W.H. Dorman & Co


W.H. Dorman & Co was a company formed by William Henry Dorman in 1870 making cutting tools for the footwear industry. It diversified into other tools including grinders, and in 1903 into internal combustion engines. This was to be its main product up to the point where it was taken over by the English Electric Company in 1961, though the Dorman name continued as a diesel engine trademark until 1995. William Henry Dorman retired in 1911, and died in 1926.

Origins

The early origins of W.H. Dorman & Co were documented in a centenary booklet, marking the history of Dorman from 1870 to 1970. These were handed out to all employees and visitors to Dorman Diesels. Extracts from the centenary booklet have been reproduced on the Dorman Association website.
When the company was first formed it was to make sole and heel cutting knives for the local footwear industry. Within a few years this diversified into a wide range of machinery for industry, as well as the first refrigeration plant for the in London. Around 1897 the part of the business devoted to the footwear industry was sold off to the British United Shoe Machinery Co, and the business directed its efforts more towards printing, grinding, and knitwear machines. However, by 1903 they made their first internal combustion petrol engines and petrol-paraffin engines, and gradually engine manufacture was to become their main business. However, William Henry Dorman was a prolific inventor and between 1894 and 1914 there are 72 patents to his name, many related to the mechanisation of the manufacture of footwear, but also on diverse topics such as the trouser press, four-wheel-drive motor cars, and a method for separating cream from milk. Apart from the engines that were later to dominate the business, a great many other products were made, many of which were equipment for manufacturing industry.
Factory records of the engine production exist from 1913, starting with engine number 701, however information on the engines produced from 1903 to 1912 is missing. The Dorman Association shows that from 1913 the JJ and JO engines were available in either 2-cylinder or 4-cylinder form, each with the same 110 mm bore and 140 mm stroke and with 8 bhp per cylinder. It is known that the 4-cylinder Dorman engine was fitted into the Pagefield trucks made by Walker Brothers of Wigan in 1913 to a War Department specification. In November 1913 Dorman were advertising that their 4-cylinder engine was awarded a "Special Certificate in the War Office Subsidy Trials". This same advert lists a 2-cylinder water-cooled motor with 80 mm bore and 108 mm stroke, and other adverts from March and April 1914 show other engines were available. A Dorman engine powered the Caledon lorries from 1915-1919.
The Dorman Engineering Co of Northampton is sometimes confused with W.H. Dorman & Co. The principle partner there was Thomas Phipps Dorman, and the main product was the Dorman sewing machine, though they started manufacturing engines and made the Whirlwind motorised bicycle for a few years before failing in 1903. This failure coincides with the start of engine manufacture at W.H. Dorman, but no commercial or familial link has as yet been identified between the two companies.

First World War

The Dorman 2-cylinder and 4-cylinder engines were the only engines selected for the internal combustion 'rail tractors' used on the War Department Light Railways, these being made by Motor Rail with 2-speed gearboxes, and the 40 hp 4JO was used in the petrol-electric locomotives made by Dick, Kerr & Co. and British Westinghouse. After the war many of these rail tractors were overhauled and sold in the UK, and as a result many survive and a few of them still have the original Dorman engine.
Dorman also made engines for marine use, and the 1917 'Red Book' lists a range of marine petrol engines that could be run on paraffin by specifying the addition of a "Haddon Patent Paraffin Vaporiser" at extra cost. The listed engines were:
Dorman continued as engine supplier to Motor Rail for peacetime variants of the rail tractors, which became known as Simplex locomotives. Initially these used the same 2JO and 4JO petrol engines, though later they adopted Dorman-Ricardo diesel engines.
1919 saw an expansion in the range of engines, and diversification in the applications, including the Ruston & Hornsby car, which was produced until the mid-1920s. The Vulcan car of the 1920s also was available with a Dorman engine, and several other cars of very limited production used Dorman engines in the 1920s. The Dorman 4JO engines was also used in the new model 1922 40 hp Clayton & Shuttleworth 'chain-rail' crawler tractors. Their previous model, which had been made throughout the war, had a 35 hp rating, though it is not clear if these were also Dorman-engined. These crawler tractors were used for towing Handley-Page bombers, and later used by the RNLI.
In 1930 Dorman introduced their first diesel engine, the RB, and from then on all new engines up to World War 2 were diesels. At the time of its introduction Dorman listed 19 different petrol engines from 8.5 to 100 bhp. This new twin-cylinder 4-stroke diesel used an Acro air-cell combustion head. The bore and stroke were 110mm and 180mm, giving a capacity of 3420cc, and it used Bosch 'solid' fuel injection.
From 1932 the diesel engines were changed to use Ricardo style heads, and referred to as Dorman-Ricardo engines. Large numbers of these engines were used in early diesel trucks, either fitted to new chassis, or for the conversion of existing petrol engines trucks. Production of Dorman-Ricardo marine and transport engines, mainly 4- or 6-cylinder units was to continue up to the war, at about which time Dorman introduced direct injection engines. Dorman started work on a V8 engine in 1938.
Thornycroft were one of the truck manufacturers using Dorman engines in the 1930s, with the 4DS fitted into the Bullfinch 4-ton 4-wheeler, and the larger 4JUR specified for the Steadfast 4-ton truck.

Second World War

Dorman continued production through the war, with most engines moving to direct injection, and in 1942 were listed as producing 8 different marine diesel engines with 2,3,4 or 6 cylinders, and a range of 5 road transport engines of 4 or 6 cylinders.

Post-War

By 1949 Dorman was no longer making engines for road transport, and their range focussed on marine and industrial engines. The marine engines were by this time all direct injection, with the exception of the V8 VRM engine which had been further developed during the war, but still used Ricardo heads and was rated at 100 hp at 2300 rpm.
While almost all engine production was diesel engines, Dorman did make a petrol engine – the 1AB 800 cc 4-stroke single that was used in the Aveling-Barford calfdozer. There was also a twin-cylinder version, the 2AB. Production was from the mid-1940s into the 1950s.
After the war, businesses favoured who exported, and Dorman was very successful. By 1952, 85% of its production was either directly or indirectly exported.
In 1953 the new 'L' series engines were launched with the LA. These were a new design of engine dating back to 1946, with maximum interchangeability of parts. The largest single order for these engines was from Canada for hundreds of engines to drive radar stations situated along the 69th parallel. In 1957 the 'Q' series engines were launched, with an in-line 6-cylinder and V8 and V12 engines. Surviving engines are often found in emergency generator rooms, and this appears to have been one of the main markets for these engines, though they were also to be found in fishing boats.
In 1959, Dorman merged with the neighbouring factory of W.G. Bagnall, and, with full order books, in 1961 W.H. Dorman became the Dorman Engines Division of English Electric Ltd. Dorman diesels continued to be produced, and in 1964 Dorman added the 'DA' range of engines alongside the existing 'Q' and 'L' series engines. The 'DA' had applications for snow-blowers, grain-dryers and compressors. Under English Electric Ltd some of the smaller Ruston diesel designs came under the Dorman Engine Division, and in 1969 36 different diesel engines were listed from 5.5 bhp to 910 bhp. These were subdivided into the following application areas:
Dorman became the wholly owned Dorman Diesels Ltd in c. 1970, however markets tended to decline into the decade. By the 1980s Dorman was struggling, and in 1987 its then owner GEC sold the business to Broadcrown Ltd. There were various attempts at diversification, with some marine units being sold, but the main output was still generators. In 1994 the business was sold to Perkins Engines, and 1995 finally saw the last range renamed as Perkins engines, and the Dorman name was dropped.
In 2010 the rights to the older engines was acquired from Perkins Engines Company Ltd by Lincoln Diesels Ltd along with Perkins' entire stockholding of non SE series spare parts. Lincoln Diesels Ltd has revived the Dorman Diesels name and now supplies new parts for the older engines and complete engines on an exchange basis from their works in Lincoln.