US 31–Pentwater River Bridge


The US 31–Pentwater River Bridge is a three-span steel bridge that carries Oceana Drive over the Pentwater River in northern Hart, Michigan. It is listed on the National Register of Historic Places.

History

Prior to the construction of the current span, US 31 spanned the river in Hart on a bridge that had become a significant bottleneck by the early 1950s. In 1954, a replacement structure was designed by the Michigan State Highway Department. The bridge was designated as a Federal Aid project and the contract for construction was awarded to Gene Fewell. The bridge was completed the next year for $266,564.
Since construction, the bridge has been altered little and has undergone repairs only for maintenance reasons. In 1988, the bridge was rehabilitated by replacing the pins and hangers of the non-redundant suspended spans. The bridge was listed on the National Register of Historic Places on December 20, 1999, and the Michigan Department of Transportation placed it on their list of historic bridges.

Design

The bridge has three spans and a total length of. The two anchor spans are long and cantilever over the piers to support the center span, of which is suspended. The deck is wide and the total width of the bridge is. The bridge is essentially two separate bridges, each with its own structure, separated by a divider strip and connected by a joint along the bridge's length. The bridge has two lanes in each direction and the sidewalks are wide.
The steel girder design of the US 31–Pentwater River Bridge was widely used by State Highway Department in the 1930s and 1940s. The department used similar designs as early as 1905, but it was not until about 1930 that steel manufacturing techniques could produce a span greater than.