Georgia State Route 27


State Route 27 is a state highway that travels west-to-east through portions of Quitman, Stewart, Webster, Sumter, Dooly, Pulaski, Dodge, Telfair, Jeff Davis, Appling, Wayne, and Glynn counties in the southern part of the U.S. state of Georgia, crossing nearly the entire state from Georgetown, just east of the Alabama state line to Brunswick, just west of the Atlantic coast.
The route connects US 82/SR 39/SR 50 in Georgetown with US 17/SR 25 in Brunswick, via Lumpkin, Preston, Americus, Vienna, Hawkinsville, Eastman, Helena–McRae, Hazlehurst, Baxley, and Jesup. The highway is concurrent with US 280 and US 341 for most of its length.

Route description

SR 27 begins at an intersection with US 82/SR 39/SR 50 in Georgetown, within Quitman County. SR 27/SR 39 travel concurrently to the northeast. Then, the two highways diverge with SR 27 continuing through rural areas of the northeastern part of the county. The highway enters Stewart County, before entering Lumpkin. There it intersects US 27/SR 1. Three blocks later is the southern terminus of SR 1 Conn.. Farther to the northeast, in Richland, is an intersection with US 280/SR 520. At this intersection, US 280/SR 27 begin a concurrency to the east. After leaving town, the concurrency enters Webster County. They curve to the southeast and enter Preston, where SR 41 briefly joins the concurrency. Farther along, US 280/SR 27 enter Sumter County. They enter Plains. In town is an intersection with SR 45. The two highways stairstep their way to the east-northeast toward Americus. Just before entering town, first SR 49, and then US 19/SR 3, join the concurrency. The five highways enter the city limits and curve to the northeast. Next to the Perlis Plaza Shopping Center, they intersect SR 30. At this intersection, US 280/SR 27/SR 30 east/SR 49 turn to the right, while US 19/SR 3/SR 30 west continue to the northeast. The four highways intersect SR 377. Just past Oak Grove Cemetery, SR 49 departs the concurrency on Tripp Street. Next to Pine Pointe Shopping Center, SR 27 departs the concurrency to the east on Vienna Road and passes Shipp Lake and Pat Crumpton Lake, before intersecting SR 195. After that, it crosses over the Flint River into Dooly County. The highway travels to the north of Bartenfield Lake and enters Vienna. Just inside the city limits, it intersects SR 90. The two highways travel concurrent into the main part of town, to an intersection with US 41/SR 7. At this intersection, SR 90 leaves the concurrency to the south, while SR 27 continues to the east-southeast. It passes George Busbee Park and meets the western terminus of SR 215. Here, SR 27 curves to the north-northeast and leaves town. It curves to a more northeasterly routing and has an interchange with Interstate 75. Then, it curves to a nearly due-east orientation. After a bend to the northeast, the highway enters Pulaski County.
There are two portions of SR 27 that are part of the National Highway System, a system of routes determined to be the most important for the nation's economy, mobility, and defense:

1920s

SR 27 was established at least as early as 1919 from Hawkinsville to a point northwest of Brunswick. It was also designated south-southwest and curved to the southeast to end at SR 40 northwest of St. Marys. At this time, SR 28 was established from SR 39 in Georgetown to SR 7 in Vienna. By the end of 1921, SR 50 was established on its current path in Georgetown, becoming SR 27's new western terminus, since SR 39 was shifted southeast and out of the city. The eastern terminus of SR 27 was then indicated to be at SR 25 in Brunswick. SR 27 had a segment northwest of Brunswick, which meant that it intersected itself. It was then proposed south-southwest to SR 40 in Kingsland. By the end of 1926, US 341 was designated on SR 27 from Hawkinsville to Brunswick. The separate segment from north-northwest of Brunswick to Kingsland was redesignated as US 17/SR 25. Nearly the entire Sumter County portion of the Preston–Americus segment of SR 28, as well as the portion of US 341/SR 27 east of US 17/SR 25, had a "completed hard surface". A portion of US 341/SR 27 straddling the Wayne–Glynn county line had a "completed semi hard surface". Nearly the entire Dooly County portion of the Americus–Vienna segment of SR 28 had a "sand clay or top soil" surface. Four segments of US 341/SR 27 also had this type of surface: the entire Telfair County portion, nearly the entire Appling County portion of the Hazlehurst–Baxley segment, from Baxley to just east of the Appling–Wayne county line, and the northern part of the Jesup–Brunswick segment. A portion of SR 28 east-southeast of Preston, as well as nearly the entire Wayne County portion of the Baxley–Jesup and the central portion of Glynn County segments of US 341/SR 27, was under construction. By the end of 1929, US 341/SR 27 had a completed hard surface west-northwest of Jesup. East of Lumpkin and in the Preston area, SR 28 had a sand clay or top soil surface. Southeast of Baxley, US 341/SR 27 also had this type of surface. Three segments of US 341/SR 27 were under construction: from Hawkinsville to Eastman, from McRae to Lumber City, and the entire Appling County portion of the Hazlehurst–Baxley segment. Two segments of US 341/SR 27 had completed grading: nearly the entire Lumber City–Hazlehurst segment and nearly the entire Appling County portion of the Baxley–Jesup segment.

1930s

By the middle of 1930, SR 28 was extended northeast to Hawkinsville. The entire Glynn County portion of US 341/SR 27 had a completed hard surface. A portion of SR 28 east-southeast of Preston, as well as the McRae–Lumber City segment and Wayne County portion of the Baxley–Jesup segment of US 341/SR 27, had a sand clay or top soil surface. A portion of SR 28 west-northwest of Preston was under construction. By the end of the year, a portion of US 341/SR 27 east-southeast of Baxley had a sand clay or top soil surface. SR 28's segment between Richland and Preston, as well as the Dooly County portion of the Eastman–McRae segment of US 341/SR 27, and a portion of those highways northwest of the Wayne–Glynn county line, was under construction. By the end of 1931, US 280 was designated on SR 28 between Richland and Americus. Three segments of US 341/SR 27 had a completed hard surface: from Hawkinsville to Eastman, from northwest of McRae to Hazlehurst, and from east-southeast of Hazlehurst to Baxley. Two segments of those highways were under construction: from Eastman to northwest of McRae and a portion east-southeast of Hazlehurst. In April 1932, the Hazlehurst–Baxley segment of US 341/SR 27 had a completed hard surface. By the beginning of August, their segment between Eastman to McRae was also completed. In September, the Vienna–Hawkinsville segment of SR 28 had a sand clay or top soil surface. Late in 1934, the northern half of the Appling County portion of the Baxley–Jesup segment of US 341/SR 27, as well as a small portion east of the Appling–Wayne county line, had a completed hard surface. In the second quarter of 1935, two segments of US 341/SR 27 had a completed hard surface: from Baxley to just east of the Appling–Wayne county line and nearly the entire Wayne County portion of the Baxley–Jesup segment. A small portion east-southeast of the Appling–Wayne county line had completed grading, but was not surfaced. By the beginning of October, the entire Wayne County portion of the Baxley–Jesup segment had a completed hard surface. A portion just west of the Appling–Wayne county line was under construction. By the end of the year, from Baxley to a point southeast of Jesup, US 341/SR 27 had a completed hard surface. Near the end of the year, from Richland to just west of the Webster–Sumter county line, SR 28 was under construction. The year ended with two additional changes to SR 28. From northwest of Preston to east-southeast of it, the highway had a completed hard surface. From Richland to northwest of Preston, it had a sand clay or top soil surface. In the first quarter of 1937, a portion of SR 28 in the southwestern part of Hawkinsville had a completed hard surface. It was under construction from just east of the Dooly–Pulaski county line to southwest of Hawkinsville. In the third quarter of the year, the entire Jesup–Brunswick segment had a completed hard surface. At the end of the year, the entire length of SR 28 was redesignated as a western extension of SR 27. From the Dooly–Pulaski county line to southwest of Hawkinsville, the highway had completed grading, but was not surfaced. The western half of the Lumpkin–Richland segment was under construction. In 1938, from east-southeast of Preston to east of the Webster–Sumter county line, SR 27 was under construction. By the middle of 1939, US 25 was extended southward, onto the Jesup–Brunswick segment of US 341/SR 27. The western part of the Lumpkin–Richland segment had a completed hard surface, while the central part of it had completed grading, but was not surfaced. A portion east of Americus was under construction. In the third quarter of the year, this segment had completed grading, but was not surfaced. At the end of the year, a portion just west of the Dooly–Pulaski county line was under construction.

1940s to 1990s

In the first quarter of 1940, the entire Preston–Americus segment had a completed hard surface. In the third quarter of the year, the western half of the Quitman County portion of the Georgetown–Lumpkin segment was under construction. During the second half of the next year, a portion east-northeast of Vienna had a completed hard surface. The western half of the Quitman County portion of the Georgetown–Lumpkin segment had completed grading, but was not surfaced. The western part of the Webster County portion of the Richland–Preston segment was under construction. In 1942, from just east-northeast of Richland to Preston, the highway had a completed hard surface. Between the beginning of 1945 and November 1946, a portion from just west of Richland to Preston was hard surfaced. By February 1948, four segments were hard surfaced: from Georgetown to a point west-southwest of Lumpkin, the Lumpkin–Richland segment, a portion east-southeast of Americus, and the entire Pulaski County segment. Also, the eastern part of the Sumter County portion of the Americus–Vienna segment had a sand clay or top soil surface. By April 1949, the entire Georgetown–Lumpkin segment was hard surfaced. Between August 1950 and January 1952, the eastern half of the Dooly County portion of the Americus–Vienna segment was hard surfaced. In 1953, the entire Dooly County portion was hard surfaced. Between June 1955 and July 1957, the entire highway from Georgetown to Brunswick was paved. In 1972, SR 39 was extended northward on the westernmost portion of SR 27, as it travels today. Between the beginning of 1981 and the beginning of 1987, SR 782 was proposed between US 25/US 341/SR 27 and SR 27 Alt. In 1989, a southwestern bypass of Eastman, designated as SR 841, was proposed from US 341/SR 27 west of the city to US 23/US 341/SR 27 southeast of it. In 1993, US 341/SR 27 through Eastman was shifted southward out of the main part of the city onto the path of SR 841. Their former path was redesignated as US 341 Bus./SR 27 Bus. Between the beginning of 1987 and the beginning of 1997, US 23/US 341/SR 27 through Jesup was shifted northeast onto the path of SR 27 Alt. and SR 782

Major intersections

Special routes

Eastman business loop

State Route 27 Business is a business route of SR 27 that exists entirely within the central part of Dodge County. The route is almost entirely within the city limits of Eastman.
It begins just west of Eastman, at an intersection with US 341/SR 27.It travels to the northeast on Fish Road, concurrent with US 341 Bus./SR 46. Then, they curve to a due-east direction, onto Hawkinsville Highway. They enter the city limits of Eastman and curve to the southeast, onto Ogden Street. They turn left onto 5th Avenue and travel to the northeast. At an intersection with US 23/SR 87/SR 117, SR 46 departs the concurrency, and US 23/SR 87/SR 117 join it. At Griffin Street, SR 87/SR 117 departs the concurrency. The three highways continue to the southeast and intersect US 341/SR 27. Here, US 341 Bus. and SR 27 Bus. end, and US 23 joins the US 341/SR 27 concurrency.
SR 27 Bus. is not part of the National Highway System, a system of roadways important to the nation's economy, defense, and mobility.
In 1989, a southwestern bypass of Eastman, designated as SR 841, was proposed from US 341/SR 27 west of the city to US 23/US 341/SR 27 southeast of it. In 1993, US 341/SR 27 through Eastman was shifted southward out of the main part of the city onto the path of SR 841. Their former path was redesignated as US 341 Bus./SR 27 Bus.

McRae loop route

State Route 27 Loop was a loop route of SR 27 that existed in the north-central part of Telfair County. In 1977, it was established from US 23/US 341/SR 27 in Helena, through the northern part of Helena and McRae, to an intersection with US 23/US 341/SR 27 in McRae. In 1987, SR 27 Loop was decommissioned.

Jesup alternate route

State Route 27 Alternate was an alternate route of SR 27 that existed in the north-central part of Wayne County. It existed entirely within the city limits of Jesup. Between June 1960 and June 1963, it was established from US 23/US 341/SR 27 in the northwest part of the city to an intersection with US 23/US 25/US 301/US 341/SR 23/SR 27 in the southeastern part of the city. It had a sole segment and a southwestern one-block concurrency with US 25/US 301/SR 23. In 1989, US 23/US 341/SR 27 was shifted northeast, replacing nearly the entire length of SR 27 Alt.

Brunswick spur route

State Route 27 Spur was a spur route of SR 27 that existed in the south-central part of Glynn County and completely within the city limits of Brunswick. Between June 1963 and the end of 1965, it was established and hard surfaced on 1st Avenue, extending west-southwest from US 84/US 341/SR 27. In 1981, it was decommissioned.