Gold parting
Gold parting is the separating of gold from silver. Gold and silver are often extracted from the same ores and are chemically similar and therefore hard to separate. Over the centuries special means of separation have been invented.
The very earliest precious metals had mixes of gold and silver; gold and silver alloy is called electrum. With the advent of coinage, methods had to be invented to remove impurities from the gold so that gold of specific purities could be made. Cupellation was able to remove gold and silver from mixtures containing lead and other metals, but silver could not be removed. Gold parting as a process was specifically invented to remove the silver. The main ancient process of gold parting was by salt cementation and there is archaeological evidence of that process from the 6th century BC in Sardis, Lydia. In the post-medieval period parting using antimony, sulfates and mineral acids was also used. In the modern period chlorination using the Miller process, and electrolysis using the Wohlwill process are the most widely used methods of refining gold by removing silver and platinum. These latest processes have been employed for over 100 years. For some years now a new AcidLess Separation process, based on the vacuum distillation method, is being used; it is a physical method, which does not use any chemical and therefore it is considered the greenest of the gold parting processes.
History
Early history
The very earliest attempts at refining gold can be shown by the surface enhancement of gold rings. Gold quality was increased at the surface by 80–95% gold compared to 64–75% gold at the interior found in Nahal Qanah Cave dated to the 4th millennium BC. Further evidence is from three gold chisels from the 3rd Millennium BC royal cemetery at Ur that had a surface of high gold, low silver and copper compared with an interior of 45% gold, 10% silver and 45% copper. The surface was compacted and heavily burnished and indicates early use of depletion gilding.Ancient and medieval world
Separation of gold from silver was not practised in antiquity prior to the Lydian Period. Material from Sardis is evidence of the earliest use of gold and silver parting in the 6th century. Literary sources and the lack of physical evidence suggest that gold-silver parting was not practised before the mid first millennium BC. Gold parting came with the invention of coinage and there is no evidence for the use of a true refining processes before the introduction of coinage. As refining gold results in a noticeable loss in material, there would have been little reason to do this before the advent of coinage and the need to have a standard grade of material.The first possible literary reference to the salt cementation parting process is in the Arthashastra, a 4th-century BC treatise from India, that mentions heating of gold with Indus earth. Indus earth is taken to mean soils high in salt, nitre and ammonium salts and therefore ideal for the cementation parting process. A better known and more detailed early description is given by Diodorus Siculus in the 1st century BC quoting an earlier lost book, On the Erythraean Sea from the 2nd century BC by Agatharchides of Cnidus. An experiment recreating the process as described by Diodorus Siculus by heating a mixture of the gold and salt in a sealed pot for 5 days was done by Notton and was found to be successful.
Pliny in this Naturalis Historia mentions the purification of gold a number of times and makes reference to the salt cementation process of gold parting. He says that the gold is "roasted with a double weight of salt and three times the weight of misy and again with two portions of salt and one of the stone which is called schiston." Here he is describing the heating of gold with salt and iron sulfates which act to dissolve the copper and silver in the gold. Parting vessels used for refining gold with the cementation process have been found in London, Lincoln, York and Winchester. The London vessels, dating from the Flavian period, were sealed using luting clay; XRF analysis detected gold and silver, with highest concentration around the sealed region showing possible escape of silver as the volatile silver chloride.
Gold parting had been well used throughout the ancient times but only in the Medieval period were clear and detailed descriptions of the processes written. All the archaeological finds of Roman and early medieval parting point to a solid state process using common salt as the active ingredient. The only large group of medieval parting vessels so far discovered were found at Coppergate and Picadilly sites in York. The pinkish-purple discolouration of the vessels showed them to have been used with the salt cementation process which removes iron from the clay as ferric chloride. Other vessel fragments are known from Carlisle and Winchester. Theophilus was a 12th-century German monk and in his book De Diversus Artibus gives the clearest description of the salt cementation process.
This mixture is then added to an earthenware pot and layered with thin sheets of gold fold. The pot is then sealed and heated in a furnace.
It was during the medieval period that distillation was discovered and the first description of nitric acid production was given by Pseudo-Geber in the Summa perfectionis, 1330. Nitric acid is able to dissolve silver. The addition of sal ammoniac to nitric acid creates Aqua regia and this acid is able to dissolve gold. Both acids are used in the acid method of parting but the acids were expensive so were not used until the post medieval period.
Post medieval to Modern Period
Comprehensive accounts of the salt cementation processes is given by; Biringuccio in his The Method of cementing gold and of Bringing it to its Ultimate Fineness.; in the Probierbuchlein – Little Books on Assaying; by Georgius Agricola in book 10 of De Re Metallica; and by Ercker in his Treatise on ores and assaying. This was a period where new techniques began to be explored. Granulation of the gold instead of gold foil increased surface area and therefore the efficiency of the reaction. Salt cementation continued to be the main method of parting until the 16th century but in later Middle Ages processes using sulfur, antimony and mineral acids began to be used. There are archaeological finds at sites in London of distillation vessels for making acids in Britain from the 15th century which include fragments of ceramic cucurbits which were used with alembics for distillation. By the 18th century cementation was rarely used and had been replaced by acid treatment. Into modern times the acid parting method continued to be used but other methods were discovered. In 1860s Australia the Miller process was developed, this removed silver by bubbling chlorine gas through the molten gold mixture. Soon after, in the 1870s, Electrolytic refining of gold was developed, the Wohlwill process, to deal with the problem of removing platinum from the gold. This technique is the most commonly used today.New Technologies
Developed from 2012, with first installations of industrial plants from 2013; AcidLess Separation process introduces a chemical free and cost effective technology for the thermo-physic gold parting based on vacuum distillation, without any use of chemicals.The input of the plant are dorè bars or other feedstock, that after few hours on the AcidLess Separation gives in the output two or three separate products: a billet very rich in gold, a dry mud that contains impurities such as for example Lead, Zinc, Tin, Selenium and others.
All the output products are metallic, without moisture and chemical, and the process can cast the output product into anodes, bars, granulate or flakes.
AcidLess Separation machines are manufactured and commercialized by the Italian company IKOI SpA, and protected by international patents.
Published in 2014 in the scientific journal "Non-ferrous metals" no.2.2014, AcidLess Separation process has been presented to market for the first time in U.S.A. during the 38th IPMI Conference June 07,2014; published in 2015 in the LBMA magazine "Alchemist", issue no.79 October 2015, quoted by Prof. M.B. Mooinman in "Gold Ore Processing" 2nd Edition, Edited by Mike D. Adams, pag. 613, presented during 7th and 8th LBMA Assaying and Refining Conference in 2017 and in 2019 in London. Prof. M.B. Mooiman described AcidLess Separation technology in his speech at 8th LBMA Assaying and Refining Conference 2019 in London
Processes
Salt cementation
This process was used from Lydian to post-medieval times. It is a solid state process relying on common salt as the active ingredient but it is possible to use a mixture of saltpetre and green vitriol. The basic process involved the mixing of argentiferous gold foil, common salt and brick dust or burnt clay in a closed and sealed container. Theophilus mentions the addition of urine to the mix. With heating, the silver reacts with the salt to form silver chloride which is removed leaving a purified gold behind. Conditions needed for this process are below 1000 °C as the gold should not melt. Silver can be recovered by smelting the debris. Heating can take 24 hours. Hoover and Hoover explains the process thus: under heating salt decomposes in the presence of silica and alumina to produce hydrochloric acid and also some chlorine. This reacts with the silver to produce silver chloride. The urine is acidic and aids decomposition. Silver chloride is volatile and would be removed from the metal. And the container is sealed to stop the escape of the silver which can be recovered later. Notton in experiments found that with one heating the gold content could be taken from 37.5% to 93%Sulfur and antimony processes
This is similar to the salt cementation process but creates sulfides instead of chlorides. Finely divided impure gold and elemental sulfur are reacted together under moderate heat in a sealed crucible. The impurities form metal sulfides and the gold is left unreacted. The gaseous sulfide condenses on the crucible fabric. The antimony process is the same but uses stibnite instead of sulfur because stibnite is stable at a higher temperature than sulfur. This is much quicker than the salt process and gave a purer gold, but it could dissolve some of the gold as well. This process is first described in the Probierbuchlein.Acid parting
The distillation was used in the 12th century Europe after its introduction from the East and after that period more powerful acids could be created. Nitric acid could be made by the distillation of saltpetre with alum or vitriol with water.2KNO3 + H2O + FeSO4 → FeO + K2SO4 + 2HNO3
Nitric acid, after distillation to increase the acid strength, is capable of dissolving the silver but it will not dissolve the gold. However, nitric acid is not able to extract silver and other impurities from an alloy with a high content of gold. Therefore, one part of scrap gold was typically alloyed with three parts of copper before parting with nitric acid. Another method uses Sterling silver instead of copper. One part pure gold is alloyed with three parts Sterling silver. The resulting six karat gold can then be parted with dilute nitric acid. With the karat gold this low, and over medium high heat, the dilute nitric acid will dissolve the Sterling silver starting on the outside surface of the 6K gold alloy, working its way into the gold alloy, forming a honeycomb structure as it works its way into the metals. Since nitric acid will not dissolve gold, nearly pure gold will be left behind after the reaction is complete. After removing the solid gold other elements like silver and copper may be extracted from the liquid. To get the gold to a very high level of purity it is sometimes processed further with aqua regia to effectively remove all the impurities.
Aqua regia was also used for parting. It was made by adding sal ammoniac to nitric acid which produced a mixture of hydrochloric acid and nitric acid. This acid dissolved the gold to a soluble chloride and the silver was attacked and precipitated as an insoluble chloride. Silver was removed by filtering and gold was then recovered by evaporating the liquid and heating the residue. Nitric acid was suitable for separating small quantities of gold from silver and Aqua regia used to separate small quantities of silver from gold. Aqua regia acid process is used by refiners of scrap gold used in jewelry manufacturing. This process is also well suited to recycling consumers' used or broken jewelry directly back onto the global market 24kt inventory.