Iron pentacarbonyl


Iron pentacarbonyl, also known as iron carbonyl, is the compound with formula 5. Under standard conditions Fe5 is a free-flowing, straw-colored liquid with a pungent odour. Older samples appear darker. This compound is a common precursor to diverse iron compounds, including many that are useful in small scale organic synthesis.

Properties

Iron pentacarbonyl is a homoleptic metal carbonyl, where carbon monoxide is the only ligand complexed with a metal. Other examples include octahedral Cr6 and tetrahedral Ni4. Most metal carbonyls have 18 valence electrons, and Fe5 fits this pattern with 8 valence electrons on Fe and five pairs of electrons provided by the CO ligands. Reflecting its symmetrical structure and charge neutrality, Fe5 is volatile; it is one of the most frequently encountered liquid metal complexes. Fe5 adopts a trigonal bipyramidal structure with the Fe atom surrounded by five CO ligands: three in equatorial positions and two axially bound. The Fe–C–O linkages are each linear.
Fe5 exhibits a relatively low rate of interchange between the axial and equatorial CO groups via the Berry mechanism. It is characterized by two intense νCO bands in the IR spectrum at 2034 and 2014 cm−1.

Synthesis and other iron carbonyls

Fe5 is produced by the reaction of fine iron particles with carbon monoxide. The compound was described in a journal by Mond and Langer in 1891 as "a somewhat viscous liquid of a pale-yellow colour." Samples were prepared by treatment of finely divided, oxide-free iron powder with carbon monoxide at room temperature.
Industrial synthesis of the compound requires relatively high temperatures and pressures as well as special, chemically resistant equipment. Preparation of the compound at the laboratory scale avoids these complications by using an iodide intermediate:
  1. FeI2 + 4 CO → Fe4I2
  2. 5 Fe4I2 + 10 Cu → 10 CuI + 4 Fe5 + Fe
Fe5 is sensitive to light. Photodissociation of Fe5 produces Fe29, a yellow-orange solid, also described by Mond. When heated, Fe5 converts to small amounts of the metal cluster Fe312, a green solid. Simple thermolysis, however, is not a useful synthesis, and each iron carbonyl complex exhibits distinct reactivity.

Industrial production and use

The industrial production of this compound is somewhat similar to the Mond process in that the metal is treated with carbon monoxide to give a volatile gas. In the case of iron pentacarbonyl, the reaction is more sluggish. It is necessary to use iron sponge as the starting material, and harsher reaction conditions of 5–30 MPa of carbon monoxide and 150–200 °C. Similar to the Mond process, sulfur acts as a catalyst. The crude iron pentacarbonyl is purified by distillation. Ullmann's Encyclopedia of Industrial Chemistry reports that there are only three plants manufacturing pentacarbonyliron; BASF in Germany and GAF in Alabama have capacities of 9000 and 1500–2000 tonnes/year respectively.
Most iron pentacarbonyl produced is decomposed on site to give pure carbonyl iron in analogy to carbonyl nickel. Some iron pentacarbonyl is burned to give pure iron oxide. Other uses of pentacarbonyliron are small in comparison.

Reactions

Decarbonylation

Purified iron pentacarbonyl can be decomposed to produce carbonyl iron, a high-purity preparation of iron metal.

CO substitution reactions

Many compounds are derived from Fe5 by substitution of CO by Lewis bases, L, to give derivatives Fe5−xLx. Common Lewis bases include isocyanides, tertiary phosphines and arsines, and alkenes. Usually these ligands displace only one or two CO ligands, but certain acceptor ligands such as PF3 and isocyanides can proceed to tetra- and pentasubstitution. These reactions are often induced with a catalyst or light. Illustrative is the synthesis of the bis complex Fe32. This transformation can be accomplished photochemically, but it is also induced by the addition of NaOH or NaBH4. The catalyst attacks a CO ligand, which labilizes another CO ligand toward substitution. The electrophilicity of Fe4L is less than that of Fe5, so the nucleophilic catalyst, disengages and attacks another molecule of Fe5.

Oxidation and reduction

Most metal carbonyls can be halogenated. Thus, treatment of Fe5 with halogens gives the ferrous halides Fe4X2 for X = I, Br, Cl. These species, upon heating lose CO to give the ferrous halides, such as iron chloride.
Reduction of Fe5 with Na gives Na2Fe4, "tetracarbonylferrate" also called Collman's reagent. The dianion is isoelectronic with Ni4 but highly nucleophilic.

Acid-base reactions

Fe5 is not readily protonated, but it is attacked by hydroxide. Treatment of Fe5 with aqueous base produces −, via the Metallacarboxylate intermediate. The oxidation of this monoanion gives triiron dodecarbonyl, Fe312. Acidification of solutions of − gives iron tetracarbonyl hydride, H2Fe4, the first metal hydride ever reported.

Diene adducts

Dienes react with Fe5 to give Fe3, wherein two CO ligands have been replaced by two olefins. Many dienes undergo this reaction, notably norbornadiene and 1,3-butadiene. One of the more historically significant derivatives is cyclobutadieneiron tricarbonyl Fe3, where C4H4 is the otherwise unstable cyclobutadiene. Receiving the greatest attention are complexes of the cyclohexadienes, the parent organic 1,4-dienes being available through the Birch reductions. 1,4-Dienes isomerize to the 1,3-dienes upon complexation.
Fe5 reacts in dicyclopentadiene to form 2, cyclopentadienyliron dicarbonyl dimer. This compound, called "Fp dimer" can be considered a hybrid of ferrocene and Fe5, although in terms of its reactivity, it resembles neither.

Other uses

In Europe, iron pentacarbonyl was once used as an anti-knock agent in petrol in place of tetraethyllead. Two more modern alternative fuel additives are ferrocene and methylcyclopentadienyl manganese tricarbonyl. Fe5 is used in the production of "carbonyl iron", a finely divided form of Fe, a material used in magnetic cores of high-frequency coils for radios and televisions and for manufacture of the active ingredients of some radar absorbent materials. It is famous as a chemical precursor for the synthesis of various iron-based nanoparticles.
Iron pentacarbonyl has been found to be a strong flame speed inhibitor in oxygen based flames. A few hundred ppm of iron pentacarbonyl are known to reduce the flame speed of stoichiometric methane–air flame by almost 50%. However due to its toxic nature it has not been used widely as a flame retardant.

Toxicity and hazards

Fe5 is toxic, which is of concern because of its volatility. If inhaled, iron pentacarbonyl may cause lung irritation, toxic pneumonitis, or pulmonary edema. Like other metal carbonyls, Fe5 is flammable. It is, however, considerably less toxic than nickel tetracarbonyl.
In regards to occupational exposures to iron pentacarbonyl, the National Institute for Occupational Safety and Health has set a recommended exposure limit at 0.1 ppm over an eight-hour time-weighted average, and a short-term exposure limit at 0.2 ppm.