Brough Superior


Brough Superior motorcycles, sidecars, and motor cars were made by George Brough in his Brough Superior works on Haydn Road in Nottingham, England, from 1919 to 1940. The motorcycles were dubbed the "Rolls-Royce of Motorcycles" by H. D. Teague of The Motor Cycle newspaper. Approximately 3048 motorcycles were made in the 21 years of production; around a third of that production still exists. T. E. Lawrence owned eight of these motorcycles and died from injuries sustained when he crashed number seven; the eighth was on order. Moving forward to 2008, vintage motorcycle enthusiast Mark Upham acquired the rights to the Brough Superior name. In 2013 he met motorcycle designer Thierry Henriette and asked him to design a new Brough Superior motorcycle. Three months later a prototype of a new SS100 was shown in Milan.

History

George Brough was a racer, designer, and showman - his father William E. Brough had been making Brough Motorcycles in Nottingham since 1908, and continued to do so until 1926. Convinced he could improve on his father's designs, all Brough Superior motorcycles were high performance and superior quality. Most were custom-built to the customer's needs, and rarely were any two of the same configuration.
Each motorcycle was assembled twice. The first assembly was to fit all the components. Then the motorcycle was disassembled and all the parts painted or plated as needed. Finally, the finished parts were assembled a second time. Every motorcycle was test ridden to ensure that it performed to specification, and was personally certified by George Brough. The SS100 model was ridden at or more before delivery. The SS80 model was ridden at or more before delivery. If any motorcycle did not meet specification, it was returned to the works for rework until it performed properly. The fit and finish was comparable to a Rolls-Royce car, and they were the most expensive road-going motorcycles in the world.
Brough Superior motorcycles have always been rare and expensive. Prices for these motorcycles ranged from £100 to £185 in the 1920s and 1930s. Since the average annual salary in Britain during the 1930s was £200, only the wealthy could afford them.
In 1940, World War II brought an end to production as the factory was engaged on war work, completing crankshafts for Rolls Royce Merlin engines.. After hostilities had ceased there were no suitable engines available so the company was wound up. In 2004, around 1,000 Brough Superior motorcycles still existed, maintained by enthusiasts.
In 2016 eight Brough Superior motorcycles were found which had been gathering dust and rust in a barn in Bodmin in Cornwall for 50 years.

Brough Superior motorcycles

Early models include the Brough Superior Mark I Sidevalve, Mark I Overhead, Mark II Standard and Mark II Sports. Early to mid manufacture included the Overhead 500, 680 S.V. Junior, and 750 Side Valve, but these were not popular and were dropped from production.
The following four models represent the bulk of manufacture. Most were custom built to order and many variations were made:
Brough Superior produced many other experimental, show, and racing models. These include:
George Brough was known for his dedication to his vehicles and customers. He, and later Albert Wallis, continued to service Brough Superiors after production ceased, making parts until 1969. To all intents and purposes production of bikes never resumed after WWII.

Production figures

To this list may be added thirteen motorcycles without a date on their build card. Many records are incomplete for the first few years of production and for some of the low production models. The estimated total production was 3,048 vehicles.

Racing

Riders of Brough Superiors have won many races—sprints, hillclimbs, and top speed. Victories include:
In 2013 Brough Superior said it would return to Grand Prix motorcycle racing with a prototype machine for Moto2, the Carbon2, a motorcycle made by California builders Taylormade and rebranded as a Brough Superior.

Brough Superior sidecars

Brough Superior also manufactured sidecars. The sidecars had coach-built bodies, and some carried a spare tyre, while others offered two seats for occasional use. The fit and finish of these sidecars were of the highest standard, as were the motorcycles. These sidecars all offered good protection from the elements. Many of the earlier sidecars were built to Brough Superior specification, while later sidecar frames were manufactured in the Brough Superior factory. Later sidecars were unique in the fact that the frame of the sidecar held fuel. The sidecar frame looped over the top of the sidecar body and had a filler cap at the topmost position. Fuel was pressurized by a hand pump that transferred fuel from the sidecar to the petrol tank on the motorcycle. Two different bodies could be ordered for the petrol tube sidecar; cruiser or sports.
The various sidecars were offered in the yearly Brough Superior sales catalogs:
George Brough made approximately 85 cars named Brough Superior. Built between 1935 and 1939, they were powered by Hudson engines and had a Hudson chassis. Three models were made, but only two reached production. Early cars did not carry Brough Superior badges as Brough thought the cars sufficiently distinctive in themselves.
The first car was the 4 litre made from May 1935 to 1936 using a, 4,168 cc side valve, straight-eight engine. Performance was remarkable for the time with a top speed of and a 0- time of under 10 seconds. Only a four-seat drop head was available with coachwork by W.C Atcherley of Birmingham. 19 were made and nine are known to have survived. This Brough designed, Atcherly coachwork of classic lines has steel guards, aluminium body over ash frame and is handsome, strong and durable. Unrestored examples are still roadworthy over 80 years later.
Hudson Canada stopped supplying the eight-cylinder engine and chassis kits in 1936, and subsequent cars had a, 3,455 cc straight-six, still with side valves and called the 3.5 litre. A Centric supercharged version was also listed with a claimed output of. The chassis was shorter than the 4 litre at 116 inches. Saloon bodies were available but most were open cars. Approximately 80 were made between 1936 and 1939.
The final car, the XII made in 1938, used a Lincoln-Zephyr V12 engine of 4,387 cc and Brough's own design of chassis with Girling brakes and Ford axles. Only one was made with a saloon body built by Charlesworth. A large car with an overall length of and width of, it still survives.
Journalist Bill Boddy tested an early model Brough Superior Saloon in 1936 for Motor Sport magazine. Noting the car had a reserve fuel tank, he declined to fill up before the journey. Upon running out of petrol, he could not find the switch to activate the reserve. After begging petrol from a passing lorry Boddy then encountered a motorcyclist who had crashed, and offered to help. When asked, he told Boddy that his bike was a Brough Superior and asked what was, "...the nice car in which you are giving me a lift." When told it was a Brough Superior the motorcyclist was silent for the rest of the journey. Boddy presumed this was incredulity that a famed motorcycle maker could also manufacture cars, and supposed that the motorcyclist presumed he was concussed.

Etymology

The Brough surname, as with many English surnames that look like placenames, probably arose because one of George Brough's male-line ancestors came from one of several places in Britain so called. It is originally a form of the word "borough". "Superior" was a claim by George Brough of his bike's superiority over all other motorcycles, including the original Brough Motorcycles manufactured by his father, William E. Brough.

Revival

The Brough Superior make and name was purchased by a Jersey-registered corporation, with Mark Upham as CEO. Upham produced several 'continuation' examples of ca.1926 Brough Superior SS100s, and negotiated with Thierry Henriette of to produce a newly designed Brough Superior motorcycle. Upham insisted on retaining visual cues linking the new motorcycle with the historic Brough Superior design, as well as retaining the original ethos of the Brough Superior marque - innovation, excellent design, and superior construction and materials. The new Boxer-designed Brough Superior SS100 first appeared at the EICMA show in Milan in 2013; serial production began in 2016.
The new Brough Superior SS100 features an 88degree, 990cc v-twin engine, with water cooling and DOHC four-valve cylinder heads, designed and built by Boxer Design. The engine produces 120 hp in standard tune, and the chassis uses the engine as a stressed member, with a Fior-based front fork with Ohlins shock absorber, with Ohlins monoshock rear suspension. The chassis is made entirely of exotic materials, including titanium, carbon fiber, and aluminum. The front brakes are from Beringer, with four rotors, sourced from the aircraft industry. The minimal bodywork is constructed of hand-hammered aluminum, including the fuel tank, seat cowl, fenders, and side covers. The dry weight of the SS100 is just under 400 lbs, making it among the lightest 'litre bikes' ever produced for street use.
Press reaction to the new SS100 has been generally positive. Road tests have praised the smooth engine, excellent handling, and contemporary performance, with some journalist praising the overall design aesthetic, although this seems a point of contention.