WD Austerity 2-8-0


The War Department "Austerity" 2-8-0 is a type of heavy freight steam locomotive that was introduced in 1943 for war service. A total of 935 were built, making this one of the most-produced classes of British steam locomotive.

Overview

The Austerity 2-8-0 was based on the LMS Class 8F, which until that point had been the government's standard design. Various modifications were made to the 8F design by R.A. Riddles in order to prioritise low cost over design life. These included a boiler of simpler construction which was parallel rather than tapered and a round-topped firebox rather than a Belpaire firebox. The firebox was made of steel rather than the rarer and more expensive copper.
The North British Locomotive Company of Glasgow built 545 and the Vulcan Foundry of Newton-le-Willows, Lancashire, built 390. North British also built a larger 2-10-0 version.
WD numbersBuilderWorks Nos.QuantityDate
800–879NBL 24891–970801944
7000–49NBL 24971–25020501943
7050–7149VF4866–49651001943
7150–7262NBL 25021–1701131943
7263–7299NBL 25021–170371944
7300–7416NBL 25171–3201171943
7417–49NBL 25171–320331944
7450–64VF4966–80151943
7465–7509VF4981–5025451944
8510–30NBL 25321–70211944
8531–59NBL 25321–70291945
8560–8611NBL 25371–435521944
8612–8624NBL 25371–435131945
8625–8718VF5026–5119941944
9177–9243VF5120–86671944
9244–9312VF5187–5255691945

WD nos. 800–879 were ordered as LMS Class 8F. No. 9312, the last one built, was named Vulcan when new. NBL builder's plates were not all in correct sequence, and were mixed up between the two works as well as between batches. All locomotives had their WD numbers increased by 70000 prior to shipping to mainland Europe; those completed after 5 September 1944 carried their 70000 series numbers from new. All but three saw service with the British Army in mainland Europe after D-Day.

Post-war disposal

After the end of the conflict, the War Department disposed of 930 locomotives.
After the Second World War, 200 were sold to the LNER, who classified them as "Class O7" and numbered them 3000–3199. In 1948, 533 more were purchased by the British Transport Commission.
With the formation of British Railways, the 733 locomotives were renumbered into the 90000–90732 series. Only one of these, No. 90732, was named, becoming Vulcan after the Vulcan Foundry where many of the locomotives were built.
In 1946, 12 were exported to the British colony of Hong Kong to work the Kowloon-Canton Railway. Six were scrapped in 1956, but the final two survived until September 1962.
The other 184 locomotives remained in mainland Europe, mostly working in and around the Netherlands for Nederlandse Spoorwegen.
Finally, one went to the USATC in an exchange for an USATC S160 Class locomotive in the Postwar exchange of WD and USATC locomotives.

Postwar WD service

Two locomotives continued to be held in WD stock, seeing service on the Longmoor Military Railway in Hampshire, along with two of the WD Austerity 2-10-0s and other smaller locomotives. In the WD 1957 renumbering scheme, they were renumbered 400/1. Details were as follows:
WD No.WD 1957 No.NameBuilderWorks No.Date builtNotes
77337400Sir Guy WilliamsNorth British 252051943Name previously on 78672
79250401Major General McMullenVulcan Foundry51931945

Accidents and incidents

One WD 2-8-0 has survived. Vulcan Foundry works No. 5200 was repatriated from Sweden to the Keighley and Worth Valley Railway. It was SJ Class G11 number 1931. It was overhauled to its original condition, finished in 2007, which involved building a new cab and tender, become BR "No. 90733". After test runs, 90733 ran its first passenger train on Monday 23 July 2007.

Gallery