Douglas DC-5


The Douglas DC-5 was a 16-to-22-seat, twin-engine propeller aircraft intended for shorter routes than the Douglas DC-3 or Douglas DC-4. By the time it entered commercial service in 1940, many airlines were canceling orders for aircraft. Consequently, only five civilian DC-5s were built. With the Douglas Aircraft Company already converting to World War II military production, the DC-5 was soon overtaken by world events, although a limited number of military variants were produced.

Design and development

The DC-5 was developed in 1938 as a 16-22 seat civilian airliner, designed to use either Pratt & Whitney R-1690 Hornet or Wright R-1820 Cyclone radial engines. It was the first airliner to combine shoulder wings and tricycle landing gear, a configuration that is still common in turboprop airliners and military transport aircraft, although the modern versions are actually high wing, as the structure sits atop the fuselage shell rather than intersecting a significant segment.
The tricycle landing gear was innovative for transport airplanes. It provided better ground handling and better ground visibility for the pilots. The fuselage was about two feet above the ground, so loading of passengers and cargo was easier than aircraft with the then-standard conventional landing gear.
A very early design change was the addition of a 15-degree dihedral to the horizontal tail group to negate a hint of an aeroelasticity problem. The dorsal strake, introduced in minimal form and expanded to full growth on the Boeing 307, is also well developed on the DC-5. Another significant modification was adding exhaust stacks to the engine nacelles, which was retroactively incorporated after the series entered production. An unusual optical trick was applied to the prototype. The top of the vertical stabilizer and the outline of the engine nacelles were painted a darker color following the aircraft's contour, making the tail and engines appear somewhat smaller and the aircraft sleeker.
Prior to the US entry into World War II, one prototype and four production aircraft were built.

Operational history

The prototype DC-5, Douglas serial 411, was built at El Segundo, California with 1,000 hp Wright R-1820-44 Cyclone engines. The aircraft made its first flight on February 20, 1939 with Carl Cover at the controls. This sole prototype became the personal aircraft of William Boeing, who named it Rover. It was later impressed into the US Navy and converted for military use as an R3D-3 variant in February 1942.
The first customer for the type was KNILM of The Netherlands Antilles. A US domestic carrier, Pennsylvania Central, ordered six and SCADTA,, ancestor of today's Avianca in Colombia, another two. The four aircraft sold to KNILM were used in the Caribbean. When Douglas factories went into war production, DC-5 production was curtailed to build additional SBD Dauntless dive bombers for the United States Navy and United States Marine Corps and only KLM received the high-winged airliner.
A dozen DC-5s were completed. The first two initially flew between Paramaribo in Surinam and Curaçao in the Dutch colonial territory of the same name, and the other two operated in the Dutch East Indies for KNILM from Batavia ; the first pair were later transferred to KNILM. Of these four aircraft, three were used for the 1942 evacuation of civilians from Java to Australia; the fourth was damaged in an air strike by the Imperial Japanese Army Air Force at Batavia Kemajoran Airport on February 9, 1942 and abandoned. Japanese forces captured it, and subsequently repaired and tested it in Japan during 1943. This DC-5, painted in camouflage with Japanese Imperial Army Air Force markings, was later used as a transport in the Japanese Home Islands.
The three remaining aircraft made their way safely to Australia where they were sold to the United States Army Air Forces and operated for the Allied Directorate of Air Transport. Two were destroyed by the end of 1942, the other was transferred to Australian National Airways, which operated it throughout the war on behalf of ADAT. In 1944 the USAAF retroactively designated the three aircraft C-110 for administrative purposes.
In 1939, the USN ordered seven aircraft. Three were delivered as R3D-1s, the first of which crashed before delivery. The remaining four were R3D-2s for the USMC and were equipped with 1,015 hp R-1820-44 engines, a large cargo hold, and 22 seats for paratroopers.
After World War II, production of the DC-5 was not resumed because of the abundance of surplus C-47 aircraft released into civil service and converted to DC-3s. In 1948, the last surviving DC-5 was sold by Australian National Airways to another Australian airline, which smuggled it to Israel for military use. The aircraft arrived at Haifa in May 1948, and from there it went to Sde Dov, where its markings were removed and the name "Yankee Pasha – The Bagel Lancer" was crudely painted on the nose by hand. The aircraft joined 103 Squadron at Ramat David Airbase. Because Israel was in the midst of the 1948 Arab–Israeli War, it was occasionally used as a bomber as well as flying transport missions. On bomber missions the aft loading door was removed and bombs were rolled out of the opening "by a judicious shove from a crewman's foot." The operational record of the aircraft is in dispute as authoritative sources do not verify its combat service.
When the war ended and 103 Squadron moved, the DC-5 was left behind at Ramat David. It eventually found its way to a technical school where it was used extensively as a ground instruction airframe at Haifa Airport. When it was no longer serviceable due to a lack of spares, the airframe was stripped of its engines and instruments and the last DC-5 was reduced to scrap in Israel sometime after 1955.

Variants

;Prototype DC-5
;DC-5
;C-110
;R3D-1
;R3D-2
;R3D-3

Operators

Military operators

;Australia
;Israel
;Japan
;United States
;Australia
;Dutch West Indies
;Dutch East Indies
;United States