Wolf Ammunition


WOLF Performance Ammunition is a trademark associated with Sporting Supplies International, a corporation in the United States. It was founded in 2005. The ammunition was mostly manufactured by Tula Cartridge Plant in Tula, Tula District, Russia from 2005 to 2009. Some.22-caliber rimfire ammunition is made by SK Jagd und Sportmunitions Gmbh of Schönebeck, Salzlandkreis, Saxony-Anhalt, Germany.

Products

WOLF Performance Ammunition has several product lines which include:
Unlike some suppliers of such bargain-price ammo, WOLF uses newly manufactured rounds with non-corrosive Berdan- and Boxer-type primers. Russia is the world's largest source of 7.62×39mm ammunition, which is used by the Russian AK-47 and SKS family of rifles, as well as the Ruger Mini-30.

Current events

In 2005/2006, there was a shortage of 7.62×39mm ammunition in the United States. This had the effect of causing prices to almost double in some cases and WOLF's ammo to nearly disappear from the U.S. market in late 2006–early 2007. The ammunition shortage was due to Russian production lines struggling to fill a massive order placed by Venezuela, who had just adopted the AK-103 series of rifles, and by the United States to supply the fledgling Afghan Army. Even so, Wolf's 7.62×39mm is available in standard full-metal-jacket configuration, as well as hollow-point and soft-point bullet loads suitable for hunting.
In 2007/2008, supplies of Wolf steel-cased.308 ammunition became increasingly rare, and major distributors were completely sold out. This, along with diminishing supplies of military surplus 7.62×51mm NATO, had driven.308 Winchester prices to an all-time high. This shortage is exacerbated by the strain of filling the Afghan Army order. As Wolf catches up with demand, new supplies will become available in the United States.
Since 2009 The Tula Cartridge Plant and Ulyanovsk Machinery Plant no longer manufacture cartridges for Wolf due to legal disputes. Wolf now uses new European suppliers.
In 2010/2011, Wolf discontinued the use of the red sealant used around the primer and case neck intended to keep moisture out and prolong shelf life. They received too many complaints from end users of a buildup from the red sealant on their firearms; thus, all new ammo produced from both plants will no longer have any red sealant.

Potential Problems with Wolf Ammunition

Lacquer coating

Wolf never imported nor manufactured ammunition with a lacquer coating on the cartridge casing. It has always been an acrylic-polymer coating, first a clear one, and in the last decade mostly a more "frosted" coating. People often incorrectly referred to the clear coating as "lacquer" and claimed it "melted" in the chamber of heated firearms, but it was obviously not lacquer, and numerous articles and videos online have shown that even a blowtorch will not melt the coating or even soften it, disproving the myth of "melted lacquer".
Tests have shown that steel-cased Wolf cases do not obturate sufficiently to form a good gas seal against the chamber when compared to brass-cased ammunition. As a result, when Wolf cartridges are fired, some of the combustion by-products are deposited between the case and the chamber, causing a buildup of carbon that is well in excess of normal. Firing a brass case after using Wolf ammunition without cleaning the gun first can result in the brass case being "glued" into the chamber by the carbon buildup. This issue has nothing to do with the lacquer coating vaporising or melting, as has mistakenly been suggested. The problem is one of carbon deposition, which creates the same end result. It is important to emphasise that Wolf ammunition is perfectly safe to use because it conforms to all SAAMI standards. However, it is recommended that firearms be thoroughly cleaned after using Wolf ammunition due to the increased rate of carbon buildup within the chamber. As mentioned in the previous paragraph, the looser chamber dimensions of Soviet-designed weapons allow for more room during firing and extraction. Soviet or East Bloc weapons do not experience these problems.
Note: all ammunition currently manufactured by Wolf has polymer-coated or brass cartridge cases, and any obturation problems have been radically reduced.

Steel-jacketed bullets

In addition to using a steel casing, certain types of Wolf rifle cartridges use steel-jacketed bullets, which are often copper-plated and cosmetically similar to standard copper-jacketed bullets. The copper exterior of the bullet is approximately.005 inch thick, with an underlying steel jacket of about 1/32 inch thick. This type of ammunition is labeled "bimetal".
Indoor shooting ranges, which often use backstops constructed of steel, have accordingly widely prohibited steel-jacketed and bimetal ammunition to prevent shooters from damaging their backstops.