5 ft 6 in gauge railway
, a broad gauge, is the track gauge used in India, Pakistan, western Bangladesh, Sri Lanka, Argentina, Chile, and on BART in the San Francisco Bay Area.
In North America, it is called Provincial, Portland, or Texas gauge. In Argentina, it is known as "trocha ancha". In the Indian Subcontinent it is simply known as "broad gauge". Elsewhere it is known as Indian gauge. It is the widest gauge in regular passenger use anywhere in the world.
Asia
India
In India, the initial freight railway lines were built using standard gauge. In the 1850s, the Great Indian Peninsula Railway adopted the gauge of for the first passenger railway in India between Bori Bunder and Thane. This was then adopted as the standard for the nationwide network.Indian Railways today predominantly operates on broad gauge with more than 120,000 km of tracks. Most of the metre gauge and narrow gauge railways have been converted to broad gauge. Small stretches of the network that remain on metre and narrow gauges are also being converted to broad gauge. Rapid transit lines, are mostly on standard gauge, although some initial lines use broad gauge.
Bangladesh
Bangladesh Railways uses a mix of broad gauge and metre gauge. The broad gauge network is primarily located to the west of the Jamuna River, while the metre gauge network is primarily located to its east. The Jamuna Bridge is a mixed-use bridge that contains a dual gauge connection across the river linking both networks.Nepal
In Nepal, all services currently operate on broad gauge only.Pakistan
In Pakistan, all services currently operate on broad gauge only.Sri Lanka
In Sri Lanka, all services currently operate on broad gauge only.Europe
United Kingdom
The broad gauge was actually first used in Scotland for two short, isolated lines, the Dundee and Arbroath Railway and the Arbroath and Forfar Railway. Both the lines were subsequently converted to standard gauge.Spain and Portugal
The Iberian-gauge railways, that service much of Spain and Portugal, have a track gauge of, just different from. Used rolling stock from Iberia has been employed on broad-gauge lines in Argentina and Chile.North America
Canada
Canada became the first British colony, in the 1850s, to use broad gauge. It was known as the "Provincial gauge" in Canada.The earliest railways in Canada, including the 1836 Champlain and St. Lawrence and 1847 Montreal and Lachine Railway however, were built to standard gauge.
The Grand Trunk Railway which operated in several Canadian provinces and American states used it, but was changed to standard gauge in 1873. The Grand Trunk Railway operated from headquarters in Montreal, Quebec, although corporate headquarters were in London, England. The St. Lawrence and Atlantic Railroad which operated in Quebec, Vermont, New Hampshire and Maine also used it but was converted in 1873.
There is a longstanding rumour that the Provincial gauge was selected specifically to create a break-of-gauge with US railways, the War of 1812 still being a fresh memory. However, there is little supporting evidence for this, and this story appears to be traced to a single claim from the late 1800s.
United States
The Bay Area Rapid Transit system is the only operating railroad in the United States to use broad gauge, with of double tracked routes. The original engineers for the system had background in aerospace and intended to make a state-of-the-art system for other municipalities to emulate. The use of broad gauge rails was one of many unconventional design elements included in its design which, in addition to its unusual gauge, also uses flat-edge rail, rather than typical rail that angles slightly inward. This has complicated maintenance of the system, as it requires custom wheelsets, brake systems, and track maintenance vehicles.The New Orleans, Opelousas and Great Western Railroad used broad gauge until 1872, and the Texas and New Orleans Railroad used broad gauge, until 1876. The Grand Trunk Railway predecessor St. Lawrence and Atlantic Railroad which operated in Quebec, Vermont, New Hampshire and Maine also used broad gauge but was converted in 1873. Several Maine railroads connected to the Grand Trunk Railway shared its "Portland Gauge". The Androscoggin and Kennebec Railroad and the Buckfield Branch Railroad were later consolidated as the Maine Central Railroad which converted to standard gauge in 1871. The only electric streetcar system in the U.S. to use this gauge was that of Fairfield, Maine.
John A. Poor's chief engineer Alvin C. Morton compiled the following advantages of "Portland Gauge" for Maine railways in 1847:
- Frost heaves produce an uneven running surface causing an irregular rocking motion as trains moved past. A wider wheelbase offered a steadier ride with less wear on the machinery and roadbed.
- Wider cars offered more room for passengers and cargo. Train length would be reduced for cars carrying the same amount of cargo. Shorter trains would lessen the effects of side winds, and permit more efficient application of power.
- Wide gauge locomotives offered more room to place reciprocating machinery inside, rather than outside the driving wheels. Reciprocating machinery was a source of vibration before mechanical engineering encompassed a good understanding of dynamics; and keeping such vibration close to the center of mass reduced the angular momentum causing rocking.
- Wider fireboxes and boilers allowed more powerful locomotives. The alternative of longer boilers held the disadvantage of poor firebox draft through the increased frictional resistance of longer boiler tubes.
- More powerful locomotives carrying fewer, larger cars would have reduced manpower requirement for engine crews and shop personnel.
- For locomotives of equal power, fuel consumption increased as gauge decreased, especially in colder outside temperatures.
- More powerful wide gauge locomotives would be more capable for plowing snow; and thereby provide more reliable winter service.
- Several gauges were in widespread use, and none had yet come into clear dominance.
- Freight transfer was preferable to exchange of cars between railways because unowned cars were abused on foreign railways.
- The Grand Trunk Railway system feeding the seaport of Portland, Maine offered little need for gauge transfer prior to loading on export shipping.
- Potential advantages of freight transfer to the standard gauge railroad from Portland to Boston seemed insignificant as long as competitive rates were available for transport on steamships between the two ports.
- The majority of Canadian freight anticipated to be carried over rail lines to Portland was heavy and bulky in comparison to its value, and must be transported cheaply in large quantities to maintain profitability for producers and transporters.
South America