Marine composite propellers often refer toship propellers, usually made from fiber composites like glass or carbon fibers infused with a high-strength resin like epoxy or polyimide. These kinds of composites made are strong, light and high-tech materials. Such composite propellers can be produced in several ways, including vacuum infused molding and injection molding process, depending on size and resin viscocity. With today's technology composites propellers cannot be said to be undeniably better than traditional metal alloys in the marine propellerapplication. The composite material does still have several perks compared to the metal propellers counterparts.
Advantages
The composite propellers can be made with a layup which causes composites with anisotropic properties. This can be designed to make create passive adaptation of the propeller blades passive self-twisting propeller. Self-twisting blades have been found to be much more energy efficiency compared to rigid propeller blades. Passive adaptation in form might also be affected bu propeller geometry. Lower unit production cost' and production without heat are the primary advantages of composite material. While the initial cost of a composite propeller is usually comparable to aluminum, it is significantly less than a stainless steel propeller. Additionally, replacement blades offer significant savings over metal propeller repairs. Another advantage to using composite propellers is that it is a lightweight material. Composite material is about half the weight of aluminum and 1/6 the weight of stainless steel propeller. A lightweight propeller reduces the amount of wear and tear on the entire boat '.
Composite materials are an environmentally friendly option as the corrosive resistance and resistance to impact damage of composites can lead to long lifetime in composite propellers. When a composite propeller hits debris, the propeller absorbs the impact energy, instead of transferring it to the lower unit; therefore, providing more protection for the drive train'. Corrosion from salt water, and electrolysis are basically nonexistent with composite material in water', still the water saturation of the propellers and the propeller application causes some problem to the longevity of composite propellers.·The corrosive resistant properties of composites cannot be said to be undeniably better than traditional metal alloys in the propeller application with today's technology .
