Uranium hydride bomb


The uranium hydride bomb was a variant design of the atomic bomb first suggested by Robert Oppenheimer in 1939 and advocated and tested by Edward Teller. It used deuterium, an isotope of hydrogen, as a neutron moderator in a uranium-deuterium ceramic compact. Unlike all other fission-based weapon types, the concept relies on a chain reaction of slow nuclear fission. Bomb efficiency was adversely affected by the cooling of neutrons since the latter delays the reaction, as delineated by Rob Serber in his 1992 extension of the original Los Alamos Primer.
The term hydride for this type of weapons has been subject to misunderstandings in the open literature. While the "hydride" might erroneously imply that the isotope used is hydrogen, only deuterium has been used for the bomb pits. The nomenclature is used in a manner similar to the term "hydrogen bomb", where the latter employs deuterium and occasionally tritium.
Two uranium deuteride fueled bombs are known to have been tested, the Ruth and Ray test shots during Operation Upshot–Knothole. Both tests produced a yield comparable to 200 tons of TNT each, and were considered to be fizzles. All other nuclear weapons programs have relied on fast neutrons in their weapons designs.

Theory

During early phases of Manhattan Project, in 1943, uranium deuteride was investigated as a promising bomb material; it was abandoned by early 1944 as it turned out such design would be inefficient. The "autocatalytic" design that emerged from this early research was "Elmer", the discontinued radial-implosion Mark 2 weapon. It made use of uranium deuteride particles coated with paraffin and boron-10 carbide wax distributed uniformly throughout the solid core. A composite lead and B4C tamper was envisioned, with about 10.5 kg of active material in one version, and a BeO tamper with 8.45 kg of active material in another.
The heavy hydrogen in uranium deuteride or plutonium deuteride moderates the neutrons, thereby increasing the nuclear cross section for neutron absorption. The result should have been a lower required critical mass, concordantly reducing the amount of pure 235U or 239Pu needed for a weapon explosion. At the same time, due to the moderating effect of deuterium, the compression requirements are relaxed somewhat, which would permit assembly of additional fissile material in the core, as well as a radial-implosion assembly, which was much simpler and compact than the one destined for the MK 3. In reality the result was that the slower neutrons delayed the reaction time too much by reducing the number of fission generations accomplished; especially as the core expanded to reach its snowplow region, more neutrons could escape from the turbulent surface of the core, and before enough energy could be produced. In all, neutron moderation sharply reduced the efficiency of the weapon before the inertial confinement failed. It was realised that the end result would be a fizzle instead of full-scale detonation of the device. The predicted energy yield was around, if the core operated as originally expected; the first rough estimate for the behaviour of the "hydride" bomb appeared in 1944, when James Conant forecasted that 1 kt of energy would be obtained from about 9 kg of UD3.
Post war, Los Alamos physicists continued research on the subject at low priority; while a Monte-Carlo simulation in December 1949 showed that the core could in principle work and result in a weapon considerably smaller than the MK 5, strong skepticism arose as the inherently low efficiency of the fuel would not improve even remotely as theoretically envisioned when a hollow core and boosting were incorporated, and a proposed test of such a core in an MK 4 high-explosive assembly was ultimately stricken from the preliminary shot schedule of operation Greenhouse.
showing the MK 2 "Elmer" and the MK 8 "Elsie" weapons, depicting the MK 2 as clumsy and unattractive.

UCRL tests

Skepticism from Los Alamos notwithstanding, Edward Teller remained interested in the concept, and he and Ernest Lawrence experimented with such devices in the early 1950s at the UCRL,. Optimism in the new lab prompted UCRL to even propose a class of such "small weapons" making use of the material, dubbing it as the "Geode". The "Geode"-type devices would be compact, linear implosion, gas-boosted fission weapons using hollow spheroidal metallic uranium, or partially moderated cores, where a metallic uranium or plutonium shell was lined internally with UD3 producing yields of the order of 10 kt. Applications for this class of devices would be tactical nuclear weapons, as well as primaries for compact thermonuclear systems. The "Geodes" were essentially forerunners of the "Swan" and its derivatives.
Two test devices were fielded in 1953 as part of operation Upshot–Knothole. The principal aim of the University of California Radiation Laboratory designs was a preliminary nucleonics investigation for a spherical deuterated polyethylene charge containing uranium deuteride as a candidate thermonuclear fuel for the "Radiator", an early incarnation of the "Morgenstern". It was hoped that deuterium would fuse in the secondary's core if compressed appropriately through radiation implosion. The fuel was selected so that UCRL's thermonuclear program would not compete with LASL's on scarce materials at the time, specifically lithium. If successful, the devices could also lead to a compact primary containing minimal amount of fissile material, and powerful enough to ignite Ramrod the other Mark 22 nuclear bomb prototype designed by UCRL at the time. For a hydride-type primary, the degree of compression would not make deuterium to fuse, thus the design would be essentially a pure fission weapon, not a boosted one. The devices themselves as tested in Upshot-Knothole were experimental systems, not weapon prototypes, and were not designed to be used as weapons, or thermonuclear primaries. The cores consisted of a mix of uranium deuteride, powder-compacted with deuterated polyethylene. No boron was used. The cores tested in Upshot-Knothole used different "mix" of uranium moderated by deuterium. The predicted yield was 1.5 to 3 kt for Ruth and 0.5-1 kt for Ray. The tests produced yields of about 200 tons of TNT each; both tests were considered to be fizzles.
Ruth, which used deuterium and enriched uranium in a solid spherical pit with a natural uranium tamper, was the first device almost-entirely designed at Livermore; it was fired on March 31, 1953 at 05:00 local time at Mercury, Nevada. The explosive device, "Hydride I", used a MK-6 HE assembly made of Composition B and Baratol explosive lenses, and an XMC-305 betatron was provided for initiation through photofission, weighed and was in diameter and long. The nuclear system weighed. Defying the 1.5–3 kt predictions, its actual yield was only 200 tons. Wally Decker, a young Laboratory engineer, characterized the sound the shot made as "pop." The device failed to "automatically declassify" its test site, where the lower of the testing tower remained intact, the middle third scattered across the test area and only the upper third vaporized.
The second device, tested in the Ray event, used deuterium and a different concentration of enriched uranium in its solid spherical pit. The device was called "Hydride II", and it also used a MK-6 HE assembly; it was likewise initiated by an XMC-305 betatron fired at known time. Being a sister device to "Hydride I", the "Hydride II" device only had a different pit "fuel" mix, and shared the same dimensions and weight with the Ruth test device. It was fired in a cab, atop a tower on April 11, 1953. Although shot Ray leveled its tower, the yield was a meager 220 tons; while it did better than Ruth, the yield was still about a tenth of the predicted 0.5–1 kt value.