Système d'aide à la conduite, à l'exploitation et à la maintenance


The Système d'aide à la conduite, à l'exploitation et à la maintenance is an embedded, automatic speed train protection system for rapid transit railways. The name means "Driver Assistance, Operation, and Maintenance System".
It was developed in France by GEC-Alsthom, Matra and CSEE in the 1980s. It was first deployed on the RER A suburban railway in Paris in 1989.
Afterwards it was installed:
In 2017 the SACEM system in Paris was enhanced with Automatic Train Operation and was put in full operation at the end of 2018.
The SACEM system in Paris is to be enhanced to a fully fledged CBTC system named NExTEO. First to be deployed on the new prolongated line RER E in 2024, it is proposed to replace signalling and control on all RER lines.

Operation

The SACEM system enable a train to receive signals from devices under the tracks. A receiver in the train cabin interprets the signal, and sends data to the console so the driver can see it. A light on the console indicates the speed control setting: an orange light means "Jog Mode", or ; a red light means full stop. If the driver alters the speed, a warning buzzer may sound. If the system determines that the speed might be unsafe, and the driver does not change it within a few seconds, SACEM engages the emergency brake. SACEM also allows for a reduction in potential train bunching and easier recovery from delays, therefore safely increasing operating frequencies as much as possible especially during rush hour.