Transient state


A system is said to be in a transient state when a process variable or variables have been changed and the system has not yet reached a steady state.The time taken for the circuit to change from one steady state to another steady state is called the transient time. Transient analysis KVL and KCL to circuits containing energy storage elements results in differential.
A transient process is a process in which process variables change over time.
Transient analysis L and to study circuits containing energy storage elements results in differential. study of transient processes.

Examples

Chemical Engineering

When a chemical reactor is being brought into operation, the concentrations, temperatures, species compositions, and reaction rates are changing with time until operation reaches its nominal process variables.

Electrical engineering

When a switch is flipped in an appropriate electrical circuit containing a capacitor or inductor, the component draws out the resulting change in voltage or current, causing the system to take a substantial amount of time to reach a new steady state.
We can define a transient by saying that when a quantity is at rest or in uniform motion and a change in time takes place, changing the existing state, a transient has taken place.
When a SCR is switched on we have the problem of transients occurring as a result of high values of current and voltage oscillating around the point before normal levels are obtained again. Filtering can prevent damage to SCR by means of LC filters, zener diodes, trans-zorps, and varistors.