Transfer-matrix method (optics)


The transfer-matrix method is a method used in optics and acoustics to analyze the propagation of electromagnetic or acoustic waves through a stratified medium. This is for example relevant for the design of anti-reflective coatings and dielectric mirrors.
The reflection of light from a single interface between two media is described by the Fresnel equations. However, when there are multiple, such as in the figure, the reflections themselves are also partially transmitted and then partially reflected. Depending on the exact path length, these reflections can interfere destructively or constructively. The overall reflection of a layer structure is the sum of an infinite number of reflections.
The transfer-matrix method is based on the fact that, according to Maxwell's equations, there are simple continuity conditions for the electric field across boundaries from one medium to the next. If the field is known at the beginning of a layer, the field at the end of the layer can be derived from a simple matrix operation. A stack of layers can then be represented as a system matrix, which is the product of the individual layer matrices. The final step of the method involves converting the system matrix back into reflection and transmission coefficients.

Formalism for electromagnetic waves

Below is described how the transfer matrix is applied to electromagnetic waves of a given frequency propagating through a stack of layers at normal incidence. It can be generalized to deal with incidence at an angle, absorbing media, and media with magnetic properties. We assume that the stack layers are normal to the axis and that the field within one layer can be represented as the superposition of a left- and right-traveling wave with wave number,
Because it follows from Maxwell's equation that and must be continuous across a boundary, it is convenient to represent the field as the vector, where
Since there are two equations relating and to and, these two representations are equivalent. In the new representation, propagation over a distance into the positive direction is described by the unimodular matrix
and
Such a matrix can represent propagation through a layer if is the wave number in the medium and the thickness of the layer:
For a system with layers, each layer has a transfer matrix, where increases towards higher values. The system transfer matrix is then
Typically, one would like to know the reflectance and transmittance of the layer structure. If the layer stack starts at, then for negative, the field is described as
where is the amplitude of the incoming wave, the wave number in the left medium, and is the amplitude reflectance coefficient of the layer structure. On the other side of the layer structure, the field consists of a right-propagating transmitted field
where is the amplitude transmittance, is the wave number in the rightmost medium, and is the total thickness. If and, then we can solve
in terms of the matrix elements of the system matrix and obtain
and
The transmittance and reflectance are often of more practical use and are given by and, respectively.

Example

As an illustration, consider a single layer of glass with a refractive index n and thickness d suspended in air at a wave number k. In glass, the wave number is. The transfer matrix is
The amplitude reflection coefficient can be simplified to
This configuration effectively describes a Fabry–Pérot interferometer or etalon: for, the reflection vanishes.

Acoustic waves

It is possible to apply the transfer-matrix method to sound waves. Instead of the electric field E and its derivative F, the displacement u and the stress, where is the p-wave modulus, should be used.

Abeles matrix formalism

The Abeles matrix method is a computationally fast and easy way to calculate the specular reflectivity from a stratified interface, as a function of the perpendicular momentum transfer, Qz:
where θ is the angle of incidence/reflection of the incident radiation and λ is the wavelength of the radiation.
The measured reflectivity depends on the variation in the scattering length density
profile, ρ, perpendicular to the interface. Although the scattering length density profile
is normally a continuously varying function, the interfacial structure can often be well approximated
by a slab model in which layers of thickness, scattering length density and roughness are sandwiched between the super- and sub-phases. One then uses a refinement procedure to minimise the differences between the theoretical and measured reflectivity curves, by changing the parameters that describe each layer.
In this description the interface is split into n layers. Since the incident neutron beam
is refracted by each of the layers the wavevector, k, in layer n, is given by:
The Fresnel reflection coefficient between layer n and n+1 is then given by:
Since the interface between each layer is unlikely to be perfectly smooth the roughness/diffuseness of each interface modifies the Fresnel coefficient and is accounted for by an error function, as described by Nevot and Croce.
A phase factor, β, is introduced, which accounts for the thickness of each layer.
where.
A characteristic matrix, cn is then calculated for each layer.
The resultant matrix is defined as the product of these characteristic matrices
from which the reflectivity is calculated as: