THF can also be synthesized by catalytic hydrogenation of furan. This allows certain sugars to be converted to THF via acid-catalyzed digestion to furfural and decarbonylation to furan, although this method is not widely practiced. THF is thus derivable from renewable resources.
The other main application of THF is as an industrial solvent for polyvinyl chloride and in varnishes. It is an aprotic solvent with a dielectric constant of 7.6. It is a moderately polar solvent and can dissolve a wide range of nonpolar and polar chemical compounds. THF is water-miscible and can form solid clathrate hydrate structures with water at low temperatures. THF has been explored as a miscible co-solvent in aqueous solution to aid in the liquefaction and delignification of plant lignocellulosic biomass for production of renewable platform chemicals and sugars as potential precursors to biofuels. Aqueous THF augments the hydrolysis of glycans from biomass and dissolves the majority of biomass lignin making it a suitable solvent for biomass pretreatment. THF is often used in polymer science. For example, it can be used to dissolve polymers prior to determining their molecular mass using gel permeation chromatography. THF dissolves PVC as well, and thus it is the main ingredient in PVC adhesives. It can be used to liquefy old PVC cement and is often used industrially to degrease metal parts. THF is used as a component in mobile phases for reversed-phase liquid chromatography. It has a greater elution strength than methanol or acetonitrile, but is less commonly used than these solvents. THF is used as a solvent in 3D printing when using PLA plastics. It can be used to clean clogged 3D printer parts, as well as when finishing prints to remove extruder lines and add a shine to the finished product. Recently THF is used as co-solvent for lithium metal batteries, helping to stabilize the metal anode.
Laboratory use
In the laboratory, THF is a popular solvent when its water miscibility is not an issue. It is more basic than diethyl ether and forms stronger complexes with Li+, Mg2+, and boranes. It is a popular solvent for hydroboration reactions and for organometallic compounds such as organolithium and Grignard reagents. Thus, while diethyl ether remains the solvent of choice for some reactions, THF fills that role in many others, where strong coordination is desirable and the precise properties of ethereal solvents such as these allows fine-tuning modern chemical reactions. Commercial THF contains substantial water that must be removed for sensitive operations, e.g. those involving organometallic compounds. Although THF is traditionally dried by distillation from an aggressive desiccant, molecular sieves are superior.
THF is a relatively nontoxic solvent, with the median lethal dose comparable to that for acetone. Reflecting its remarkable solvent properties, it penetrates the skin, causing rapid dehydration. THF readily dissolves latex and is typically handled with nitrile or neoprene rubber gloves. It is highly flammable. One danger posed by THF follows from its tendency to form highly explosive peroxides on storage in air. To minimize this problem, commercial samples of THF are often inhibited with butylated hydroxytoluene. Distillation of THF to dryness is avoided because the explosive peroxides concentrate in the residue.
Oxolanes
Tetrahydrofuran is one of the class of pentic cyclic ethers called oxolanes. There are seven possible structures, namely,
Monoxolane, the root of the group, synonymous with tetrahydrofuran
