Totem pole


Totem poles are monumental carvings, a type of Northwest Coast art, consisting of poles, posts or pillars, carved with symbols or figures. They are usually made from large trees, mostly western red cedar, by First Nations and indigenous peoples of the Pacific Northwest coast including northern Northwest Coast Haida, Tlingit, and Tsimshian communities in Southeast Alaska and British Columbia, Kwakwaka'wakw and Nuu-chah-nulth communities in southern British Columbia, and the Coast Salish communities in Washington and British Columbia.
The word totem derives from the Algonquian word odoodem meaning " kinship group". The carvings may symbolize or commemorate ancestors, cultural beliefs that recount familiar legends, clan lineages, or notable events. The poles may also serve as functional architectural features, welcome signs for village visitors, mortuary vessels for the remains of deceased ancestors, or as a means to publicly ridicule someone. They may embody a historical narrative of significance to the people carving and installing the pole. Given the complexity and symbolic meanings of these various carvings, their placement and importance lies in the observer's knowledge and connection to the meanings of the figures and the culture in which they are embedded.

History

Totem poles serve as important illustrations of family lineage and the cultural heritage of the Native peoples in the islands and coastal areas of North America's Pacific Northwest, especially British Columbia, Canada, and coastal areas of Washington and southeastern Alaska in the United States. Families of traditional carvers come from the Haida, Tlingit, Tsimshian, Kwakwaka’wakw, Nuxalk, and Nuu-chah-nulth, among others. The poles are typically carved from the highly rot-resistant trunks of Thuja plicata trees, which eventually decay in the moist, rainy climate of the coastal Pacific Northwest. Because of the region's climate and the nature of the materials used to make the poles, few examples carved before 1900 remain. Noteworthy examples, some dating as far back as 1880, include those at the Royal British Columbia Museum in Victoria, the Museum of Anthropology at UBC in Vancouver, the Canadian Museum of History in Gatineau, and the Totem Heritage Center in Ketchikan, Alaska.
Totem poles are the largest, but not the only, objects that coastal Pacific Northwest natives use to depict spiritual reverence, family legends, sacred beings and culturally important animals, people, or historical events. The freestanding poles seen by the region's first European explorers were likely preceded by a long history of decorative carving. Stylistic features of these poles were borrowed from earlier, smaller prototypes, or from the interior support posts of house beams.
Although 18th-century accounts of European explorers traveling along the coast indicate that decorated interior and exterior house posts existed prior to 1800, the posts were smaller and fewer in number than in subsequent decades. Prior to the 19th century, the lack of efficient carving tools, along with sufficient wealth and leisure time to devote to the craft, delayed the development of elaborately carved, freestanding poles. Before iron and steel arrived in the area, Natives used tools made of stone, shells, or beaver teeth for carving. The process was slow and laborious; axes were unknown. By the late eighteenth century, the use of metal cutting tools enabled more complex carvings and increased production of totem poles. The tall monumental poles appearing in front of native homes in coastal villages probably did not appear until after the beginning of the nineteenth century.
Eddie Malin has proposed that totem poles progressed from house posts, funerary containers, and memorial markers into symbols of clan and family wealth and prestige. He argues that the Haida people of the islands of Haida Gwaii originated carving of the poles, and that the practice spread outward to the Tsimshian and Tlingit, and then down the coast to the indigenous people of British Columbia and northern Washington. Malin's theory is supported by the photographic documentation of the Pacific Northwest coast's cultural history and the more sophisticated designs of the Haida poles.
Accounts from the 1700s describe and illustrate carved poles and timber homes along the coast of the Pacific Northwest. By the early nineteenth century, widespread importation of iron and steel tools from Great Britain, the United States, and elsewhere led to easier and more rapid production of carved wooden goods, including poles.
, British Columbia in the 1900s
In the 19th century, American and European trade and settlement initially led to the growth of totem-pole carving, but United States and Canadian policies and practices of acculturation and assimilation caused a decline in the development of Alaska Native and First Nations cultures and their crafts, and sharply reduced totem-pole production by the end of the century. Between 1830 and 1880, the maritime fur trade, mining, and fisheries gave rise to an accumulation of wealth among the coastal peoples. Much of it was spent and distributed in lavish potlatch celebrations, frequently associated with the construction and erection of totem poles. The monumental poles commissioned by wealthy family leaders to represent their social status and the importance of their families and clans. In the 1880s and 1890s, tourists, collectors, scientists and naturalist interested in native culture collected and photographed totem poles and other artifacts, many of which were put on display at expositions such as the 1876 Centennial Exposition in Philadelphia, Pennsylvania, and the 1893 World's Columbia Exposition in Chicago, Illinois.
In the 19th and early 20th centuries, before the passage of the American Indian Religious Freedom Act in 1978, the practice of Native religion was outlawed, and traditional indigenous cultural practices were also strongly discouraged by Christian missionaries. This included the carving of totem poles. Missionaries urged converts to cease production and destroy existing poles. Nearly all totem-pole-making had ceased by 1901. Carving of monumental and mortuary poles continued in some, more remote Native villages as late as 1905; however, as the original sites were abandoned, the poles and timber homes were left to decay and vandalism.
Beginning in the late 1930s, a combination of cultural, linguistic, and artistic revivals, along with scholarly interest and the continuing fascination and support of an educated and empathetic public, led to a renewal and extension of this artistic tradition. In 1938 the United States Forest Service began a program to reconstruct and preserve the old poles, salvaging about 200, roughly one-third of those known to be standing at the end of the 19th century. With renewed interest in Native arts and traditions in the 1960s and 1970s, freshly carved totem poles were erected up and down the coast, while related artistic production was introduced in many new and traditional media, ranging from tourist trinkets to masterful works in wood, stone, blown and etched glass, and other traditional and non-traditional media.

Meaning and purpose

Totem poles can symbolize the characters and events in mythology, or convey the experiences of recent ancestors and living people. Some of these characters may appear as stylistic representations of objects in nature, while others are more realistically carved. Pole carvings may include animals, fish, plants, insects, and humans, or they may represent supernatural beings such as the Thunderbird. Some symbolize beings that can transform themselves into another form, appearing as combinations of animals or part-animal/part-human forms. Consistent use of a specific character over time, with some slight variations in carving style, helped develop similarities among these shared symbols that allowed people to recognize one from another. For example, the raven is symbolized by a long, straight beak, while the eagle's beak is curved, and a beaver is depicted with two large front teeth, a piece of wood held in his front paws, and a paddle-shaped tail.
The meanings of the designs on totem poles are as varied as the cultures that make them. Some poles celebrate cultural beliefs that may recount familiar legends, clan lineages, or notable events, while others are mostly artistic. Animals and other characters carved on the pole are typically used as symbols to represent characters or events in a story; however, some may reference the moiety of the pole’s owner, or simply fill up empty space on the pole. The carved figures interlock one above the other to create the overall design, which may rise to a height of or more. Smaller carvings may be positioned in vacant spaces, or they may be tucked inside the ears or hang out of the mouths of the pole’s larger figures.
Some of the figures on the poles constitute symbolic reminders of quarrels, murders, debts, and other unpleasant occurrences about which the Native Americans prefer to remain silent... The most widely known tales, like those of the exploits of Raven and of Kats who married the bear woman, are familiar to almost every native of the area. Carvings which symbolize these tales are sufficiently conventionalized to be readily recognizable even by persons whose lineage did not recount them as their own legendary history.

Those from cultures that do not carve totem poles often assume that the linear representation of the figures places the most importance on the highest figure, an idea that became pervasive in the dominant culture after it entered into mainstream parlance by the 1930s with the phrase "low man on the totem pole". However, Native sources either reject the linear component altogether, or reverse the hierarchy, with the most important representations on the bottom, bearing the weight of all the other figures, or at eye level with the viewer to heighten their significance. Many poles have no vertical arrangement at all, consisting of a lone figure atop an undecorated column.

Types

There are six basic types of upright, pole carvings that are commonly referred to as "totem poles"; not all involve the carving of what may be considered "totem" figures: house frontal poles, interior house posts, mortuary poles, memorial poles, welcome poles, and the ridicule or shame pole.

House frontal poles

This type of pole, usually tall is the most decorative. Its carvings tell the story of the family, clan or village who own them. These poles are also known as heraldic, crest, or family poles. Poles of this type are placed outside the clan house of the most important village leaders. Often, watchman figures are carved at the top of the pole to protect the pole owner’s family and the village. Another type of house frontal pole is the entrance or doorway pole, which is attached to the center front of the home and includes an oval-shaped opening through the base that serves as the entrance to the clan house.

House posts

These interior poles, typically in height, are usually shorter than exterior poles. The interior posts support the roof beam of a clan house and include a large notch at the top, where the beam can rest. A clan house may have two to four or more house posts, depending on the cultural group who built it. Carvings on these poles, like those of the house frontal poles, are often used as a storytelling device and help tell the story of the owners' family history. House posts were carved by the Coast Salish and were more common than the free-standing totem poles seen in Northern cultural groups.

Mortuary pole

The rarest type of pole carving is a mortuary structure that incorporates grave boxes with carved supporting poles. It may include a recessed back to hold the grave box. These are among the tallest and most prominent poles, reaching in height. The Haida and Tlingit people erect mortuary poles at the death of important individuals in the community. These poles may have a single figure carved at the top, which may depict the clan's crest, but carvings usually cover its entire length. Ashes or the body of the deceased person are placed in the upper portion of the pole.

Memorial pole

This type of pole, which usually stands in front of a clan house, is erected about a year after a person has died. The clan chief’s memorial pole may be raised at the center of the village. The pole's purpose is to honor the deceased person and identify the relative who is taking over as his successor within the clan and the community. Traditionally, the memorial pole has one carved figure at the top, but an additional figure may also be added at the bottom of the pole.
Memorial poles may also commemorate an event. For example, several memorial totem poles were erected by the Tlingits in honor of Abraham Lincoln, one of which was relocated to Saxman, Alaska, in 1938. The Lincoln pole at Saxman commemorates the end of hostilities between two rival Tlingit clans and symbolizes the hope for peace and prosperity following the American occupation of the Alaskan territory. The story begins in 1868, when the United States government built a customs house and fort on Tongass Island and left the US revenue cutter Lincoln to patrol the area. After American soldiers at the fort and aboard the Lincoln provided protection to the Tongass group against its rival, the Kagwantans, the Tongass group commissioned the Lincoln pole to commemorate the event.

Welcome pole

Carved by the Kwakwaka'wakw, Salish and Nuu-chah-nulth people, most of the poles include large carvings of human figures, some as tall as. Welcome poles are placed at the edge of a stream or saltwater beach to welcome guests to the community, or possibly to intimidate strangers.

Shame/ridicule pole

Poles used for public ridicule are usually called shame poles, and were created to embarrass individuals or groups for their unpaid debts or when they did something wrong. The poles are often placed in prominent locations and removed after the debt is paid or the wrong is corrected. Shame pole carvings represent the person being shamed.
One famous shame pole is the Seward Pole at the Saxman Totem Park in Saxman, Alaska. It was created to shame former U.S. Secretary of State William H. Seward for not reciprocating the courtesy or generosity of his Tlingit hosts following a potlatch given in his honor. The intent of this pole is indicated by the figure's red-painted nose and ears to symbolize Seward's stinginess.
Another example of the shame pole is the Three Frogs pole on Chief Shakes Island, at Wrangell, Alaska. This pole was erected by Chief Shakes to shame the Kiks.ádi clan into repaying a debt incurred for the support of three Kiks.ádi women who were allegedly cohabiting with three slaves in Shakes's household. When the Kiks.ádi leaders refused to pay support for the women, Shakes commissioned a pole with carvings of three frogs, which represented the crest of the Kiks.ádi clan. It is not known if the debt was ever repaid.
The pole stands next to the Chief Shakes Tribal House in Wrangell. The pole's unique crossbar shape has become popularly associated with the town of Wrangell, and continues to be used as part of the Wrangell Sentinel newspaper's masthead.
In 1942, the U.S. Forest Service commissioned a pole to commemorate Alexander Baranof, the Russian governor and Russian American Company manager, as a civilian works project. The pole's original intent was to commemorate a peace treaty between the Russians and Tlingits that the governor helped broker in 1805. George Benson, a Sitka carver and craftsman, created the original design. The completed version originally stood in Totem Square in downtown Sitka, Alaska. When Benson and other Sitka carvers were not available to do the work, the U.S. Forest Service had CCC workers carve the pole in Wrangell, Alaska. Because Sitka and Wrangell native groups were rivals, it has been argued that the Wrangell carvers may have altered Benson's original design. For unknown reasons, the Wrangell carvers depicted the Baranov figure without clothes. Following a Sitka Tribe of Alaska-sponsored removal ceremony, the pole was lowered due to safety concerns on October 20, 2010, using funds from the Alaska Dept. of Health and Social Services. The Sitka Sentinel reported that while standing, it was "said to be the most photographed totem in Alaska". The pole was re-erected in Totem Square in 2011.
On March 24, 2007, a shame pole was erected in Cordova, Alaska, that includes the inverted and distorted face of former Exxon CEO Lee Raymond. The pole represents the unpaid debt of $5 billion in punitive damages that a federal court in Anchorage, Alaska, determined Exxon owes for its role in causing the Exxon Valdez oil spill in Prince William Sound.

Totem poles outside of original context

Some poles from the Pacific Northwest have been moved to other locations for display out of their original context.
In 1903 Alaska’s district governor, John Green Brady, collected fifteen Tlingit and Haida totem poles for public displays from villages in southeastern Alaska. At the Louisiana Purchase Exposition, fourteen of them were initially installed outside the Alaska pavilion at the fair; the other one, which had broken in transit, was repaired and installed at the fair's Esquimau Village. Thirteen of these poles were returned to Alaska, where they were eventually installed in the Sitka National Historical Park. The other two poles were sold; one pole from the Alaska pavilion went the Milwaukee Public Museum and the pole from the Esquimau Village was sold and then given to industrialist David M. Parry, who installed it on his estate in what became known as the Golden Hill neighborhood of Indianapolis, Indiana. Although the remains of the original pole at Golden Hill no longer exist, a replica was raised on April 13, 1996, on the front lawn of The Eiteljorg Museum of American Indians and Western Art in Indianapolis. Approximately two years later, the replica was moved inside the museum, and in 2005, it was installed in a new atrium after completion of a museum expansion project.

Indian New Deal

The Indian New Deal of the 1930s strongly promoted native arts and crafts, and in the totem pole they discovered an art that was widely appreciated by white society. In Alaska the Indian Division of the Civilian Conservation Corps restored old totem poles, copied those beyond repair, and carved new ones. The Indian Arts and Crafts Board, A federal government agency, facilitated their sale to the general public. The project was lucrative, but anthropologists complaining that it stripped the natives of their traditional culture and stripped away the meaning of the totem poles.
Another example occurred in 1938, when the U.S. Forest Service began a totem pole restoration program in Alaska. Poles were removed from their original places as funerary and crest poles to be copied or repaired and then placed in parks based on English and French garden designs to demystify their meaning for tourists.
In England at the side of Virginia Water Lake, in the south of Windsor Great Park, there is a tall Canadian totem pole that was given to Queen Elizabeth II to commemorate the centenary of British Columbia. In Seattle, Washington, a Tlingit funerary totem pole was raised in Pioneer Square in 1899, after being taken from an Alaskan village. In addition, the totem pole collections in Vancouver's Stanley Park, Victoria's Thunderbird Park, and the Museum of Anthropology at the University of British Columbia were removed from their original locations around British Columbia. In Stanley Park, the original Skedans Mortuary Pole has been returned to Haida Gwaii and is now replaced by a replica. In the late 1980s, the remaining carved poles were sent to various museums for preservation, with the then park board commissioning and loaning replacement carvings.

Construction and maintenance

After the tree to be used for the totem pole is selected, it is cut down and moved to the carving site, where the bark and outer layer of wood is removed. Next, the side of the tree to be carved is chosen and the back half of the tree is removed. The center of the log is hollowed out to make it lighter and to keep it from cracking. Early tools used to carve totem poles were made of stone, shell, or bone, but beginning in the late 1700s, the use of iron tools made the carving work faster and easier. In the early days, the basic design for figures may have been painted on the wood to guide the carvers, but today's carvers use paper patterns as outlines for their designs. Carvers use chain saws to make the rough shapes and cuts, while adzes and chisels are used to chop the wood. Carvers use knives and other woodworking tools to add the finer details. When the carving is complete, paint is added to enhance specific details of the figures.
Raising a totem pole is rarely done using modern methods, even for poles installed in modern settings. Most artists use a traditional method followed by a pole-raising ceremony. The traditional method calls for a deep trench to be dug. One end of the pole is placed at the bottom of the trench; the other end is supported at an upward angle by a wooden scaffold. Hundreds of strong men haul the pole upright into its footing, while others steady the pole from side ropes and brace it with cross beams. Once the pole is upright, the trench is filled with rocks and dirt. After the raising is completed, the carver, the carver's assistants, and others invited to attend the event perform a celebratory dance next to the pole. A community potlatch celebration typically follows the pole raising to commemorate the event.
Totem poles are typically not well maintained after their installation and the potlatch celebration. The poles usually last from 60 to 80 years; only a few have stood longer than 75 years, and even fewer have reached 100 years of age. Once the wood rots so badly that the pole begins to lean and pose a threat to passersby, it is either destroyed or pushed over and removed. Older poles typically fall over during the winter storms that batter the coast. The owners of a collapsed pole may commission a new one to replace it.

Cultural property

Each culture typically has complex rules and customs regarding the traditional designs represented on poles. The designs are generally considered the property of a particular clan or family group of traditional carvers, and this ownership of the designs may not be transferred to the person who has commissioned the carvings. There have been protests when those who have not been trained in the traditional carving methods, cultural meanings and protocol, have made "fake totem poles" for what could be considered crass public display and commercial purposes. The misappropriation of coastal Pacific Northwest culture by the art and tourist trinket market has resulted in production of cheap imitations of totem poles executed with little or no knowledge of their complex stylistic conventions or cultural significance. These include imitations made for commercial and even comedic use in venues that serve alcohol, and in other settings that are insensitive or outright offensive to the sacred nature of some of the carvings.
In the early 1990s, the Haisla First Nation of the Pacific Northwest began a lengthy struggle to repatriate a sacred totem from Sweden's Museum of Ethnography. Their successful efforts were documented in Gil Cardinal's
National Film Board of Canada documentary, Totem: The Return of the G'psgolox Pole.
In October 2015 a Tlingit totem Pole was returned from Hawaii to Alaska

Examples

The title of "The World's Tallest Totem Pole" is or has at one time been claimed by several coastal towns of North America's Pacific Northwest. Disputes over which is genuinely the tallest depends on factors such the number of logs used in construction or the affiliation of the carver. Competitions to make the tallest pole remain prevalent, although it is becoming more difficult to procure trees of sufficient height. The tallest poles include those in:
The thickest totem pole ever carved to date is in Duncan, British Columbia. Carved by Richard Hunt in 1988 in the Kwakwaka'wakw style, and measuring over in diameter, it represents Cedar Man transforming into his human form.
Notable collections of totem poles on display include these sites: