THK-13


The THK-13 was an experimental tail-less glider built by the Turk Hava Kurumu Ucak Fabrikasi in Turkey in the late 1940s.

Design and development

The THK-13 was a tail-less glider, built predominantly from wood with fabric covering, with the pilot sitting in a faired open cockpit on the centre-line at mid-chord. The aircraft was controlled through ailerons on the inner portion of the trailing edges with pitch control through elevators outboard of the fins, situated at approximately ¾-span giving yaw control and stability. The undercarriage was of the mono-wheel type, common to many gliders, but with outrigger wheel struts in the lower fins keeping the aircraft level when on the ground.

Operational history

To validate the design a 10% scale model was attached to a THK-5 and used as a flying wind tunnel, to validate the design values. The THK-13 was initially planned to have a small piston engine or turbojet, but was completed as a glider, principally launched by aero-tow behind a Focke-Wulf Fw 44. The first flight took place in mid 1948, flown by Kadri Kavukçu, lasting for around 30 minutes. Modifications were carried out before the next flight in August 1948, flown by Cemal Uygun. The aircraft took-off, but at the right wing dropped, caused by a control restriction, so Uygun carried out an emergency landing, with the aircraft suffering some damage. Repairs were carried out and flight tests resumed, revealing poor yaw stability and heavy rudder forces. The rudders were reduced in area shortly before the THK-13 was exhibited at the 1949 Paris Air Show. Further development of the THK-13 was abandoned when THK's priorities were re-aligned.

Specifications (THK-13)