Turbomeca Palouste


The Turbomeca Palouste is a French gas turbine engine, first run in 1952. Designed purely as a compressed air generator, the Palouste was mainly used as a ground-based aircraft engine starter unit. Other uses included rotor tip propulsion for helicopters.

Design and development

Designed and built by Turbomeca, the Palouste was also built under license in Britain by Blackburn and Rolls-Royce. Originally conceived as an aircraft ground support equipment starter gas generator, it was used also as propulsion for the Sud-Ouest Djinn and other tip-jet powered helicopters.
The Palouste was a very simple unit, its primary purpose being to supply a high flow rate of compressed air to start larger jet engines such as the Rolls-Royce Spey as installed in the Blackburn Buccaneer. Air from the centrifugal compressor was divided between external supply and its own combustion chamber.
pod is in front.
Several British naval aircraft were adapted to carry a Palouste in a wing-mounted air starter pod installation to facilitate engine starting when away from base.
A novel use of a surplus Palouste engine was its installation in a custom-built motorcycle known as the Boost Palouste. In 1986 this motorcycle broke an official ACU 1/4 mile speed record at ). The builder modified the engine to include a primitive afterburner device and noted that pitch changes which occurred during braking and acceleration caused gyroscopic precession handling effects due to the rotating mass of the engine.

Variants

;Palouste IV:The gas generator used to power the Sud-Ouest S.O.1221 Djinn and other tip-jet helicopters.
;Palouste IVB:
;Palouste IVC:
;Palouste IVD:
;Palouste IVE:
;Palouste IVF:
;Palouste 502: Blackburn / Bristol Siddeley / Rolls-Royce production for air-starter units.
;Autan :A development of the Palouste delivering a higher mass flow of compressed air.
;Autan 2: 1 x axial + 1 x centrifugal compressor stages

Applications