating.
The minimum number of subjects that are required for a subjective video quality study is not strictly defined. According to ITU-T, any number between 4 and 40 is possible, where 4 is the absolute minimum for statistical reasons, and inviting more than 40 subjects has no added value. In general, at least 15 observers should participate in the experiment. They should not be directly
involved in picture quality evaluation as part of their work and should not be experienced assessors. In other documents, it is also claimed that at minimum 10 subjects are needed to obtain meaningful averaged ratings.
However, most recommendations for the number of subjects have been designed for measuring video quality encountered by a home television or PC user, where the range and diversity of distortions tend to be limited. Given the large ranges and diversity of impairments that may occur on videos captured with mobile devices and/or transmitted over wireless networks, generally, a larger number of human subjects may be required.
Brunnström and Barkowsky have provided calculations for estimating the minimum number of subjects necessary based on existing subjective tests. They claim that in order to ensure statistically significant differences when comparing ratings, a larger number of subjects than usually recommended may be needed.

Viewer selection

Viewers should be non-experts in the sense of not being professionals in the field of video coding or related domains. This requirement is introduced to avoid potential subject bias.
Typically, viewers are screened for normal vision or corrected-to-normal vision using Snellen charts. Color blindness is often tested with Ishihara plates.
There is an ongoing discussion in the QoE community as to whether a viewer's cultural, social, or economic background has a significant impact on the obtained subjective video quality results. A systematic study involving six laboratories in four countries found no statistically significant impact of subject's language and culture / country of origin on video quality ratings.

Test environment

Subjective quality tests can be done in any environment. However, due to possible influence factors from heterogenous contexts, it is typically advised to perform tests in a neutral environment, such as a dedicated laboratory room. Such a room may be sound-proofed, with walls painted in neutral grey, and using properly calibrated light sources. Several recommendations specify these conditions. Controlled environments have been shown to result in lower variability in the obtained scores.

Crowdsourcing

has recently been used for subjective video quality evaluation, and more generally, in the context of Quality of Experience. Here, viewers give ratings using their own computer, at home, rather than taking part in a subjective quality test in laboratory rooms. While this method allows for obtaining more results than in traditional subjective tests at lower costs, the validity and reliability of the gathered responses must be carefully checked.
The world's largest crowdsourced picture quality database was made publicly available as the . It contains more than 350,000 human quality judgments from more than 8,000 human subjects. The human judgments were made on more than 1,100 mobile camera photographs afflicted by varying degrees of authentic distortions, instead of synthetically-introduced distortions as has been done in nearly every prior database.

Analysis of results

Opinions of viewers are typically averaged into the mean opinion score. To this aim, the labels of categorical scales may be translated into numbers. For example, the responses "bad" to "excellent" can be mapped to the values 1 to 5, and then averaged. MOS values should always be reported with their statistical confidence intervals so that the general agreement between observers can be evaluated.

Subject screening

Often, additional measures are taken before evaluating the results. Subject screening is a process in which viewers whose ratings are considered invalid or unreliable are rejected from further analysis. Invalid ratings are hard to detect, as subjects may have rated without looking at a video, or cheat during the test. The overall reliability of a subject can be determined by various procedures, some of which are outlined in ITU-R and ITU-T recommendations. For example, the correlation between a person's individual scores and the overall MOS, evaluated for all sequences, is a good indicator of their reliability in comparison with the remaining test participants.
Advanced models
While rating stimuli, humans are subject to biases. These may lead to different and inaccurate scoring behavior and consequently result in MOS values that are not representative of the “true quality” of a stimulus. In the recent years, advanced models have been proposed that aim at formally describing the rating process and subsequently recovering noisiness in subjective ratings. According to Janowski et al., subjects may have an opinion bias that generally shifts their scores, as well as a scoring imprecision that is dependent on the subject and stimulus to be rated. Li et al. have proposed to differentiate between subject inconsistency and content ambiguity.

Standardized testing methods

There are many ways to select proper sequences, system settings, and test methodologies. A few of them have been standardized. They are thoroughly described in several ITU-R and ITU-T recommendations, among those ITU-R BT.500 and ITU-T P.910. While there is an overlap in certain aspects, the BT.500 recommendation has its roots in broadcasting, whereas P.910 focuses on multimedia content.
A standardized testing method usually describes the following aspects:
Another recommendation, ITU-T P.913, gives researchers more freedom to conduct subjective quality tests in environments different from a typical testing laboratory, while still requiring them to report all details necessary to make such tests reproducible.

Examples

Below, some examples of standardized testing procedures are explained.

Single-Stimulus

Which method to choose largely depends on the purpose of the test and possible constraints in time and other resources. Some methods may have fewer context effects, which are unwanted test biases. In ITU-T P.910, it is noted that methods such as DCR should be used for testing the fidelity of transmission, especially in high quality systems. ACR and ACR-HR are better suited for qualification tests and – due to giving absolute results – comparison of systems. The PC method has a high discriminatory power, but it requires longer test sessions.

Databases

The results of subjective quality tests, including the used stimuli, are called databases. A number of subjective picture and video quality databases based on such studies have been made publicly available by research institutes. These databases – some of which have become de facto standards – are used globally by television, cinematic, and video engineers around the world to design and test objective quality models, since the developed models can be trained against the obtained subjective data.
Examples of these databases include the popular collection of public-domain subjective picture quality databases available at the website. The LIVE databases were the first high quality, large subjective picture quality databases to be made available to the public free of charge and without withholding of any data portion. Recent work includes the databases by the . A list of European databases related to the field of Quality of Experience can be found in the .