Firepaste is an intumescent white paste that, when dry, is flame and heat resistant. It has a consistency and texture similar to clay when wet and dries into a gray ceramic material which resembles concrete. The impetus for firepaste came from a failed fire test with the Ursus Mark VII where the metal exoskeleton heated up, popped the air bags and left Hurtubise with numerous burns. Like Project Grizzly, Hurtubise has tested the material on himself. For a demonstration for the media and military in summer 2004, he made a thin mask of the material, put it over his face, and aimed a specialized blowtorch at thousands of degrees directly at the mask. The temperature was intentionally much hotter than the temperatures reached by the Space Shuttle on reentry. A thermometer located between his face and the mask measured no appreciable temperature change below the mask after nearly ten minutes, and the integrity of the material was not compromised.
Angel Light
According to Hurtubise, this device made walls, hands, stealth shielding, and other objects transparent. He claimed that beams from the device had the side-effects of damaging electronic devices and killing goldfish. After testing the device on his own hand, he claimed he could see his own blood vessels and muscle tissue as clearly as if the skin had been pulled back, but the beam caused numbness and he began to feel ill. He also claimed to be able to read the licence plate on a car in his garage from his workshop and see the road salt on it. There are no pictures or any sort of objective, verifiable evidence to support these claims made by Hurtubise.
Trojan armor
In early 2007, Hurtubise made public his new protective suit which was designed to be worn by soldiers. Calling it the "Trojan Ballistics Suit of Armor", Hurtubise described it as the "first ballistic, full exoskeleton body suit of armour". He claimed that the suit could withstand bullets fired from high powered weapons. Hurtubise published a demonstration video in which 9mm,.357 handgun rounds, and a 12 gauge shotgun round were fired at the suit's vest from short range; the apparently uncut video shows no marks at all on the ballistic clay underneath. The suit also features a knife holster and a helmet with two fans, one for intake and one for exhaust, to help cool the wearer. The suit has many features including a solar powered air system, recording device, compartments for emergency morphine and salt, and a knife and gun holster. He estimates that the cost of each suit to be roughly $2,000 if mass-produced. It has been called the "Halo suit", after the fictional MJOLNIR battle armor worn by the Master Chief character in the Xbox and PC video game series Halo. In early February 2010, after failing to receive any offers to buy the Trojan, Hurtubise, now bankrupt from the expense of creating the suit, was forced to put the prototype up for auction on eBay in the hopes that it would bring in enough money to sustain his family. The auction's reserve bid was not met. There was a raffle for the suit on the Mission Trojan website, whose goal is to raise money for further prototypes and testing of the Trojan Suit to demonstrate its abilities for military applications. The suit was won by Sara Markis of Florida who donated it back to Hurtubise for work on his next prototype.
