Surf ski


A surf ski is a type of kayak in the kayaking "family" of paddling craft. It is generally the longest of all kayaks and is a performance oriented kayak designed for speed on open water. The distinguishing characteristic of a surf ski is that it is primarily used for performance paddling in open water, most commonly the ocean, although it is well suited to all bodies of water and recreational paddling. The most common use of surf skis is in surf lifesaving competitions and downwind paddling.
A surf ski uses an open "sit-on-top" cockpit and not an enclosed cockpit that requires a splash cover, or spray deck, such as olympic flatwater sprint kayaks, white-water or slalom kayaks, or touring kayaks. Many surf ski models use a self-bailer to eliminate water in the cockpit area. The sit-on-top cockpit means a surf ski is easy to remount in the event of a capsize and also that the hull won't fill with water.
Surf skis are steered by foot controlled pedals connected to a stern rudder. Their performance design and steering system makes it possible to paddle onto and ride open water swells, on the ocean and large bodies of water
The modern day version of the surf ski originated in the surf lifesaving movement as a means to assist swimmers in distress. As the sport of lifesaving began to develop out of the lifesaving movement, surf ski paddling became one of the hallmark events of being a fit, competent lifeguard. Surf ski paddling is still incorporated into a number of lifesaving events and is a well established discipline in surf lifesaving.
Because of the surf ski's unique open water capabilities; it's speed and versatility; and the physical training it requires to paddle a surf ski - it has become a popular past time for water sports enthusiasts who want to combine the elements of adventure, fitness and competition into a single discipline.
In the 1950's lifeguards began holding stand alone, long distance surf ski races. These races were only raced by qualified lifesavers. In the 1970's the first "open" surf ski races began appearing, most notably the "Molokai Challenge" in Hawaii. In the mid-1990's the sport started becoming more widely adopted outside of surf lifesaving with the first non-affiliated series of races being organised in Cape Town, South Africa by BiIlly Harker. At the same time a series of non-affiliated races was organised in Sydney, Australia by Dean Gardiner.
In 2004 the first I.C.F World Cup was held in Cape Town, South Africa
In 2006 the first World Surfski Series was held.
In 2013, nearly 10 years after the first I.C.F world Cup in Cape Town, the International Canoe Federation hosted their inaugural World Championship in Via do Condo, Porto, Portugal.

Characteristics

There are two types of surf skis, the spec ski and the ocean ski. The spec ski is the traditional craft used by surf life saving clubs and must adhere to strict size and weight. The ocean ski on the other hand is typically a longer craft with a deeper cockpit. The Spec ski is designed tougher and with more rocker to manoeuvre in and out of the wave zone. The ocean ski is made for long-distance ocean paddling and is usually raced downwind with the swells. Typically 5.0-6.0 metres long and only 40–50 cm wide, surf skis are extremely fast when paddled on flat water and the fastest paddled craft available over a long distance on ocean swells. They track well but are less manoeuvrable and have less transverse primary and secondary stability than shorter, wider craft. Despite its typical instability, a surf ski is a very effective craft for paddling in big surf. Its narrowness and length helps it cut or punch through large broken waves. Double-bladed paddles are used, often with highly contoured wing blades for extra efficiency.
A waveski is a type of short surf ski similar to a surf board, used primarily in surf play. It is usually less than 3 m long, typically with a wide planing type bottom and with one to three fixed skegs, or fins.

Current use

Surf skis are used worldwide for surf lifesaving, wave surfing and for training and competition on flat-water or ocean racing. They are most popular in warmer coastal regions where the sport originated such as Australia, South Africa, New Zealand and Hawaii, however the versatility of surf ski as a kayaking discipline has made it very a very popular choice for paddlers worldwide especially in the Nordic regions, Western Europe, the Pacific Northwest and entire East Coast of the USA.
The typical surfski paddler is one who enjoys combining outdoor water sport with all three attributes of physical exertion namely: Fitness, Competition and Adventure. Surfski paddlers will paddle regularly, at high intensity, often in competition or races, and as much open water as possible seeking to ride swells or waves.

Construction and design

Some cheaper, heavier surf skis are made from polyethylene. Light weight surf skis are made of composite layers of epoxy or polyester resin-bonded cloth: fibreglass, kevlar, carbon fibre or a mixture. To cut weight, the number of layers of the material and the amount of resin may be minimised to just that necessary for structural integrity or increased for extra strength and durability in heavy surf.
Early surf skis were constructed in the same way as early surfboards, being laminated from light wood and sometimes covered with fabric. In the 1960s, the first foam surfboards and surf skis were carved from a single block of expanded polystyrene foam, strengthened with wooden stringers and covered with a thin layer of fibreglass. As the demand for surf skis grew in the 1970s, this custom method of production proved too costly and moulds were made from the most successful surf skis so that moulded craft could be made more cost effectively out of glass-fibre. At the same time, there was a divergence in ski design, one type becoming known as the lifesaving specification surf ski and the other being the long distance or ocean racing surf ski.
Ocean racing surf skis differ from spec skis in that they are longer, have sharply pointed bows and under stern rudders. The front of the modern lifesaving type surf ski is often flared to prevent nose diving on returning to shore when surfing down large steep waves. Ocean racing surf skis are also usually longer than long distance racing kayaks; they have more longitudinal curvature ; they typically have less transverse primary and secondary stability but more longitudinal stability because the paddler is seated more towards the centre of the craft to enhance wave riding ability. An ocean racing surf ski must have enough volume in the bow to provide buoyancy when punching through surf, a long waterline to make use of ocean swells, a sleek, narrow shape to reduce water resistance, as well as enough stability to make paddling in rough conditions feasible.

Competition in Surf Lifesaving

The surf ski is used in surf lifesaving competitions all over the world including Australia, Canada, New Zealand, South Africa, the United States and in Europe. Since its introduction, surf ski racing has been managed by the International Life Saving Federation. The standard ILS surf ski race is about 700m, from a start in the water, out around a series of buoys and back to the beach.
Events include:
It was not long before lifesavers began going further offshore in these new, extremely seaworthy craft, and ocean racing began to emerge. The first standalone surfski race to be held was in 1958 in Durban, South Africa, known as the Pirates-Umhlanga-Pirates, a 20km out and back race. The race continues to this day. The second oldest race happened the same year when lifesavers raced from Scottburgh to Brighton in South Africa, a 46 km event first held in 1958.
Other stand alone long distance surfski races started under the Surf lifesaving movement include:
To be eligible to compete in these events one had to be a qualified and currently active lifeguard, doing voluntary duties and competing for a Lifesaving Club.

Ocean Racing Races - Independent & Open to anyone

The first independent open ocean surfski race, where entries were open to anyone and not only to qualified lifesavers was the most famous Molokai race in Hawaii, a 60 km event first held in 1976. It's for this reason that The Molokai is also considered the unofficial World Championships of ocean ski racing.
In the mid-1990's the sport started becoming more widely adopted outside of surf lifesaving with the first non-affiliated series of races being organised in Cape Town, South Africa by Billy Harker. At the same time a series of non-affiliated races was organised in Sydney, Australia by Dean Gardiner.
In 2004 the first I.C.F World Cup was held in Cape Town, South Africa
In 2006 the first World Surfski Series was held.
In 2013, nearly 10 years after the first I.C.F world Cup in Cape Town, the International Canoe Federation hosted their inaugural World Championship in Via do Condo, Porto, Portugal.
There are now major surf ski races held all over the world.

Popular Surf ski destinations

More recently, there has been a huge growth in ocean surf ski racing in mainland USA, Australia, New Zealand and other Pacific countries.
As well as ocean racing, surf skis are becoming increasingly popular as a versatile racing craft for open class races that take place in sheltered bays, lakes and rivers. One advantage of the surf ski over the traditional kayak is that if the conditions tip the paddler into the water, a "wet entry" is possible by simply climbing back onto the boat and continuing paddling without first having to drain the boat of water. One of the most popular inland race venues that reliably provides ocean-like, surf able waves is the Columbia River along the stretch of river around Hood River that is also enormously popular for wind sports on water.
Venues include: Thurso East in the UK.

History

Harry McLaren and his brother Jack used an early version of the surf ski in 1912 around the family's oyster beds on Lake Innes, near Port Macquarie, New South Wales, Australia, and the brothers used them in the surf on Port Macquarie's beaches. The board was propelled in a sitting position with two small hand blades, which was probably not a highly efficient method to negotiate the surf. The deck is flat with a bung plug at the rear and a nose ring with a leash, possibly originally required for mooring. The rails are square and there is a pronounced rocker. The boards' obvious buoyancy indicates hollow construction, with thin boards of cedar fixed longitudinally down the board.
Surf skis were later used by lifesavers to rescue drowning swimmers. Until the 1960s, surf boats—lightweight rowing boats with a crew of five—were responsible for the rescue work in and behind the surf line. These boats were expensive and require a huge amount of skill to be used effectively. It was soon realised that a double surf ski could do almost everything that a surf boat could do, and in 1946 the importance of surf skis was noted by the surf lifesaving associations and they were included in lifesaving competitions and championships. Riders could stand up on them to surf them back to shore. These early surf skis were very wide and bear little resemblance to their modern counterparts. Surf skis were quickly introduced into surf lifesaving as a competition event. Over time they became narrower to maximise speed.
In Britain in the eighties surf skis were also short boats that developed from surf kayaks and we're made by Frank Goodwin of Valley canoe products and UK surf skis in south Wales
They were part of surf canoeing discipline managed by British Canoe Union .
Then in late 80s skis separated from Bcu to form the British wave ski assn.
In 1984, waveski surfing became established as an offshoot of surf skiing with the formation of the World Waveski Surfing Association.
In the television series Magnum, P.I., the character Thomas Magnum was often seen on a surf ski.