Kalka–Shimla railway


The Kalka–Shimla railway is a narrow-gauge railway in North India which traverses a mostly-mountainous route from Kalka to Shimla. It is known for dramatic views of the hills and surrounding villages. The railway was built under the direction of Herbert Septimus Harington between 1898 and 1903 to connect Shimla, the summer capital of India during the British Raj, with the rest of the Indian rail system.
Its early locomotives were manufactured by Sharp, Stewart and Company. Larger locomotives were introduced, which were manufactured by the Hunslet Engine Company. Diesel and diesel-hydraulic locomotives began operation in 1955 and 1970, respectively.
On 8 July 2008, UNESCO added the Kalka–Shimla railway to the mountain railways of India World Heritage Site.

History

Shimla, which was settled by the British shortly after the first Anglo-Gurkha war, is located at in the foothills of the Himalayas.
The idea of connecting Shimla by rail was first raised by a correspondent to the Delhi gazette in November 1847.
Shimla became the summer capital of British India in 1864, and was the headquarters of the Indian army. This meant that twice a year it was necessary to transfer the entire government between Calcutta and Shimla by horse and ox drawn carts.
In 1891 the broad-gauge Delhi–Kalka line opened, which made the construction of a branch line up to Shimla feasible.
The earliest survey was made in 1884 followed by another survey in 1885. Based on these two surveys, a project report was submitted in 1887 to the government of British India. Fresh surveys were made in 1892, and 1893 which lead to four alternate schemes being suggested - two adhesion lines and long and two rack lines. Fresh surveys were again made in 1895 from Kalka to Solan with a view to determine whether a 1 in 12 rack or 1 in 25 adhesion line should be chosen. After much debate an adhesion line was chosen in preference to a rack system.
Construction of the Kalka–Shimla railway on narrow-gauge tracks was begun by the privately funded Delhi-Ambala-Kalka Railway Company following the signing of a contract between the secretary of state and the company on 29 June 1898. The contract specified that the line would be built without any financial aid or guarantee from the government. The government however provided the land free of charge to the company. The estimated cost of 8,678,500 rupees doubled by the time the line was opened. The Chief Engineer of the project was Herbert Septimus Harington.
The line opened for traffic on 9 November 1903 and was dedicated by Viceroy Lord Curzon.
This line was further extended from Shimla to Shimla Goods on 27 June 1909 making it.
The Indian Army were sceptical about the two feet gauge chosen for the line and requested that a wider standard gauge be used for mountain and light strategic railways. Eventually the government agreed that the gauge was too narrow for was essentially a capital city and for military purposes. As a result, the contract with the railway company was revised on 15 November 1901 and the line gauge changed to with the track built to date being regauged. Some sources however state the regauging wasn't undertaken until 1905.
In 1905 the company took delivery of a 10-ton Cowans Sheldon travelling crane to assist with lifting rolling stock back onto the tracks after accidents and for general track maintenance.
Due to the high capital and maintenance costs and difficult working conditions, the railway was allowed to charge higher fares than on other lines. Nevertheless, the company had spent 16,525,000 rupees by 1904 with no sign of the line becoming profitable, which lead to it being purchased by the government on 1 January 1906 for 17,107,748 rupees.
Once it came under the control of the government the line was originally managed as an independent unit from the North West Railway office in Lahore until 1926, when it was transferred to Delhi Division. Since July 1987, the line has been managed by the Ambala Division from Ambala Cantt.
In 2007, the Himachal Pradesh government declared the railway a heritage property. For about a week, beginning on 11 September 2007, a UNESCO team visited the railway to inspect it for possible selection as a World Heritage Site. On 8 July 2008, it became part of the mountain railways of India World Heritage Site with the Darjeeling Himalayan and Nilgiri Mountain Railways.
On 7 July 2011 Indian Railways opened the Baba Bhalku Rail Museum in Shimla to document the history of the railway line and to display related artefacts.

Technical details

The track has 20 picturesque stations, 103 tunnels, 912 curves, 969 bridges and 3% slope. The 1,143.61 m Bagot tunnel at Barog immediately before the Barog station is longest, a 60 ft bridge is the longest and the sharpest curve has a 123 ft radius of curvature. The railway line originally used rail, which was later replaced with rail. The train has an average speed of 25–30 km/hr but the railcar is almost 50–60 km/hr. Both the train and railcar are equipped with vistadomes.
The temperature range and annual rainfall are 0–45 C and 200–250 cm respectively.

Operators

The KSR and its assets, including the stations, line and vehicles, belong to the government of India under the Ministry of Railways. The Northern Railway handles day-to-day maintenance and management, and several programs, divisions and departments of Indian Railways are responsible for repairs.

Route

The route winds from a height of at Kalka in the Himalayan Shivalik Hills foothills, past Dharampur, Solan, Kandaghat, Taradevi, Barog, Salogra, Totu and Summerhill, to Shimla at an altitude of.
The difference in height between the two ends of line is.

Stations

Bridges and viaducts

The railway has 988 bridges and viaducts and a ruling gradient of 1 in 33, or three percent. It has 917 curves, and the sharpest is 48 degrees.
The most architecturally complex bridge is No. 226 which spans a deep valley which required that it had to be constructed in five stages with each level having its own stone arched tier.

Tunnels

One hundred seven tunnels were originally built, but as a result of landslides only 102 remain in use.

Rolling stock

The first locomotives were two class-B 0-4-0STs from the Darjeeling Himalayan Railway. These were built as -gauge engines, but were converted to -gauge in 1901. They were not large enough, and were followed in 1902 by 10 slightly-larger engines with a 0-4-2T wheel arrangement. The locomotives weighed each, and had driving wheels and cylinders. Later classified as B-class by the North Western State Railway, they were manufactured by the British Sharp, Stewart and Company.
Thirty larger 2-6-2T locomotives, with slight variations, were introduced between 1904 and 1910. Built by the Hunslet Engine and North British Locomotive Companies, they weighed about and had drivers and cylinders. Later classed K and K2 by the North Western State Railway, they handled most of the rail traffic during the steam era. A pair of Kitson-Meyer 2-6-2+2-6-2 articulated locomotives, classed TD, were supplied in 1928. However, they quickly fell into disfavour because it often took all day for enough freight to be assembled to justify operating a goods train hauled by one of these locomotives. Shippers looking for faster service began turning to road transport. These locomotives were soon transferred to the Kangra Valley Railway, and were converted to in Pakistan. Regular steam-locomotive operation ended in 1971.
The railway's first diesel locomotives, class ZDM-1 manufactured by Arnold Jung Lokomotivfabrik, began operating in 1955; they were regauged, reclassified as NDM-1 and used on the Matheran Hill Railway during the 1970s. In the 1960s, class ZDM-2 locomotives from Maschinenbau Kiel was introduced; they were later transferred to other lines.
The KSR currently operates with class ZDM-3 diesel-hydraulic locomotives, built between 1970 and 1982 by Chittaranjan Locomotive Works with a single-cab road-switcher body. Six locomotives of that class were built in 2008 and 2009 by the Central Railway Loco Workshop in Parel, with updated components and a dual-cab body providing better track vision.
The railway opened with conventional four-wheel and bogie coaches. Their tare weight meant that only four bogie coaches could be hauled by the 2-6-2T locomotives. In a 1908 effort to increase capacity, the coach stock was rebuilt as bogie coaches with steel frames and bodies. To further save weight, the roofs were made of aluminium. The weight savings meant that the locomotives could now haul six of the larger coaches. This was an early example of the use of aluminium in coach construction to reduce tare weight.
Goods rolling stock was constructed on a common pressed-steel underframe. Open and covered wagons were provided, with the open wagons having a capacity of and the covered wagons.
During the winter months snow cutters are attached to the engine to clear the snow from the track.

Trains

televised Indian Hill Railways, a series of three programmes which featured the KSR in its third episode, in February 2010; the first two episodes covered the Darjeeling Himalayan Railway and Nilgiri Mountain Railway. The episodes, directed by Tarun Bhartiya, Hugo Smith and Nick Mattingly respectively, were produced by Gerry Troyna. Indian Hill Railways won a Royal Television Society award in June 2010. The KSR also featured in the Punjab episode of CNN's .
In 2018, the KSR was featured in an episode of the BBC Two programme Great Indian Railway Journeys.