Toenailing


Toenailing or skew-nailing is a popular technique that carpenters use regularly to fix two timbers together by slanted application. The fasteners, used in pairs, are driven in on opposing angles. This locks the timbers together, to create a stable framework, e.g. in stud walls or roof framing. The angled nailing makes later dismantling difficult or destructive. One of the most common places to toenail a framing member is where a rafter meets the top plate of a wall at the birdsmouth. Alternatives to toenailing include the use of hurricane ties, joist hangers, and other engineered steel connectors that permit nails to be attached perpendicular to a member's surface.
When toenailing, nails can be driven from the inside or outside of the joint, depending on access available to use the hammer. Skew nailing is also a technique used by other woodworkers, for example a drawer or box can be glued and skew-nailed with finer nails or panel pins. Skew nailing will fasten the joint, while the glue sets, avoiding the use of clamps. A variation of toenailing is to use screws for the same purpose, which might be called toenailing or toe-screwing.
Usually called toenailing because the nail or screw is placed at the bottom of the piece of wood.