Toyota K engine


The Toyota K series is an inline-four engine that was produced from 1966 through 2007. It is a two-valve pushrod engine design, a rarity for the company. It was originally built from the Toyota Kamigo plant in Toyota City factory in Japan.
All K series are non-crossflow engines – the inlet and exhaust manifolds are on the same side. They have cast iron blocks and aluminium alloy heads, with a crankshaft supported by five main bearings. K series motors have both hydraulic tappet or hydraulic valve lifters, solid lifters and 1.5 ratio rockers with an adjustment thread for tappet clearance. 7k engines were released with only the hydraulic valve lifters from factory, whereas 4k and 5k engines were made with both hydraulic and solid lifters

K

The 8-valve OHV K was produced from 1966 through 1969. A similar K-B was produced from 1968 through 1969, the -B designates twin carburettors. Thus equipped, the engine produces at 6600 rpm. The Publica SL received this more powerful version.
Applications:
The eight-valve OHV 2K was produced from 1969 through 1988. The cylinder bore and stroke was.
Output in 1978 was at 5800 rpm, and at 3800 rpm. In 1983, New Zealand received a version with at 5800 rpm, while Europe received a version with at 5600 rpm, both with a maximum torque of at 4000 rpm.
Applications:
The eight-valve overhead valve 3K was produced from 1969 through 1977. Cylinder bore and stroke was.
The 1969 through 1975 3K-B was a twin-carburetor version. The California-spec 3K-C and 3K-H were other available versions.
;Applications:
;Specifications:
CodePSkWHPat rpmkgmNmlb-ftat rpmCompr. RatioComments
3K600038009.0:1----
3K9.0:1--
3K-B6600460010.0:1Twin carburettors, high octane----
3K-B6200400010.0:1----
3K-BR660046009.0:1As 3K-B but for regular octane----
3K-C580038009.0:1California emissions controls ----
3K-D6600420010.0:1High compression, single carburettor----
3K-H600042009.0:1High octane----
3K-H600038009.0:1----
3K-J580036009.0:1Japanese emission controls for commercial vehicles----
3K-HJ580036009.0:1Japanese emission controls for commercial vehicles ----
3K-U580036009.0:1Japanese emission controls ----
3K-R9000820013.0:1TRD Racing circuit engine----

4K

The 4K was produced from 1977 through 1989. Cylinder bore and stroke was. It was an 8-valve OHV engine.
In 1980, the 4K produced at 5250 rpm. From 1983 through 1984, output was at 5600 rpm and at 3600 rpm.
The 1981 and 1982 California-spec 4K-C produced at 5200 rpm and at 3600 rpm. Torque was up to at 3400 rpm for the fuel injected 1982 through 1984 4K-E. The Japan-spec 4K-U produced at 5600 rpm and at 3600 rpm in 1982. Available in hydraulic and solid lifter configurations
Applications:
The 5K was produced from 1983 through 1996. Typical output is at 5600 rpm. Bore and stroke is. It was available with either 4- or 5-speed manual transmissions. Like the smaller 4K model, it uses hydraulic lifters as well as solid lifters for the pushrod.
Applications:
The 7K was first introduced in 1983. Cylinder bore and stroke was. Output was at 4600 rpm and at 2800 rpm while the EFI version which can be found in Toyota Kijang KF80 produces at 4600 rpm and at 3200 rpm.
The Engine was available with a 5 speed manual & 4 speed automatic transmission. Available in both fuel injected and carburetted configurations, the 7K produces much more power and torque compared to the other K engines however it is a lot less 'rev happy' due to having such a large stroke.
7K-E is available in KR42 Townace SBV vans using a large G52 5 speed gearbox, or automatic.
Applications: