The Farr 38, also called the Farr 11.6m, is a sailboat that was designed by New ZealanderBruce Farr as a racer-cruiser and first built in 1978. It is Farr Yacht Designnumber 72. The Farr 38 is sometimes confused with an earlier Farr 38 design. This unrelated design was produced as a single boat, the Jenny H, constructed in 1977.
Production
The design was built on a production basis in Australia, Brazil, Canada, New Zealand and South Africa. It was built by Spindrift Yacht Inc in Canada and by Marina Bracuhy in Brazil. A number of boats were built by amateur boatbuilders from purchased plans as well. Collectively they completed 85 examples, with production commencing in 1978, but it is now out of production.
Design
The Farr 38 is a recreational keelboat, built predominantly of cold-moulded wood, finished with epoxy and polyurethane and fibreglass. It has a fractionalsloop rig with polyurethane-painted aluminum spars, a raked stem, a reverse transom, an internally mounted spade-type rudder controlled by a tiller or optional wheel and a fixed fin keel. It displaces and carries of ballast. The boat has a draft of with the standard keel fitted. The boat is fitted with a Pathfinderdiesel engine of for docking and manoeuvring. The fuel tank holds and the fresh water tank has a capacity of. The design has sleeping accommodation for eight people. There is a bow cabin, with a "V"-berth, two settee berths in the main cabin and two quarter berths aft, one of which is a double berth. The galley is located on the starboard side at the foot of the companionway steps and features a two-burner liquefied petroleum gas stove and an oven. Pressurized water and a refrigerator were factory options. The navigation station is to port, opposite the galley. The head is located just aft of the bow cabin, on the port side and includes a shower. Sail controls include four halyard winches, two secondary and two primary jib winches and a one general purpose winch. The halyards and outhaul are mounted internally, as is the jiffy reefing system. There is a 4:1 mechanical advantageboom vang, as well as an adjustable backstay. The mainsheet traveller is mounted on the bridge deck and genoa tracks and lead blocks are provided. The boat can be fitted with a spinnaker for downwind sailing. Anodized spars and a wooden deck made from cedar were also factory options. The design has a PHRF racing average handicap of 83.
Operational history
In a 1994 review Richard Sherwood wrote, "cold-molded wood, unusual in a boat of this size, is used for construction. The hull framing is cedar and the skins, spruce. Planking is thin strips adhesive-bonded in diagonal and longitudinal laminations. The result is a high-performance cruiser that has been successfully raced."
