TIE fighter
TIE fighters are fictional starfighters existing in the Star Wars universe. Propelled by Twin Ion Engines, TIE fighters are fast, agile, yet fragile starfighters produced by Sienar Fleet Systems for the Galactic Empire. TIE fighters and other TIE craft appear in Star Wars films, television shows, and throughout the Star Wars expanded universe. Several TIE fighter replicas and toys, as well as a TIE flight simulator, have been produced and sold by merchandise companies.
Origin and design
's Colin Cantwell created the concept model that established the TIE fighter's ball-cockpit and hexagonal panels design for Star Wars. Star Wars creator George Lucas liked the basic design consisting of two panels connected by a stick with a ball-shaped cockpit, but Cantwell's concept had few details. Joe Johnston created additional details, such as the cockpit window and the attachment points between the solar panels and the hull.Initially given a blue color scheme, the TIE fighter models for the first film were grey to better film against a bluescreen; TIE fighters in The Empire Strikes Back and Return of the Jedi shifted back to being a muted blue. Sound designer Ben Burtt created the distinctive TIE fighter sound effect by combining an elephant call with a car driving on wet pavement. In the book The Sounds of Star Wars, the engine roar is likened to German Junker Ju 87 "Stuka" bombers, who used sirens to frighten civilians on raids. This could have been a possible inspiration for the sound. Combat scenes between TIE fighters and the Millennium Falcon and Rebel Alliance X-wing fighters in Star Wars were meant to be reminiscent of World War II dogfight footage; editors used World War II air combat clips as placeholders while Industrial Light & Magic completed the movie's special effects. Darth Vader's distinct TIE Advanced x1 in Star Wars was designed to make it instantly recognizable, and the TIE Interceptors developed for Jedi were designed to look fast, deadly, sleek and frightening.
The Jedi starfighter, created for ' , was designed to bridge the appearance of the Jedi starfighter in ' and the TIE fighter design from the original trilogy. The V-wing starfighter, seen at the end of Revenge of the Sith, also makes the distinctive TIE fighter sound when flying by a Star Destroyer. Dark Horse Comics' Sean Cooke designed the TIE predator for ', set 130 years after the events of Star Wars, to appear both reminiscent of and more advanced than the original TIE fighter.
Designers for ' had numerous discussions about how much to "update" the TIE fighter for the first sequel film set 30 years after Return of the Jedi. They retained the starfighter's design but altered its aesthetic to suggest improvements to the vessel's manufacturing process and materials.
Depiction
Star Wars literature states that Grand Moff Tarkin commissioned Sienar-Jaemus Fleet Systems to design and manufacture the Twin Ion Engine/ln starfighter and most TIE variants. Tarkin specified that the TIE had to be fast, maneuverable, energy efficient, and inexpensive; simply put they are meant to be easily mass produced and engage in swarm tactics, with the expectation of being expendable assets that would be lost in combat. TIE fighters' solar panels power a twin ion engine system that accelerates gases at a high speed along almost any vector, affording the ships tremendous speed and maneuverability. Described as lacking a hyperdrive or shield generators, the fragile TIE fighters are deployed in large numbers from bases or larger ships; a Star Destroyer carries a wing of 72 various TIE craft. Expanded Universe material holds that TIE fighter pilots, who undergo intense physical and psychological testing, are trained to be intensely loyal to Emperor Palpatine and the Empire, willing to sacrifice themselves and their wingmates to accomplish their mission. TIE pilots were seen as expendable assets, as it was far cheaper to manufacture a great deal of standardized spacecraft in overwhelming numbers than it was to fully equip the craft. A TIE fighter consists of the absolute minimum necessary to function as a spacecraft, being essentially nothing more than a cockpit with an engine and weapons. Although Expanded Universe material often describes TIE fighters as lacking an ejection seat, the player can eject from TIE craft in LucasArts' flight simulator. During the events of The Force Awakens, the First Order sees the value in its TIE pilots and equips its TIE fighters with shields to protect their occupants, with Special Forces models further equipped with missiles and a co-pilot/gunner seat. A TIE fighter stolen by Poe Dameron and Finn in The Force Awakens has a gunner seat at the back along with an ejection seat, allowing both characters to survive a crash.TIE variants
In addition to the standard TIE/ln fighter, a variety of other TIE craft appear throughout the films. Darth Vader flies a TIE Advanced x1 in many media, most notably in Episode IV; its prototype precursor, the TIE Advanced v1, was retroactively featured in Star Wars Rebels. The Empire Strikes Back introduces a TIE/sh shuttle and TIE/sa bombers, which ferry Captain Needa to Darth Vader's Super Star Destroyer and bomb asteroids in the hunt for the Millennium Falcon, respectively. Both TIE craft have a design that stems from an unused "TIE boarding craft" concept developed for A New Hope. The TIE bomber's double-hull design led ILM's modelmakers to dub the ship a "double chili dog" fighter. The TIE/sa was also the inspiration for the triple-hulled TIE lander, featured in Star Wars #60 and in Star Wars: Complete Locations. TIE/IN interceptors — faster TIE fighters with dagger-shaped wings in the forward profile of those of the TIE Advanced and four laser cannons — appear at various points in Return of the Jedi. Two scales of TIE interceptor models were used during filming. In the Legends continuity, red modified TIE interceptors are also used by the Emperor's Royal Guards, as featured in Rage of the Wookiees, another expansion of Star Wars Galaxies. The Force Awakens features First Order TIE/fo "space superiority fighters" that have deflector shields and Special Forces TIE/sf fighters with heavier weapons, a hyperdrive, and shields. "Flatter, fang-like" TIE strikers appear in Rogue One. ' also features the TIE/vn silencer, the Interceptor-winged personal starfighter of Kylo Ren, replaced in ' with an model even more similar to the Interceptor called the TIE whisper. A red triangular-winged model called the TIE dagger is also featured in the latter film.Additionally, LucasArts Star Wars video games introduce several TIE variants, such as the TIE Hunter starfighter in ' and the TIE Mauler surface vehicle in '. The TIE/ad fighter and TIE/D Defender — heavily upgraded derivatives of previous craft seen in the Star Wars universe — first appear in TIE Fighter as player-pilotable craft. The plot of ' revolves around destroying the Empire's ability to manufacture the cloaking TIE Phantom starfighter, and a campaign in ' centers on destroying experimental remote-controlled TIE fighters. Star Wars Rebels introduces the experimental TIE Advanced v1 model used by Imperial Inquisitors and Baron Valen Rudor and reintroduces the TIE Defender, a craft first featured in the ' flight simulator, now as a prototype made by Grand Admiral Thrawn.
Star Wars literature also introduces TIE varieties. TIE raptors attack Rogue Squadron in Solo Command. TYE wings — TIE fighter and Y-wing hybrids — appear both in I, Jedi and '. Dark Horse's Dark Empire introduces both the droid-piloted TIE/D and the TIE crawler "century tank". West End Games' roleplaying sourcebooks introduce varieties that include the TIE/fc fire-control support ship, the TIE/gt ground-attack fighter, the TIE/rc reconnaissance vessel, and the TIE scout.
Cultural impact
A TIE fighter model used in filming the climax of Star Wars sold at auction for $350,000, and another TIE fighter from the film sold at auction for $402,500. Fans built a 16-foot-by-20-foot, 1,000-pound TIE fighter float to commemorate Star WarsKenner released TIE fighter and TIE interceptor toys during the original Star Wars trilogy's theatrical release, and Kenner's die-cast TIE bomber is a rare collector's item. Hasbro also released TIE fighter, TIE bomber, and TIE interceptor toys. Both Kenner and Hasbro also manufactured TIE fighter pilot action figures. Lego manufactured TIE fighter, TIE bomber, TIE interceptor, TIE defender, and TIE advanced models. Decipher and Wizards of the Coast published various TIE starfighter and TIE-related cards for the Star Wars Customizable Card Game and Star Wars Trading Card Game, respectively. In 2012, Fantasy Flight Games released ', a miniatures game with pre-painted and to scale miniature X-wings and TIE fighters. In 1994, LucasArts released the ' flight simulator, which casts the player as an Imperial pilot flying a variety of TIE starfighters. TIE starfighters and their variants are also playable in third- or first-person perspectives in several Star Wars titles.