Tulip System-1


The Tulip system I was a 16-bit personal computer based on the Intel 8086 and made by Tulip Computers, formerly an import company for the Exidy Sorcerer, called CompuData Systems.
Its 6845-based video display controller could display 80×24 text in 8 different fonts for supporting different languages, including a font for 2×3 pseudo graphic symbols for displaying 160×72 pixel graphics in text mode. The video display generator could also display graphics with a 384×288 or 768×288 or 768×576 pixel resolution using its built-in NEC 7220 video display Coprocessor, which had hardware supported drawing functions, with a very advanced set of bit-block transfers, it could do line generating, arc, circle, ellipse, ellipse arc, filled arc, filled circle, filled ellipse, filled elliptical arc and many other varied commands.
Its memory could be upgraded in units of 128 KB up to 896 KB.
It included a SASI hard disk interface and was optionally delivered with a 5 MB or 10 MB hard disk.
The floppy disk size was 400 KB or 800kb.
It ran at 8 MHz, almost twice the speed of the IBM PC XT which was launched only a few months earlier in July 1983. It had the possibility to use an 8087 coprocessor for math, which increased the speed to > 200 kflops, which was near mainframe data at that time.
After initially using CP/M-86 it quickly switched to using generic MS-DOS 2.00. There was a rudimentary IBM-BIOS-emulator, which allowed the user to use WordStar and a few other IBM-PC software, but Compudata B.V. shipped WordStar and some other software as adopted software for this computer.
There was a programming support by Compudata B.V. with MS-Basic, MS-Pascal and MS-Fortran.
On a private base, TeX and Turbo Pascal were ported to the Tulip System 1.