Thomas Built Buses


Thomas Built Buses, Inc. is an American bus manufacturer. Best known for its production of yellow school buses, Thomas produces other bus designs for a variety of usages; currently, its production is concentrated on school buses and activity buses and their commercial derivatives.
Founded in 1916 as Perley A. Thomas Car Works, the company was renamed in 1972 to better represent its primary product lines. Headquartered in High Point, North Carolina since 1916, Thomas has been a subsidiary of Daimler Trucks North America since 1998. Prior to its acquisition, the company was operated by the Perley A. Thomas family, the final major school bus manufacturer operated under family control.
Since 1936, Thomas has produced school buses in High Point, North Carolina. In addition to bus bodies, the company also produces vehicle chassis for its Saf-T-Liner/Transit Liner EFX and HDX buses.

History

Foundation

The oldest surviving bus manufacturer in North America, Thomas Built Buses traces its roots to 1916. Following the closure of streetcar manufacturer Southern Car Company, Perley A. Thomas founded a company specializing in fireplace mantles and home furnishings. In the summer of 1916, Thomas shifted from furniture to streetcar construction, as he secured a contract to enclose existing streetcars in Charlotte, North Carolina, renovating them in a car barn.
In the summer of 1916, Thomas Car Works was founded; with a $6,000 loan, Thomas acquired the equipment of Southern Car Works at auction, opening an assembly facility in a former ice manufacturing plant in High Point. During 1917, the company renovated 9 streetcars for the United States Navy in Mobile, Alabama, and for the city of Montgomery, Alabama.
1918 marked several milestones for the company, as Thomas Car Works began production of brand-new streetcars; 25 were produced. All-steel bodies were produced by the company for the first time, quickly overtaking wooden designs. At the end of 1918, the company began construction on larger factory, a 30-acre facility outside of High Point allowing for both construction and repair of streetcars.

1920s

While best known from their use in New Orleans, Perley Thomas streetcars produced during the 1920s would also be utilized by communities across the United States, including Charlotte, NC; Chicago, IL; Detroit, MI; Miami, FL; Mobile, AL; New York City; Philadelphia, PA; Washington, DC, and exported as well, with Havana, Cuba as a user.
In total, Thomas Car Works produced approximately 400 streetcars from 1918 to 1930; at its peak, the company was the fourth-largest manufacturer of streetcars in the United States.

New Orleans streetcars

In 1921, Thomas Car Works secured its largest order for streetcars. In New Orleans, NOPSI decided to standardize their streetcar fleet upon 150 Thomas-designed streetcars, delivered from 1921 to 1924. Unable to fill the massive order on their own, Thomas subcontracted a portion to Philadelphia-based competitor J. G. Brill.
In September 1922, after Thomas delivered 25 streetcars to NOPSI, the High Point factory was destroyed by fire, causing $225,000 in damage and destroying 14 streetcars under construction. Following the fire, Perley Thomas secured a $100,000 advance from NOPSI, rebuilding the factory and securing parts to build 55 more streetcars; 25 more were completed by the end of 1923.
As of 2020, the New Orleans Regional Transit Authority operates 35 Perley Thomas 900-series streetcars in active daily use ; the streetcars date from 1923 and 1924.

1930s

In 1930, Thomas Car Works was reincorporated as a stock company, with Perley Thomas making his family stockholders in Perley A. Thomas Car Works, Inc. For the last time, the company received an order for streetcars, producing 4 for Mobile, Alabama. While rail-based streetcars offered higher capacity, for public transit, automotive-based buses grew in popularity as they offered a greater degree of routing flexibility. In a transition away from streetcars, Thomas produced its first trolley bus in 1933; while still drawing power from overhead wires, a trolley bus was constructed from a bus chassis. For 1934, the company produced 10 transit buses for South Carolina-based Duke Power.
Following the collapse of its primary source of revenue, Thomas Car Works diversified its work, expanding into automotive refinishing and construction of bus and truck bodies. From 1929 to 1934, the company workforce decreased from 125 to nearly 10. Eventually, a company creditor filed for receivership, with the lack of potential buyers allowing for the survival of the company.

Transition to bus construction

In 1936, Thomas Car Works secured part of a bid to produce 500 school bus bodies for North Carolina. As the company was only financially able to acquire materials for 200 bodies, North Carolina split the bid between Thomas and Hackney Brothers. Dependent on length, Thomas offered wood-bodied school buses for $195 to $225. Following the completion of its second school bus bid in 1937, the company focused nearly all production on school bus bodies. In what is a long tradition that continues to the present day, Thomas remains the primary supplier of school buses to North Carolina.
In 1938, several major innovations were introduced by the company to its school bus design, including its first steel-bodied school bus. While Perley Thomas streetcars had adopted steel construction in 1918, school bus design had slowly evolved from farm wagons, with wooden body construction continuing into the 1930s. Although not the first to construct an all-steel body, Thomas introduced one-piece roof bows, internal roll bars welded to each side of the floor/frame structure. While the design has been updated for added strength, the one-piece roof bow is in use in all school buses manufactured in North America today. In another innovation, Thomas introduced an outward-opening entry door, designed to aid egress in emergency evacuation situations.

1940s

In 1940, day-to-day operation of Thomas Car Works was turned over from Perley Thomas to his three children. John W. Thomas managed company operations along with sales, along with James Thomas handling the High Point factory. Following the outbreak of World War II, as with its competitors, Thomas bus production was shifted towards the armed forces. In a contract shared with Ward Body Works, Thomas also produced various bodies for the GMC CCKW truck.
While the war had brought school bus production to a halt, the High Point factory remained utilized in civilian capacity. To supplement its armed forces production, Thomas Car Works was put to use by refurbishing streetcars. As rationing had placed increased demands on public transportation, the upkeep of existing equipment was considered a priority.
Following World War II, with a rise in student populations, Thomas Car Works began to expand its sales market beyond the South, opening dealerships across the eastern half of the United States. To better weatherproof its entry door, the company developed a reinforced rubber-covered door hinge; the rubber also covered the gap between the two door panels as they closed.
After World War II, a third generation of the family joined the company, with John W. Thomas, Jr. and Perley Thomas II, with the former becoming director of sales and the latter taking over control of government contracts.

1950s

During the decade, Thomas Car Works began exports of its product lines, establishing satellite facilities in Ecuador and Peru. From North Carolina, bodies were shipped to South America in CKD form for final assembly on locally sourced chassis.
In 1957, the Thomas Saf-T-Liner name made its first appearance, denoting updated bus bodies. Used full-time by 1972, the name remains in use for all full-size Thomas buses over 60 years later.
Company founder Perley Thomas died in 1958 at the age of 84; at the time of his death, Thomas retained his title of company president and also actively served as a design consultant.

1960s

In 1962, Thomas Car Works officially expanded its production beyond High Point as Thomas Built Buses of Canada, Ltd. was established in Woodstock, Ontario. At the time, the company became the third-largest producer of school buses in the United States.
To demonstrate the strength of its internal roof bows, Thomas stacked a full-size school bus on the roof of another in 1964; the company has subsequently repeated the demonstration several times using more recent product lines.
For 1967, to reduce blind spots in front of the bus, Thomas developed a convex blind-spot mirror. Initially mandated in North Carolina, the device became adopted by 16 other states in only two years. In various forms, blind-spot mirrors are currently required on all school buses in North America.

1970s

In the early 1970s, Thomas underwent a number of major transitions in company leadership and market positioning. Company president John W. Thomas died in 1972, giving leadership to his brother James Thomas, who retired within a year. A third generation of the Thomas family assumed control of the company leadership, with John Thomas, Jr. and Perley Thomas II.
As Thomas Car Works had ended its involvement with streetcars since World War II, the new generation of company leaders chose a new name for the company tied closer to its current product lines; in 1972, Perley A. Thomas Car Works was renamed Thomas Built Buses, Inc.

Expanded school buses

Since producing its first school bus in 1936, virtually all Thomas school bus bodies had been produced in the "conventional" style: a body mated to a cowled truck chassis. While the design was the most popular configuration, the transit-style configuration allowed for a higher passenger capacity. In the early 1970s, Thomas developed the Saf-T-Liner ER as an alternative to the Blue Bird All American. In line with other body manufacturers, Thomas was dependent on a second-party manufacturer for rear-engine chassis.
For 1972, the Saf-T-Liner body underwent a major redesign. Along with extending the rub rails completely around the body, the front and rear roof caps were flattened, and the windshield was enlarged. Following the addition of safety upgrades to comply with safety mandates in 1977, the Saf-T-Liner body saw use in the Conventional through the end of 2006; in modified form, it remains in use with the EFX and HDX. At the smaller end of the size scale, the Saf-T-Liner body was resized to produce the Mighty Mite, a narrow-body school bus on a shorter-wheelbase conventional chassis.
In 1978, Thomas made a major change to the production of the Saf-T-Liner ER. Coinciding with a design update, Thomas introduced a company-sourced chassis, along with the front-engine Saf-T-Liner EF. With the introduction of the EF, Thomas became the first school bus manufacturer to produce its own chassis for both front and rear-engine school buses, ahead of Blue Bird by a decade. As a competitor to the Blue Bird Mini Bird and Carpenter Cadet, Thomas reintroduced the Mighty Mite as a Type B bus, a school bus body paired with a stripped chassis.

1980s

The late 1970s and early 1980s was a period of struggle for all school bus manufacturers. Coupled with the slow economy, manufacturers could no longer count on the factor that had driven school bus sales for the past two decades: the entirety of the baby-boom generation had finished school; it would be years before student populations would create sufficient demand again. During this time, a number of manufacturers either encountered financial difficulty or closed their doors altogether.
At the beginning of the decade, Thomas introduced a new logo, displayed on the roofline of its buses; a "T-bus" logo replaced the previous scripted "Thomas Built Buses" company logo.
To better secure the future of the company, the Thomas family sought to raise capital for Thomas Built Buses, leading the company board to bring in the Odyssey Group investment firm to oversee the process. In return, Odyssey Group received a stake in the company.
In the early 1980s, Thomas launched a diversification of its product line, expanding its presence in the transit bus segment. Derived from the Saf-T-Liner, the Transit Liner was developed for commercial use. In 1982, the CL960 "Citiliner" was introduced as a dedicated transit bus; while sharing its underpinnings with the Saf-T-Liner ER, the two-door CitiLiner was rebodied. Sharing its body with the CL960, the Chartour was developed for charter use, using a single entry door.

Product innovations

Following the mid-1970s launches of the Wayne Busette and Blue Bird Micro Bird, Thomas would launch its own cutaway-chassis school bus, the Thomas Minotour, in 1980. Alongside the small Minotour, Thomas introduced the WestCoastER, a heavy-duty variant of the Saf-T-Liner ER marketed against Crown Supercoach and Gillig Phantom school buses. Sold only in 84 and 90-passenger configurations, the WestCoastER used heavier-duty driveline and suspension components; tandem rear axles were offered as an option.
In the late 1980s, the Saf-T-Liner product line adopted the MVP suffix, standing for Maneuverability, Visibility, and Protection.
In 1989, Thomas introduced a second conventional-style bus to its model line, launching the Thomas Vista school bus. To optimize forward sightlines for drivers, the layout of the driver's compartment and forward chassis were redesigned. Along with a shorter hood and redesigned windshield, the engine and front axle were repositioned. In contrast to a standard conventional bus, the driver of the Vista sat beside the engine.

1990s

In 1991, the Saf-T-Liner transit-style buses saw their first redesign since 1978. The ER and WestCoastER were given a much larger windshield, redesigned drivers' compartment, and saw the introduction of several new diesel engines. To better compete with the Blue Bird TC/2000 and Ward Senator, Thomas replaced the Saf-T-Liner EF with the All Star, using an Oshkosh-produced chassis. The Thomas Vista continued production, shifting chassis in 1991 from General Motors to a variant of Navistar chassis shared with the Saf-T-Liner Conventional.
In 1992, the fourth generation of the Thomas family took over daily operations of the company.
During the mid-1990s, the company began development of environmentally cleaner buses, with compressed natural gas school buses entering production in 1993; several battery-electric school buses were produced in 1994 as prototype vehicles.
By 1996, Thomas had become the largest school bus manufacturer in the United States. To keep up with added demand, the company opened a third factory in Monterrey, Mexico. As a design change, the "T-bus" roof emblem was replaced by a scripted Thomas Built Buses emblem.
During the later 1990s, Thomas Built Buses would undergo a number of significant changes, with some that have changed the future of school bus manufacturing. For the 1997 model year, Freightliner introduced the Freightliner FS-65 school bus chassis. Derived from the Freightliner FL60/FL70 medium-duty trucks introduced in 1995, the FS-65 chassis was paired with the Saf-T-Liner Conventional body, after several modifications.

Transit expansion

During the 1990s, Thomas modernized and expanded its product range within the transit segment. Alongside the Chartour and CL960/Citiliner, Thomas marketed Transit Liners, commercial derivatives of the Saf-T-Liner school buses, along with commercial versions of the Minotour and Vista. A dedicated transit bus derived from the Saf-T-Liner ER, the TL960 was a two-door bus that offered an integrated wheelchair ramp as an option.
In 1999, Thomas entered a joint venture with British bus manufacturer Dennis to import the Dennis Dart SLF. Following assembly by Thomas in North Carolina; while badged as Thomas vehicles, distribution of the low-floor buses was undertaken by Orion Bus.

Company acquisition

Into the late 1990s, Thomas Built Buses remained a family-owned company, controlled by the fourth generation of the Thomas family and the Odyssey Group. Following the departure of Wayne Wheeled Vehicles from the manufacturing segment, Thomas became the largest manufacturer, holding a 34% market share in 1996. The same year, the Thomas family sold a majority stake of the company to the Berkshire Partners equity firm.
Freightliner entered school bus manufacturing as a chassis producer in May 1996, unveiling the Freightliner FS-65 ; developed in cooperation with Thomas, the first production Freightliner-chassis buses were produced at the beginning of 1997. The product launch marked the first completely new school bus chassis since 1980, with Freightliner becoming the first new cowled-chassis manufacturer since the 1977 withdrawal of Dodge.
Following its collaboration with Thomas in developing the FS-65 chassis, in October 1998, Freightliner acquired Thomas Built Buses in its entirety from the Thomas family and the Berkshire, retaining company president John W. Thomas III. The largest school bus manufacturer in North America at the time, Thomas Built Buses was the last major manufacturer operating under family control. At the time, Freightliner was undergoing a series of company acquisitions to diversify its product range beyond highway trucks. Along with acquiring the rights to the Ford heavy-truck line in 1997, Freightliner acquired Thomas alongside the chassis production of Oshkosh Corporation, American LaFrance.
For school bus manufacturers, the 1990s marked a period of association between major body and chassis manufacturers. In 1991, Navistar began its purchase of AmTran ; a year later, Blue Bird entered in a supply agreement with General Motors for conventional bus chassis. 1998 marked both the purchase of Thomas by Freightliner and the sale of Carpenter to Spartan Motors.
At the end of the 1990s, several changes made to the Thomas product line were related to its purchase by Freightliner. At the end of 1998 production, Navistar ended its chassis production for the Vista; as the Vista body was developed solely for its chassis, Thomas discontinued the model line. While Freightliner did not purchase the Ford medium-duty truck range or the school bus chassis derived from it, Ford ended production of the latter after 1998. Consequently, from 1999 onward, the Saf-T-Liner Conventional was limited to Navistar or Freightliner chassis.

2000s

In the school bus manufacturing segment, the beginning of the 2000s marked a period of uncertainty. In 2001, following the closure of Carpenter, the number of body manufacturers had declined from seven to three in ten years; AmTran would rebrand itself. The acquisition of Thomas by Freightliner brought financial stability to the company.
In the early 2000s, Thomas restructured its manufacturing footprint, centering it around its High Point headquarters. Following the closure of the Monterrey facility in the late 1990s, the company opened a separate facility in High Point for Minotour assembly in 1999; in 2000, a facility was opened to produce Thomas Dennis low-floor buses in Jamestown, North Carolina. Thomas Built Buses of Canada in Woodstock, Ontario, was closed in 2001, with Thomas opening a third school bus assembly facility High Point in 2004.
In 2002, John W. Thomas III retired, becoming the final family member to manage the firm; serving as president since 1992, Thomas remained with the company as a consultant. He was succeeded by John O'Leary, a financially educated manager in charge of the turnaround of parent company Freightliner.
During the 2000s, Thomas began to wind down its presence in the transit bus segment. While the Thomas Dennis SLF found buyers, the product line struggled to gain a foothold against established transit buses; after 2002, the Thomas Dennis joint venture was reorganized by Daimler. The Thomas-designed TL960 was discontinued in 2002, replacing dedicated transit buses with school bus derivatives as Thomas consolidated commercial production to the Transit Liner EF/ER.
In 2005, company founder Perley Thomas became one of the first inductees of the North Carolina Transportation Hall of Fame in Raleigh, North Carolina. In 2007, the North Carolina Transportation Museum received the donation of a 1940 Thomas Car Works school bus from Thomas Built Buses.
Following the 2004 introduction of the Saf-T-Liner C2, Thomas produced the model line along its Saf-T-Liner Conventional predecessor. After nearly 35 years of production of the Saf-T-Liner Conventional body; the 62,764th and final example on the FS-65 chassis was produced on December 13, 2006.

New-generation buses

At the beginning of the 2000s, Thomas began to introduce its most extensive updates to its product lines since the 1970s. For 2001, the Saf-T-Liner HD was introduced. Distinguished by its large mirror housings, the HD also visibly shared several components from Freightliner, including its instrument cluster and headlamps. For 2003, Freightliner became the sole chassis supplier for the Saf-T-Liner Conventional, with all Conventionals becoming Saf-T-Liner FS-65s. In 2004, Thomas renamed the HD the Saf-T-Liner HDX.
Following the 2001 replacement of the FL-series Business Class with the Business Class M2, development was underway on a new-generation Thomas Saf-T-Liner conventional school bus. In 2004, the Thomas Saf-T-Liner C2 made its debut, marking the first completely new bus body from Thomas since 1972. In a shift from industry precedent, both the Thomas body and Freightliner chassis were designed together as a common unit ; as a drawback, the pairing negated the use of the Freightliner C2 chassis by other body builders. In contrast to the Saf-T-Liner Conventional, the C2 is designed with a larger, sloped windshield, larger windows and exits, and different body construction.
For 2009, Thomas launched a second model line of small buses. Named the Thomas MyBus, the model line is geared towards the MFSAB segment. Sharing its internal structure with the Minotour, the non-yellow MyBus is designed for applications without any need for traffic control.

2010-present

In 2010, John O'Leary was succeeded as company president by Kelley Platt; the first female leader of a major school bus manufacturer, Platt served as manager of treasury services during the Freightliner acquisition of Thomas Built Buses.
In 2011, Thomas marked the introduction of the 2012 Saf-T-Liner EFX, its first all-new front-engine bus since 1994. Using similar design features as the Saf-T-Liner HDX, the EFX also utilized a center-mounted Freightliner instrument panel.
During the early 2010s, Thomas expanded its environmentally friendly product line. The Saf-T-Liner C2e hybrid diesel-electric school bus met with little success, leading to its withdrawal in 2013; instead, the company invested in its alternative-fuel product lines. Having offered compressed natural gas since 1993 in the Saf-T-Liner ER, the Saf-T-Liner C2 gained propane and CNG offerings. Alternative fuels became available on the Minotour.
In 2016, Thomas Built Buses marked 100 years since the founding of Perley Thomas Car Works, becoming the first current bus body manufacturer to reach 100 years of production in North America.
In late 2019, Thomas entered into a joint venture with Trans Tech to jointly develop a small school bus. Named the Minotrek, The Ford Transit cutaway-chassis school bus is designed with an aerodynamically enhanced body to optimize fuel economy.

Environmental stewardship

In 2011, the High Point facilities of Thomas Built Buses achieved Zero-Waste-to-Landfill status in its vehicle production. A year later, the company was designated a North Carolina Environmental Steward, citing its superior environmental performance, commitment to continued reduction of its environmental impact, and demonstrated commitment to exceed compliance regulations.
In late 2017, in line with each major school bus manufacturer, Thomas unveiled a fully electric school bus prototype. The Saf-T-Liner C2 Jouley is scheduled to enter full production during 2020.

Products

Thomas Built Buses is a manufacturer of school bus bodies in cutaway van, conventional, and transit-style configurations. Other bodies produced by the company include derivatives of its school bus designs along with buses for commercial use; some vehicles are intended for specialty use.
Alongside diesel-fueled vehicles, dependent on product line, Thomas buses are also offered with alternative-fuel options, including propane, CNG, gasoline, and fully electric powertrains.

School buses

Other buses

Thomas sold commercial derivatives of the Minotour, Conventional, Vista, along with the following: