Tax horsepower


The tax horsepower or taxable horsepower was an early system by which taxation rates for automobiles were reckoned in some European countries such as Britain, Belgium, Germany, France and Italy; some US states like Illinois charged license plate purchase and renewal fees for passenger automobiles based on taxable horsepower. The tax horsepower rating was computed not from actual engine power but by a mathematical formula based on cylinder dimensions. At the beginning of the twentieth century, tax power was reasonably close to real power; as the internal combustion engine developed, real power became larger than nominal taxable power by a factor of ten or more.

Britain

The so-called RAC horsepower rating was devised in 1910 by the RAC at the invitation of the British government. The formula is:
The formula was calculated from total piston surface area. The factor of 2.5 accounts for characteristics that were widely seen in engines at the time, such as a mean effective pressure in the cylinder of and a maximum piston speed of.
The system introduced a somewhat progressive way of taxing higher-value cars more than low-cost ones but was also introduced to protect the domestic British motor industry from foreign imports, especially the Ford Model T. Henry Ford's mass production methods meant that the Model T was competitively priced with British-built cars despite being a much larger, more durable and more powerful car than other available similarly-priced models. In 1912 Ford opened a factory to build Model Ts in Manchester, to circumvent the import tariffs that, up to that point, had increased the effective price of foreign cars. Under the RAC's formula the Model T was now a 22 'tax horsepower' car, making it much more expensive to run than its British-built rivals on sale for the same price.
At first the RAC rating was usually representative of the car's actual horsepower, but as engine design and technology progressed in the 1920s and 1930s these two figures began to drift apart, with an engine making much more power than its RAC rating suggested: by 1924 the Austin Seven's engine produced 10.5 brake horsepower, 50% more than its official rating. and many others
It was common for the name of a model to include both its RAC tax horsepower and its actual power output, such as the Wolseley 14/60 and the Alvis 12/70 of 1938 – note that the Alvis's engine produces more brake horsepower than the Wolseley but has a lower rating under the RAC system and thus would be taxed less. By 1948 the Standard Flying Twelve, a typical mid-size saloon, produced from a engine or nearly four times as much horsepower as the RAC system suggested, even though manufacturers were still restricted to making slow-revving engines with narrow bores and long strokes to keep abreast of the tax structure.
To minimise tax ratings British designers developed engines with very long stroke and low piston surface area. Another effect was the multiplicity of models: Sevens, Eights, Nines, Tens, Elevens, Twelves, Fourteens, Sixteens etc. each to fit with a taxation class. Larger more lightly stressed engines may have been equally economical to run and, in less variety, produced much more economically.
The system discouraged manufacturers from switching to more fuel-efficient overhead valve engines as these generally required larger bores, while the established sidevalve layout could easily use very narrow bores. Despite OHV engines having significant benefits in economy, refinement and performance the RAC system often made these engines more expensive to run because it placed them in a higher tax class than sidevalve engines of identical power output.
British cars and cars in other countries applying the same approach to automobile taxation continued to feature long thin cylinders even in the 1950s and 1960s, after taxation had ceased to be based on piston diameters, partly because limited funds meant that investment in new models often involved new bodies while under the hood/bonnet engines lurked from earlier decades with only minor upgrades such as higher compression ratios as higher octane fuels slowly returned to European service stations.
The emphasis on long strokes, combined with the nature of British roads in the pre-motorway era, meant that British engines tended to deliver strong low- and mid-range torque for their size but have low maximum speeds. The long stroke also meant that piston speeds and the load on the big end bearings became excessive at higher cruising speeds. Many smaller British cars did not cope well with sustained cruising at or more, which led to reliability problems when the vehicles were exported to other markets, especially the United States. Cars such as the Austin A40, the Morris Minor and the Hillman Minx all achieved notable sales in the US in the late 1940s until the short service life of the engines when asked to routinely drive long distances at freeway speeds became clear. Other imports, notably the Volkswagen Beetle, which originated in countries with different tax rules and existing high speed road networks, proved more reliable and achieved much greater success.
The distortive effects on engine design were seen to reduce the saleability of British vehicles in export markets. While the system had protected the home market from the import of large-engined low-priced American vehicles the need for roomy generously proportioned cars for export was now paramount and the British government abandoned the tax horsepower system with effect from 1 January 1947 replacing it at first with a tax on cubic capacity, which was in turn replaced by a flat tax applying from 1 January 1948.

United States

During the early twentieth century, automobiles in the United States were specified with a figure identical to RAC horsepower and computed using the same formula; this was known either as "NACC horsepower", "ALAM horsepower", or "SAE horsepower". This value was sometimes used for taxation and license fee purposes.

Continental Europe

Although tax horsepower was computed on a similar basis in several other European countries during the two or three decades before the Second World War, continental cylinder dimensions were quoted in millimeters. As a result of roundings when converting the formula between the two measurement systems, a British tax horse-power unit ended up being worth 1.014 continental tax horse-power units.

Belgium

In Belgium, the tax power depended on the cubic capacity of the engine in cubic centimeters at the rate of 1 tax horse power for every.

France

The Cheval Fiscal, often abbreviated to CV from "chevaux-vapeur" in tax law, is used for the issuing of French registration certificates known as "grey cards". It is an administrative unit originally calculated partly from the power of the engine and used to calculate the amount of tax that may be due at the time of registration.
Its use in France dates from 1 January 1913. It was updated in 1956 with further revisions in 1978 and a new emission based system introduced in 1998.
It was originally defined using the following formula:
In a circular issued on 28 December 1956, the chevaux fiscaux was defined as:
where :
The result is multiplied by 0.7 for a diesel engine.

1978 formula

A new system was announced on 23 December 1977 to come into force on 1 January 1978 calculated by the following formula:
where :
Since July 1998, the fiscal tax has depended on a standardised value of carbon dioxide emissions in grams per kilometer and the maximum engine power in kilowatts. If C is the amount of released and P the engine power, then:
is expressed in horsepower, rounded to the nearest integer. The official emission rate of included in the calculation is taken from the European certificate of conformity.

Germany

Tax horse-power was introduced in Germany on 3 June 1906 however in contrast to many regions, i.e. British and French tax horsepower formulae above, it was calculated based on the overall engine displacement from its implementation.
The German formula applied a higher tax horse-power factor to two stroke engine cars than to four stroke engined cars based on the fact each cylinder in a two stroke engine fires every revolution where an otto cycle or 4 stroke cylinder only fires every second revolution.
The formula for tax horsepower was as follows:
In these formulae:
Incomplete fractions were rounded up to the nearest whole number so a four stroke engined car of would end up designated as a 4 PS car for car tax purposes.
After April 1928, recognizing the logic of the linear relationship between tax horsepower and engine capacity, the authorities simply set car tax rates according to engine size for passenger cars. Attempts to correlate new tax horsepower values with old ones result in small differences due to roundings used in the new formula which are, for most purposes, unimportant.
In 1933 the Hitler government came into power and identified promotion of the auto-industry as key to economic recovery: new cars purchased after April 1933 were no longer burdened by an annual car tax charge and German passenger car production surged from 41,727 in 1932 to 276,804 in 1938. Thereafter war and military defeat led to a change in car tax policy and after 1945 tax horse-power returned in West Germany, applying the 1928 formula, as a determinant of annual car tax on new cars purchased in or after 1945. However, the introduction of tax on road fuel in 1951 and progressive increases in fuel tax thereafter reduced the importance of annual car tax so that today far more of the tax on car ownership is collected via fuel taxes than via annual car tax.

Italy

Fiscal horsepower is still used in Italy for insurance purposes; it was formerly used also for car property taxation and it is based on engine displacement.

Spain

Fiscal horsepower also lives on in Spain, but is defined simply in terms of overall engine capacity. It therefore encourages small engines, but does not influence the ratio of cylinder bore to stroke. The current Spanish definition does, however, add a factor that varies in order to favour four-stroke engines over two-stroke engines.
where

Switzerland

The 26 cantons of Switzerland used a variety of different taxation methods. Originally, all of Switzerland used the tax horsepower, calculated as follows:
or times engine displacement in cc
The limits between the horsepower denominations were drawn at either 0.49, 0.50, or 0.51 in different cantons. Thus, the eight horsepower category would cover cars of about 7.5–8.5 CV. In 1973 Berne switched to a taxation system based on vehicle weight, and a few other cantons followed. In 1986 Ticino switched to a system based on a calculation including engine size and weight. Nonetheless, the tax horsepower system remains in effect for seven cantons as of 2007. The plethora of different taxation systems has contributed to there always being an uncommonly wide variety of different cars marketed in Switzerland.

Impact on engine design and on auto-industry development

The fiscal benefits of reduced cylinder diameters in favor of longer cylinders may have been a factor in encouraging the proliferation of relatively small six-cylinder-engined models appearing in Europe in the 1930s, as the market began to open up for faster middle-weight models. The system clearly perpetuated side-valve engines in countries where the taxation system encouraged these engine designs, and delayed the adoption of overhead valve engines because the small cylinder diameter reduced the space available for overhead valves and the lengthy combustion chamber in any case reduced their potential for improving combustion efficiency.
Another effect was to make it very expensive to run cars imported from countries where there was no fiscal incentive to minimise cylinder diameters: this may have limited car imports from the US to Europe during a period when western governments were employing naked protectionist policies in response to economic depression, and thereby encouraged US auto-makers wishing to exploit the European auto-markets to set up their own dedicated subsidiary plants in the larger European markets.
Taxation can modify incentives and tax horsepower is no exception. Large capacity engines are penalized, so engineers working where engine capacity is taxed are encouraged to minimize capacity. This rarely happened in the US, where license plate fees, even adjusted for horsepower ratings, were comparatively much lower than European car taxes.

Naming and classification of individual car models

The tax horsepower rating was often used as the car model name. For example, the Morris Eight got its name from its horsepower rating of eight; not from the number of cylinders of the engine. British cars of the 1920s and 1930s were frequently named using a combination of tax horsepower and actual horsepower – for example, the Talbot 14-45 had an actual power of and a tax horsepower of only 14 hp. The Citroën 2CV was the car that kept such a name for the longest time.