Vltava


The Vltava is the longest river within the Czech Republic, running southeast along the Bohemian Forest and then north across Bohemia, through Český Krumlov, České Budějovice and Prague, and finally merging with the Elbe at Mělník. It is commonly referred to as the "Czech national river".
Both the Czech name Vltava and the German name Moldau are believed to originate from the old Germanic words wilt ahwa. In the Annales Fuldenses it is called Fuldaha; from 1113 AD it is attested as Wultha. In the Chronica Boemorum it is attested for the first time in its Bohemian form, Wlitaua.

Course

The Vltava river is long and drains an area in size, over half of Bohemia and about a third of the Czech Republic's entire territory. As it runs through Prague, the river is crossed by 18 bridges and covers within the city. The water from the river was used for drinking until 1912, when the Vinohrady Water Tower ceased pumping operations. It is, however, the source of drinking water in case of failures of or repairs to the water supply from the Želivka and Kárané sources. The Podolí water processing plant is on standby for such cases with the long section of the river upstream of the Podolí plant under the stricter, second degree of pollution prevention regulations.
The height difference from source to mouth is about and the largest stream at the source is named Černý Potok or Teplá Vltava. The Vltava itself originates by a confluence of two streams, the Warm Vltava, which is longer, and the Cold Vltava, sourcing in Bavaria. Along its course, Vltava receives many tributaries, the biggest being Otava and Berounka from the left and Lužnice and Sázava from the right side.

Navigation

Between the confluence with the Elbe at Mělník and Prague, the river is navigable by vessels of up to displacement. Most of the river upstream of Prague as far as České Budějovice is currently navigable by craft of up to displacement, but such vessels cannot pass the dams at Orlík and Slapy, and are also restricted by a low bridge at Týn nad Vltavou. Work is planned to complete boat lifts, planned for but never completed, at the two dams, and to rebuild the bridge, in order for them to navigate throughout. Much smaller craft, of up to displacement and under beam and air draft, can avoid these obstacles.
Upstream of České Budějovice, the river's section around Český Krumlov is a very popular destination for water tourism.

Dams

Nine hydroelectric dams have been built on the Vltava south of Prague to regulate the water flow and generate hydroelectric power, starting in the 1950s. Beginning at the headwaters, these are: Lipno, Lipno II, Hněvkovice, Kořensko, Orlík, Kamýk, Slapy, Štěchovice and Vrané. The Orlík dam supports the largest reservoir on the Vltava by volume, while the Lipno dam retains the largest reservoir by area. The Štěchovice Reservoir is built over the site of the St John's Rapids.
The river also features numerous weirs that help mitigate its flow from in elevation at its source near the German border to at its mouth in Mělník.

Floods

The Vltava basin has flooded multiple times throughout recorded history. Markers have been created along the banks denoting the water line for notable floods in 1784, 1845, 1890, 1940, and the highest of all in 2002.
In August of that year, the basin was heavily affected by the 2002 European floods when the flooded river killed several people and caused massive damage and disruption along its length, including in Prague. It left the oldest bridge in Prague, Charles Bridge, seriously weakened, requiring years of work to repair.
Prague was again flooded in 2013. Many locations within the Vltava and Elbe basins were left under water, including the Prague Zoo, but metal barriers were erected along the banks of the Vltava to help protect the historic city centre.