Audi RS 6


The Audi RS 6 is a high-performance variant of the Audi A6 range, produced by the high-performance subsidiary company Audi Sport GmbH, for Audi AG, a division of the Volkswagen Group.
The first and second versions of the RS 6 were offered in both Avant and saloon forms. The third and fourth generations are only offered as an Avant.

Overview

The "RS" initials are taken from the RennSport – literally translated as "racing sport", and is Audi's ultimate 'top-tier' high-performance trim level, positioned a noticeable step above the "S" model specification level of Audi's regular model range line-up. Like all Audi "RS" models, the RS 6 pioneers some of Audi's newest and most advanced engineering and technology, and so could be described as a halo vehicle, with the latest RS 6 Performance having the equal most powerful internal combustion engine out of all Audi models, with the same horsepower and torque as the physically larger Audi S8 Plus. Unlike the A6 and S6, however, the RS 6's engines in the C5 and C6 iterations have not been shared with any other vehicle in Audi's lineup. However, for the C7 generation, the Audi RS 6 has the same 4.0L biturbo V8 engine as the Audi RS 7, with both being positioned at the top of the Audi S and RS range, and detuned variants of the same engines are found in the Audi S8, Audi A8, and Audi S6.
Based on the A6 platform, the RS 6's engines are front-mounted and longitudinally oriented, while the transmission is mounted immediately at the rear of the engine in a longitudinal orientation, in the form of a transaxle. Like all S and RS models, the RS 6 is only available with Audi's 'trademark' Torsen-based quattro permanent four-wheel drive system.
The C5 RS 6 was the fourth model to come out of Audi's private subsidiary company, "quattro GmbH". The first was the Audi RS 2 Avant, from a joint venture between Porsche and quattro GmbH for the Audi marque. The second was the Audi C4 S6 Plus, produced from April 1996 to July 1997. Third was the 2000 Audi B5 RS 4; the fifth was the 2005 Audi B7 A4 DTM Edition saloon, and the sixth was the 2006 Audi B7 RS 4. The seventh and current quattro GmbH model is the latest [|Audi C6 RS 6].
Production of the original [|Audi C5 RS 6] began in June 2002 and ended in September 2004. The second Audi C6 RS 6 was introduced at the 2007 Frankfurt Motor Show. The original RS 6 was the first Audi RS variant exported to North America, while the C6 and C7 RS 6 were only sold in Europe
Main rivals for the Audi RS 6 are the BMW M5 and Mercedes-Benz E 55/E 63 AMG.

C5 (''Typ'' 4B, 2002–2004)

The original Audi C5 RS 6 quattro was the top-of-the-line user of the Volkswagen Group C5 platform, and was initially available as a five-door five-seat Avant - Audis name for an estate or station wagon. A four-door five-seat saloon/sedan followed shortly after the launch of the Avant. Derived from the Audi C5 S6, the RS 6 also shares the aluminium structure from the firewall and forward with the C5 A6s with V8 engines. It was manufactured from July 2002 through to September 2004.
Official performance figures for the Avant, whilst consuming the recommended high octane 98 RON "Super Plus" unleaded petrol indicate the 0- dash would be completed in 4.6 seconds, reaching in 22.8 seconds. Official figures state an electronically limited top speed of, although most "RS" owners report that the speed limiter is rather liberal on all RS cars, with genuine 'limited' top speeds of being possible to achieve. Using a lower octane-rated petrol, such as the standard 95 RON "Premium" unleaded will reduce the engine power output, and have logical reduction in performance.
Luggage capacity, measured according to the VDA block method in the Avant ranges from, to with the rear seats folded down. For the saloon, the boot holds.

C5 powertrain

For the C5 RS 6 powertrain detail, the engine is an all-aluminium alloy twin-turbocharged, double overhead camshaft, 5 valve per cylinder version of Audi's 4.2-litre 90° V8 petrol engine, developed and manufactured in Germany and the UK by quattro GmbH and Cosworth Technology. With the addition of the two turbochargers, the power output of the V8 engine was increased to at 5,700 to 6,400 rpm, and generated of torque. The combination of the 4.2-litre V8, variable inlet valve timing, and twin turbochargers gave the RS 6 an exceptionally wide power band, with peak torque available from 1,950 to 5,600 rpm.
Further detail of the engine includes fully sequential electronic multi-point fuel injection with intake manifold-sited fuel injectors, mapped direct ignition system with solid-state high voltage distribution using eight individual single-spark ignition coils and NGK longlife spark plugs, and three knock sensors. Engine management uses a Bosch Motronic ME 7.1.1 engine control unit, which controls all functions of the engine operation; including fuel delivery, ignition system, valve timing, emissions control systems, and torque reduction control—the latter operating in conjunction with the Bosch ESP 5.7 Electronic Stability Programme, as part of the "Anti Slip Regulation" traction control system. The engine is compliant with the European Union Euro3 standard, and includes two close-coupled primary catalytic converters, two underfloor main CATs, and four heated oxygen sensors which manage the cylinder bank selective lambda control. This results in a CO2 emissions rating of 350 g/km for the Avant and saloon in standard configuration.
It has an electronically controlled five-speed ZF 5HP24A tiptronic automatic transmission , with lock-up torque converter in all forward gears. It has "hill detection" capability, and despite many press articles stating that the gearbox was programmed to "blip" the throttle for downshift gear changes, no UK owners have ever found this feature to be present. The transmission control unit ECU incorporates "fuzzy logic" with its "Dynamic Shift Programme", with the shift pattern adapting to suit individual driving styles. 'Tiptronic' manual control can be achieved with either the floor-mounted gear shift lever, or the steering wheel mounted 'paddles'.
The RS 6 was only available with Audi's Torsen-based quattro permanent four-wheel drive, utilising the Torsen T-2 dynamic 'automatic torque biasing' centre differential, a modified unit which was being used in the 6.0-litre W12-powered Audi D3 A8. The torque from the engine is first routed from the gearbox output shaft to the Torsen centre diff, and then automatically divided and apportioned between the front and rear axles.
The front and rear axle differentials are a conventional "open" type, but utilise an "Electronic Differential Lock". EDL is an integrated additional function of the Bosch Electronic Stability Programme system, and works by monitoring and comparing the individual
wheel speeds across an axle, and braking an individual wheel which is sensed to have lost traction, thus transferring torque across the axle to the wheel/tyre which does have grip. "Anti-Slip Regulation", more commonly known as traction control system completes the Bosch ESP-related driver aids.

C5 suspension and steering

Utilising the same fully independent four-link front suspension, and double wishbone rear, as its related A6 and S6, the RS 6 was lowered by, with a 30% stiffer spring rate, and 40% increased compression damping. The RS6 also served as the debut model for Audi's "Dynamic Ride Control" system. The DRC system is mainly mechanical, and uses a pump to provide additional pressure to individual dampers during cornering, acceleration or braking; to counteract rolling and pitching. The system can adjust the stiffness at each individual damper constantly; to maintain both a comfortable ride on straight roads, and high level of poise and grip when cornering hard, accelerating, or braking. The DRC's main advantage is that it operates without the need for complicated electronics, as required in similar systems from Mercedes-Benz and other competitors. Its main drawback is that the DRC dampers have been known to fail, which can affect the handling and ride quality of the vehicle; some owners have reported needing multiple replacements of faulty DRC units and many drivers have opted to replace the system with simpler and more reliable aftermarket coilover suspension.

C5 brakes, wheels and tyres

The front brakes feature fixed Brembo 8-piston monoblock brake calipers, working with radially vented and cross-drilled brake discs, sized at in diameter, by thick. The rear features single-piston floating ATE calipers with integrated cable-operated parking brake mechanism, mated to radially vented disc and cross-drilled, sized by. Front and rear brake calipers are finished in a high-gloss black paint, with the fronts incorporating the Audi "RS" logo. Both front and rear discs are held in by metal pins to the lightweight disc hub, and allow of lateral thermal expansion from the hub centre.
Bosch ESP 5.7 Electronic Stability Programme, with Anti-lock Braking System, Electronic Brakeforce Distribution, and Brake Assist was standard fitment.
There were a total of three original equipment manufacturer wheel and tyre types available with the RS 6. In Europe and elsewhere, 19-inch wheels were standard, with an optional 18-inch package. In the U.S. market, the 18-inch package was the only available offering. An 18-inch winter package, with Dunlop SP Winter Sport M3 tyres was universally available.
For 18-inch wheels, the standard tyre fitted was with eXtraLoad rating. This is often stressed, and is the only recommendation by Audi, as the RS 6 does weigh. Tyres which are not rated XL are not safe for use. Owners reported finding Continental ContiSportContact 2, Dunlop SP Sport 9000, Michelin Pilot Sport PS2, and Pirelli P-Zero Rosso as OEM suppliers for tyres on the RS6. However, according to ETKA, the Dunlop and Pirelli tyres were subsequently withdrawn from official supply, and the Continental SportContact 2 has been superseded by the SportContact 3. An additional tyre from Bridgestone has now been included as officially recommended fitment, the Potenza RE050A.
For 19-inch wheels, the standard tyre fitted was. as the XL rating achieves a . In contrast, the will get you, good for per tyre. Current officially recommended tyres from ETKA for the 19-inch rims only include the Michelin Pilot Sport PS2, Continental ContiSportContact 3 and Vredestein Ultrac Sessanta also 96Y XL.

C5 RS 6 Plus

Between April 2004 and September 2004, there was a final limited run of an even higher-performance RS 6, named the Audi RS 6 Plus. This had an increased engine power output, and produced at 6,000-6,400 rpm, with the same of torque at 1,950-6,000 rpm. This engine was also developed and manufactured in the UK by Cosworth Technology. The additional performance was achieved with a new engine control unit, and two additional coolant radiators behind the side-mounted intercoolers. Official performance figures indicate the discipline of sprinting from standstill to in 4.4 seconds. The RS 6 Plus carries on to reach in 20.36 seconds, and has an official top speed of.
The RS 6 Plus came with Dynamic Ride Control as standard, and also included a no-cost option of "Sports Suspension Plus", which lowered the standard sports suspension by a further over the standard RS 6. A revised steering rack, with a reduced ratio of 14.3 for firmer steering feel was included, and resulted in a turning circle of. The brakes now included cross-drilled discs. The wheels were only available in the 9Jx19-inch '5-arm design' alloys, finished in "anthracite", with tyres.
The car was available only as an Avant, and was sold only in European markets. Visual differences for the RS 6 Plus included the "black optic pack", which consisted of black finish to the framing of the radiator grille, exterior window trims, tailgate lower trim, roof rails, and exhaust tailpipes. It quickly sold out once it was released. The last three digits of the Vehicle Identification Number are reproduced on a plaque inside the car, displayed on the centre console.

C5 RS 6 in auto racing

The RS 6 was used in the North American SPEED World Challenge GT Series of auto racing for three years - 2002 to 2004, claiming the manufacturers' championship victory successively in all three years. Once again, the special race derivative of the twin-turbo V8 engine was developed and manufactured in the UK by Cosworth Technology. However, the 2005 season proved difficult due to performance restrictions imposed on Champion Audi Racing by the Sports Car Club of America, with Champion deciding to run a different wheel diameter, and the trade-off was reducing boost pressure.

C6 (''Typ'' 4F, 2008–2010)

The second-generation RS 6, later called the Audi RS 6 5.0 TFSI quattro was based on the Volkswagen Group C6 automobile platform and was launched in September 2007 at the Frankfurt Motor Show. With factory production starting in December 2007, it was available in Europe from the same date, and began to be exported elsewhere in 2009. The total production run of the C6 RS 6 was 8,000 units, with 6,500 of these being Avants and the remainder saloons. The RS 6 was not available in North America, leaving the Audi S6 as the top performing trim there.. Production of the C6 RS 6 ended in the third quarter of 2010.
The RS 6's V10 engine produced at 6,250 to 6,700 rpm and of torque from 1,500 to 6,250 rpm, and more than BMW's 5.0L V10., the RS6 was Audi's single most powerful car ever, and positioned the car ahead of its closest competitors, the BMW M5 and the Mercedes-Benz E63 AMG in terms of engine output, both of which have naturally aspirated engines. However the estimated price of the RS 6 sedan in 2010 was $160,000 USD which set it apart from the performance variants of other executive cars: the MRSP of BMW M5's was $85,700 USD, of Mercedes-Benz E63 AMG's was $87,700 USD, and of Audi's own S6 was $78,025 USD.
Official performance figures for the Avant: 4.6 seconds for the 0- sprint, 12.7 seconds 0-, and top speed is electronically limited to, with a factory option to de-restrict the top speed to. In standard form, CO2 emissions are rated at 333 g/km. The saloon reaches 0- in 4.5 seconds.

C6 bodywork and styling

The C6 RS 6 Avant was launched in April 2008, and the four-door saloon/sedan was available from August 2008. Constructed from steel in a monocoque design, the RS 6 uses lightweight aluminium for its front wings and bonnet.
Visually, the RS 6 differed from the related S6, having flared front and rear wheel arches, harking back to the original Audi Quattro, to allow for a wider wheel track. It also had no front fog lights to allow for larger frontal air intakes. The ten front light-emitting diode daytime running lights are located within the main headlamp housing on the RS 6 in order to increase the size of the air intakes, whereas similar LEDs on the related S6 are found adjacent to the fog lamps in the lower front bumper. LED lighting technology was also used in the rear lights. The RS 6 also included adaptive headlights, which swivel around corners in conjunction with steering wheel movements. The facelifted Audi A6, released as a 2009 model, received similar front and rear-end LED lighting styling to that pioneered on the RS 6.
Luggage capacity, measured according to the VDA 'block method' in the Avant ranges from, to.

C6 powertrain

The engine of the RS6 was what Audi claimed to be the first all-aluminium alloy even firing 5.0-litre 90° V10 twin-turbocharged, Fuel Stratified Injection, with a dry sump lubrication system. This engine is related to the naturally-aspirated V10 found in the Audi R8, S6 and S8, but the RS 6's engine has around 400 unique parts.
The engine has four valves per cylinder, with chain-driven double overhead camshafts, and variable valve timing for both inlet and exhaust camshafts. Charged intake air is cooled by two side-mounted intercoolers s. The engine is controlled by two Bosch DI-Motronic MED 9.1.2 engine control units, which act as 'master' and 'slave': two ECUs are required due to the high revs the engine can achieve. It also uses mapped direct ignition system with ten individual direct-acting spark coils, an electronic drive by wire throttle, cylinder-selective knock control, and cylinder bank adaptive lambda control, utilising eight lambda sensors.
A total of seven radiators, and four electric cooling fans are needed to cool the engine and related components under the aluminium bonnet of the RS6.
Drive output passes through a ZF 6HP28A six-speed tiptronic automatic transmission. The gear ratios are: 1st: 4.171, 2nd: 2.340, 3rd: 1.521, 4th: 1.143, 5th: 0.867, 6th: 0.691, with shortened shift times, with "Dynamic Shift Programme" and "Sport" mode. It has paddle-shifts mounted behind the flat-bottomed steering wheel, similar in design to the Audi B7 RS 4. The gearbox is set by default, in conventional automatic mode, to delay up-changes during acceleration, and change down earlier to maximise engine braking. Downchanges in all modes of operation include the Powertrain Control Module electronic control unit "blipping" the Bosch "E-Gas" drive by wire throttle, for smoother shift changes. The hydraulic torque converter includes a lock-up function in all forward gears, and is able to completely disconnect when the vehicle is stationary, thus saving fuel.
Like all Audi "RS" models, the RS 6 is fitted with Audi's 'trademark' quattro permanent four-wheel drive as standard. This version of the RS 6 uses the latest asymmetric dynamic 40:60 front-to-rear default torque distribution from the Torsen T-3 'automatic torque biasing' centre differential. This latest incarnation of the Torsen quattro, first seen in the B7 RS 4, can automatically dynamically apportion up to a maximum 100% torque to the rear axle, or up to 80% to the front, dependent on traction conditions.
The front and rear final drives are conventional "open" differentials, and use the Audi "Electronic Differential Lock". EDL is a part, or "function", of the Bosch ESP 8.0 Electronic Stability Programme, which also includes "Anti-Slip Regulation" traction control system. EDL does not 'lock' the differential in a traditional sense, but uses electronics to compare the speeds of the two wheels on an axle, and brakes any wheel that is sensed to have lost traction. This braking of a slipping wheel has the effect of transferring torque across the axle to the other wheel, which is assumed still to have traction.

C6 steering and suspension

Like the previous RS6 and the B7 RS 4 this generation of RS 6 includes Audi's "Dynamic Ride Control" Sports suspension system. The system is mainly mechanical, using a pump to provide additional pressure in the diagonally linked dampers during cornering, to counteract rolling and pitching. The system can dynamically adjust the stiffness at each damper constantly to maintain both a comfortable ride and high grip. On this version, it has a three-way level control, selectable from the Multi Media Interface controls.
The steering system includes rack and pinion speed-dependent "servotronic" power steering, with a ratio of 12.5, and a turning circle of 12.2 metres.

C6 brakes, wheels and tires

The standard brakes on the RS 6 are cross-drilled, radially vented and floating iron discs. At the front they are diameter and thick, clamped by gloss black six-piston fixed Brembo monoblock alloy calipers incorporating the "RS" logo, and at the rear they are diameter and with black single-piston floating calipers and an integrated electro-mechanical parking brake linkage. The parking brake serves doubles as a full emergency brake whilst the car is in motion, by applying maximum braking effort to all four wheels, resulting in activating the Anti-lock Braking System.
Optional "Audi ceramic" Carbon fibre-reinforced Silicon Carbide composite front brakes are available, only with 20-inch wheels, which use diameter by thick drilled, vented, and floating SGL Carbon composite discs, with grey painted eight-piston fixed Alcon monobloc alloy calipers with the "Audi ceramic" logo.
Irrespective of the type of disc construction, all brake discs are mounted via high strength steel mounting pins which connect the 'working' surface of the disc to lightweight alloy disc hubs.
A specifically 'tuned' "sport-biased" Bosch ESP 8.0 Electronic Stability Programme is standard, and includes Anti-lock Braking System and Electronic Brakeforce Distribution, and Brake Assist. This ESP system has three user-selectable settings: "ESP-on" - the standard default full protection mode, "ESP-sportmode", and "ESP-off".
Standard wheels are 9.5Jx20-inch '5-segment-spoke' design alloy wheels running on tyres, with official supplies being either Pirelli P-Zero Rosso or Dunlop SP SportMaxx GT. No-cost options are 9.5Jx20 '7-arm double spoke' design, or 9Jx19-inch '10-spoke' design alloys with Michelin Pilot Sport PS2 tyres.

C6 other notable features

Audi revealed the details of the RS 6 Avant on December 5, 2012. Its twin-turbo TFSI V8 engine develops at 5700-6600 rpm and of torque at 1750-5500 rpm. This will enable the RS 6 Avant to accelerate from 0 to in 3.9 seconds. The top speed is limited to by default. By adding the optional Dynamic or Dynamic Plus package, this top speed is increased to respectively or. Audi claims an average fuel consumption of and CO2 emissions of 223 g/km. In order to accomplish this, Audi has added a start-stop system and a cylinder on demand system. The RS 6 Avant is offered with an 8-speed tiptronic transmission.

C7 RS6 Performance

The RS6 Avant Performance is powered by the same 4.0-litre TFSI twin-turbo V8 engine as the standard RS6, but with the help of a retuned ECU mapping, it increased power output to at 6100-6800 rpm and increased torque to at 2500-5500 rpm. While the top speed remains limited to, or with Dynamic Plus package, the 0 to time has been reduced to just 3.7 seconds at from 0 to in 12.1 seconds. Despite the improved performance, the fuel economy and CO2 are unchanged from the standard RS6 Avant.

C8 (''Typ'' 5G, 2019–Present)

As with the previous generation, the new RS6 is powered by a 4.0-litre twin-turbo TFSI petrol engine, now boosted by a 48V belt alternator/starter mild-hybrid system, which can recover up to 16bhp. The engine also utilises a cylinder-on-demand system that can shut off half of its cylinders to boost fuel economy.
The powertrain produces 600ps – up from 560ps of the previous generation, but slightly below the 605ps offered by the 2016 Performance variant – with 590lb ft available between 2100rpm and 4500rpm.
The acceleration to 100 km/h takes 3.6 seconds and 200 km/h in 12 seconds. As standard, top speed is limited to 250 km/h, with a further two levels courtesy of optional packs – the Dynamic package allows 280 km/h, while the Dynamic package plus grants even more headroom for a maximum of 305 km/h. The C8 is first RS 6 Avant to have the hybrid drivetrain, utilising Riemen-Starter-Generator and 48-volt electrical system. The quattro system has power distribution with 40% for front and 60% for rear. The system can adjust the power distribution up to 70% for front and to 85% for rear if needed. The adaptive suspension system is 20 mm lower than standard A6 and can lower the vehicle further 10 mm during the high speed driving or can raise the ride 20 mm at low speed. The Drive Select function gains configurable RS1 and RS2 modes, which are activated by an ‘RS mode’ button positioned on the steering wheel. As well as adjusting the engine and handling responses, they also enable bespoke information on the Virtual Cockpit system.
Under the new Euro-7 emissions law, Chairman of the Management Board of Audi, Herbert Diess recently said "The RS range set for 2022 will be the biggest change in the production line since 2004. The new RS range will be the most economical, low emission with the RS6 and Q8 will both have electric hybrid engines to reduce the current emission by 27%." The new Electric range will begin production in the Audi Sport GmbH Neckarsulm factory in Germany. The new RS range is set to be in Australia in mid 2023, and is said to have a three-cylinder hybrid plug-in, also currently being taken on by Mercedes Benz in order to comply with the new Euro-7 emission law.
The new RS 6 Avant will also be sold in the US for the first time. The closest equivalent of RS 6 Avant in the past was the RS 7 Sportback.