Andover is a planned New Jersey Transit passenger railroad station in Andover Township, in Sussex County, New Jersey, United States, providing service on its Lackawanna Cut-Off line. The line remains under construction. The station will be built at a site on Andover's Roseville Road, about 1.1 miles from U.S. Route 206 and about 0.9 miles from County Route 517. On the rail line, it will be located about 7.3 miles west of Port Morris Junction. Anticipated construction at the site includes a station and platform between the track and Roseville Road with 65 parking spaces initially, with room to expand to 125 spaces. Preparation to restore trackage between Port Morris and Andover was originally to begin in 2010 but was delayed until early 2011 due to a dispute over the exact location of the Andover Station area. Another delay was caused while environmental permits were sought. In August 2017, an agreement with a local landowner appeared to have cleared the way for the necessary environmental permits. At the time, service was projected to start in 2020, though in March 2020 it was pushed back to 2025. The Andover station will be the terminus of the line, but plans exist for extending the Lackawanna Cut-Off line west of Andover.
New Jersey Transit's Board of Directors authorized consultant work for conceptual design, completion of the environmental assessment and preparation of the documentation required by the Federal Transit Administration for new transit lines to open service to northwestern New Jersey and northeastern Pennsylvania. The State of New Jersey completed the purchase of the Lackawanna Cut-Off right-of-way and property within the state in May 2001. In May 2008, the North Jersey Transportation Planning Authority approved funding to rebuild the first segment of track for restored service along the Cut-Off route between Andover and Port Morris Junction. After review of the submitted environmental assessment, the Federal Transit Administration issued a Finding of No Significant Impact for the first phase of the project to Andover on September 12, 2008. Preparation to restore trackage between Port Morris and Andover was originally slated to begin in 2010 but was delayed until early 2011 due to environmental concerns and questions over the exact location of the Andover Station area. In September 2011, the first new track was laid at Port Morris; three months later, Norfolk Southern delivered 7.5 miles of continuously welded rail to Port Morris, enough to re-lay a single track to Andover. As of 2017, much of the right-of-way between Port Morris and Lake Lackawanna had been cleared of trees and debris. The section between Lake Lackawanna and Andover is still awaiting approval of environmental permits for roadbed clearing. A total of 4.25 miles of track has been laid west of Port Morris Junction in three disconnected sections. At present, New Jersey Transit intends to resume rail service between Andover and Hoboken, New Jersey and to New York Penn Station via transfer to Midtown Direct service, by connecting to the existing NJT Montclair-Boonton Line and Morris & Essex Lines. Service is projected to start in 2010. Construction began in 2011 to restore passenger service in phases, and the first phase includes opening service along of track to Andover. Extensions of service have also been discussed, including the potential of restoring service to nearby Blairstown, New Jersey, stations in Pennsylvania with a proposed terminus in Scranton, Pennsylvania.
Construction
A disagreement over the replacement of a culvert on private property near the proposed station has delayed progress on the resumption of construction. As of early August 2017, an agreement has been made to replace the culvert with the property owner and continue building track to Andover.