Ferrari 250 GT SWB Breadvan


The Ferrari 250 GT SWB Breadvan is a one-off Ferrari made in 1962 from a 1961 Ferrari 250 GT SWB, chassis number 2819 GT. It was built to compete against the new 1962 Ferrari 250 GTO at the 24 Hours of Le Mans and other FIA World Sportscar Championship races.

Development

In 1962, the engineer Giotto Bizzarrini was hired by Count Giovanni Volpi, owner of the Scuderia Serenissima racing team, to upgrade a Ferrari 250 GT SWB so it would be competitive with the then-new Ferrari 250 GTO. Enzo Ferrari had refused to sell any GTOs to Count Volpi, due to Volpi's hiring of former Ferrari employees at ATS.
The donor car for this project was a 250 GT SWB Competition, serial number 2819 GT. This car had previously competed in the 1961 Tour de France, where it took 2nd place overall driven by Olivier Gendebien and Lucien Bianchi. The car was sold by Gendebien to Volpi shortly afterward for use with Scuderia Serenissima. As with other competition-spec SWBs, this car had a lightweight body and chassis, minimal trim, and a more powerful 286 bhp Tipo 168 engine with Testarossa-type heads.
Bizzarrini applied all the ideas he had developed working on the GTO and together with the car body specialist Piero Drogo developed an aerodynamically advanced body, even lower than the GTO's, with the roof line dramatically extended to the rear end following Kamm aerodynamic theory. The resulting shooting-brake appearance led to the French press nicknaming it "La Camionnette", while the English-speaking journalists called it the "Breadvan."
Bizzarrini moved the engine and radiator further back to the center of the chassis than the GTO, and lowered it by fitting a dry sump system. The original three 46 DCN Weber carburetors were replaced with six twin choke 38 DCN Webers. The original 4-speed gearbox was retained. Giorgio Neri and Luciano Bonacini of Modena were contracted to perform all the mechanical modifications and race preparation. The resulting car was significantly lighter than the GTO, at compared to the typical GTO weight of.

Competition history

The rebodied Breadvan made its competition debut at the 1962 24 Hours of Le Mans. It quickly passed all Ferrari GTOs and was 7th overall during the 4th hour when a driveshaft failure caused its retirement. Results at other races proved the design's effectiveness, as the car won the GT class in two races during the 1962 season. The car's last race in period was at the Coppa Gallenga Hillclimb in 1965, however since 1973 it has appeared regularly at historic races worldwide, including events such as the Monterey Historic Automobile Races, the Goodwood Festival of Speed and the Tour Auto.
DateRaceCircuitTeamDriverResultNotes
September
14-23
1961
Tour de FranceTour de FranceEcurie FrancorchampsOlivier Gendebien
Lucien Bianchi
2nd GT
2nd OA
with original 250 GT SWB body
October 22
1961
1000 km de ParisMontlhéryScuderia SerenissimaMaurice Trintignant
Nino Vaccarella
3rd GT
3rd OA
with original 250 GT SWB body
June 23–24
1962
24 Hours of Le MansCircuit de la SartheScuderia SerenissimaCarlo Maria Abate
Colin Davis
DNFFirst race as Breadvan, was running 7th overall when drive shaft failed in 4th hour
August 6
1962
Guards TrophyBrands HatchScuderia SerenissimaCarlo Maria Abate
Colin Davis
1st GT
4th OA
August 26
1962
Ollon-Villars HillclimbOllon-VillarsScuderia SerenissimaCarlo Maria Abate1st GT
4th OA
Set new GT course record of 4m 47.3s at 100.243 km/h
October 21
1962
1000 km de ParisMontlhéryScuderia SerenissimaColin Davis
Ludovico Scarfiotti
3rd GT
3rd OA
November 11
1962
Puerto Rican GPCaguas, Puerto RicoScuderia SerenissimaJuan Manuel BordeuDNSEntry withdrawn after death of Ricardo Rodríguez at the Mexican GP
March 28
1965
Coppa Gallenga HillclimbCastel GandolfoUnknownEdgardo Mungo9th OACar painted silver

Influence

The 250 GT SWB Breadvan's unusual but effective aerodynamics proved the Kamm tail design that would be used on many other racing cars, including the Ford J-car and the Alfa Romeo Giulia TZ.
Following the success of the Breadvan, two additional 250 GT SWB cars were modified for privateer drivers by Bizzarrini, Drogo, Neri and Bonacini, distinctively bodied with similar shapes. A third modified Ferrari was planned but not completed. An Iso Rivolta, chassis number IR460368, was also rebodied by Drogo in a similar style to 2819 GT.
Similar shooting brake designs were used on later Ferrari concept cars and production cars such as the 456 GT Venice and the Ferrari FF.