List of International Organization for Standardization standards, 8000-8999

ISO 8000 – ISO 8999

• ISO 8000 Data quality
• ISO 8002:1986 Mechanical vibrations – Land vehicles – Method for reporting measured data
• ISO 8015:2011 Geometrical product specifications – Fundamentals – Concepts, principles and rules
• ISO 8041:2005 Human response to vibration - Measuring instrumentation
• * ISO 8041-1:2017 Part 1: General purpose vibration meters
• ISO 8042:1988 Shock and vibration measurements – Characteristics to be specified for seismic pick-ups
• ISO 8044:2015 Corrosion of metals and alloys – Basic terms and definitions
• ISO 8048:1984 Technical drawings – Construction drawings – Representation of views, sections and cuts
• ISO 8049:2016 Ferronickel shot - Sampling for analysis
• ISO 8050:1988 Ferronickel ingots or pieces - Sampling for analysis
• ISO 8062 Geometrical product specifications - Dimensional and geometrical tolerances for moulded parts
• * ISO 8062-1:2007 Part 1: Vocabulary
• * ISO/TS 8062-2:2013 Part 2: Rules
• * ISO 8062-3:2007 Part 3: General dimensional and geometrical tolerances and machining allowances for castings
• * ISO 8062-4:2017 Part 4: General tolerances for castings using profile tolerancing in a general datum system
• ISO 8063 Information processing – Data interchange on 6,30 mm wide magnetic tape cartridge using IMFM recording at 252 ftpmm
• * ISO 8063-1:1986 Part 1: Mechanical, physical and magnetic properties
• * ISO 8063-2:1986 Part 2: Track format and method of recording for data interchange in start/stop mode
• ISO 8064:1985 Information processing – Reels for 12,7 mm wide magnetic tapes – Sizes 16, 18 and 22
• ISO/IEC 8072:1996 Information technology – Open systems interconnection – Transport service definition
• ISO/IEC 8073:1997 Information technology – Open Systems Interconnection – Protocol for providing the connection-mode transport service
• ISO 8088:1994 Equipment for olive cultivation and olive oil production – Vocabulary
• ISO 8090:1990 Cycles – Terminology
• ISO 8107:1993 Nuclear power plants - Maintainability - Terminology
• ISO 8109:1990 Banking and related financial services – Securities – Format of Eurobonds
• ISO 8114:1990 Textile machinery and accessories – Spindles for ring-spinning and doubling machines – List of equivalent terms
• ISO 8116 Textile machinery and accessories – Beams for winding
• * ISO 8116-1:1995 Part 1: General vocabulary
• ISO 8119 Textile machinery and accessories – Needles for knitting machines – Terminology
• * ISO 8119-1:1989 Part 1: Latch-type needles
• * ISO 8119-2:1989 Part 2: Bearded needles
• * ISO 8119-3:1992 Part 3: Compound needles
• ISO 8147:1995 Shipbuilding and marine structures – Derrick rigs and component parts – Vocabulary
• ISO 8152:1984 Earth-moving machinery – Operation and maintenance – Training of mechanics
• ISO 8153 Aerospace fluid systems and components – Vocabulary
• * ISO 8153-1:2009 Part 1: Hose assemblies
• ISO 8157:2015 Fertilizers and soil conditioners – Vocabulary
• ISO 8159:1987 Textiles – Morphology of fibres and yarns – Vocabulary
• ISO 8160:1987 Textiles – Textured filament yarns – Vocabulary
• ISO 8178 Reciprocating internal combustion engines - Exhaust emission measurement
• ISO 8180 Ductile iron pipelines – Polyethylene sleeving for site application
• ISO 8199:2005 Water quality – General guidance on the enumeration of micro-organisms by culture
• ISO/IEC 8208:2000 Information technology – Data communications – X.25 Packet Layer Protocol for Data Terminal Equipment
• ISO/IEC 8211:1994 Information technology - Specification for a data descriptive file for information interchange
• ISO 8217:2017 Petroleum products - Fuels - Specifications of marine fuels
• ISO 8229:1991 Operations and baths relating to dry-cleaning machines – Vocabulary
• ISO 8277:2013 Ships and marine technology – Pipework and machinery – Information transfer
• ISO 8297:1994 Acoustics – Determination of sound power levels of multisource industrial plants for evaluation of sound pressure levels in the environment – Engineering method
• ISO 8316:1987 Measurement of liquid flow in closed conduits – Method by collection of the liquid in a volumetric tank
• ISO 8317:2015 Child-resistant packaging - Requirements and testing procedures for reclosable packages
• ISO 8319 Orthopaedic instruments – Drive connections
• * ISO 8319-1:1996 Part 1: Keys for use with screws with hexagon socket heads
• * ISO 8319-2:1986 Part 2: Screwdrivers for single slot head screws, screws with cruciate slot and cross-recessed head screws
• ISO/IEC 8326:1996 Information technology – Open Systems Interconnection – Session service definition
• ISO/IEC 8327 Information technology – Open Systems Interconnection – Connection-oriented Session protocol
• * ISO/IEC 8327-1:1996 Protocol specification
• * ISO/IEC 8327-2:1996 Protocol Implementation Conformance Statement proforma
• ISO 8330:2014 Rubber and plastics hoses and hose assemblies - Vocabulary
• ISO 8333:1985 Liquid flow measurement in open channels by weirs and flumes – V-shaped broad-crested weirs
• ISO 8343:1985 Ferronickel - Determination of silicon content - Gravimetric method
• ISO/IEC 8348:2002 Information technology – Open Systems Interconnection – Network service definition
• ISO 8362 Injection containers and accessories
• * ISO 8362-1:2009 Part 1: Injection vials made of glass tubing
• * ISO 8362-2:2015 Part 2: Closures for injection vials
• * ISO 8362-3:2001 Part 3: Aluminium caps for injection vials
• * ISO 8362-4:2011 Part 4: Injection vials made of moulded glass
• * ISO 8362-5:2016 Part 5: Freeze drying closures for injection vials
• * ISO 8362-6:2010 Part 6: Caps made of aluminium-plastics combinations for injection vials
• * ISO 8362-7:2006 Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part
• ISO 8368:1999 Hydrometric determinations – Flow measurements in open channels using structures – Guidelines for selection of structure
• ISO 8373:2012 Manipulating industrial robots – Vocabulary
• ISO 8378 Information processing – Data interchange on 130 mm flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad, 3,8 tpmm, on both sides
• * ISO 8378-1:1986 Part 1: Dimensional, physical and magnetic characteristics
• * ISO 8378-2:1986 Part 2: Track format A
• * ISO 8378-3:1986 Part 3: Track format B
• ISO 8384:2000 Ships and marine technology – Dredgers – Vocabulary
• ISO 8388:1998 Knitted fabrics – Types – Vocabulary
• ISO 8421 Fire protection - Vocabulary
• * ISO 8421-1:1987 Part 1: General terms and phenomena of fire
• * ISO 8421-2:1987 Part 2: Structural fire protection
• * ISO 8421-6:1987 Part 6: Evacuation and means of escape
• * ISO 8421-7:1987 Part 7: Explosion detection and suppression means
• ISO 8422:2006 Sequential sampling plans for inspection by attributes
• ISO 8423:2008 Sequential sampling plans for inspection by variables for percent nonconforming
• ISO 8429:1986 Optics and optical instruments – Ophthalmology – Graduated dial scale
• ISO 8439:1990 Forms design - Basic layout
• ISO 8440:1986 Location of codes in trade documents
• ISO/IEC 8441 Information technology – High density digital recording
• * ISO/IEC 8441-1:1991 Part 1: Unrecorded magnetic tape for applications
• * ISO/IEC 8441-2:1991 Part 2: Guide for interchange practice
• ISO 8459:2009 Information and documentation - Bibliographic data element directory for use in data exchange and enquiry
• ISO 8462 Information processing – Data interchange on 6,30 mm magnetic tape cartridge using GCR recording at 394 ftpmm, 39 cpmm
• * ISO 8462-1:1986 Part 1: Mechanical, physical and magnetic properties
• * ISO 8462-2:1986 Part 2: Streaming mode
• ISO/IEC 8473 Information technology – Protocol for providing the connectionless-mode network service
• * ISO/IEC 8473-1:1998 Protocol specification
• * ISO/IEC 8473-2:1996 Part 2: Provision of the underlying service by an ISO/IEC 8802 subnetwork
• * ISO/IEC 8473-3:1995 Provision of the underlying service by an X.25 subnetwork
• * ISO/IEC 8473-4:1995 Provision of the underlying service by a subnetwork that provides the OSI data link service
• * ISO/IEC 8473-5:1997 Provision of the underlying service by ISDN circuit-switched B-channels
• ISO/IEC 8480:1995 Information technology – Telecommunications and information exchange between systems – DTE/DCE interface back-up control operation using ITU-T Recommendation V.24 interchange circuits
• ISO/IEC 8481:1996 Information technology – Telecommunications and information exchange between systems – DTE to DTE direct connections
• ISO/IEC 8482:1993 Information technology – Telecommunications and information exchange between systems – Twisted pair multipoint interconnections
• ISO/IEC 8484:2014 Information technology – Magnetic stripes on savingsbooks
• ISO 8485:1989 Programming languages - APL
• ISO 8498:1990 Woven fabrics – Description of defects – Vocabulary
• ISO 8499:2003 Knitted fabrics – Description of defects – Vocabulary
• ISO 8501 Preparation of steel substrates before application of paints and related products – Visual assessment of surface cleanliness
• * ISO 8501-1:2007 Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
• * ISO 8501-2:1994 Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings
• * ISO 8501-3:2006 Part 3: Preparation grades of welds, edges and other areas with surface imperfections
• * ISO 8501-4:2006 Part 4: Initial surface conditions, preparation grades and flash rust grades in connection with high-pressure water jetting
• ISO 8502 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness
• * ISO 8502-2:2017 Part 2: Laboratory determination of chloride on cleaned surfaces
• * ISO 8502-3:2017 Part 3: Assessment of dust on steel surfaces prepared for painting
• * ISO 8502-4:2017 Part 4: Guidance on the estimation of the probability of condensation prior to paint application
• * ISO 8502-5:1998 Part 5: Measurement of chloride on steel surfaces prepared for painting
• ISO 8553:2004 Milk – Enumeration of microorganisms – Plate-loop technique at 30 degrees C
• ISO 8559:1989 Garment construction and anthropometric surveys – Body dimensions
• ISO 8559 Size designation of clothes
• * ISO 8559-1:2017 Part 1: Anthropometric definitions for body measurement
• * ISO 8559-2:2017 Part 2: Primary and secondary dimension indicators
• ISO 8560:1986 Technical drawings – Construction drawings – Representation of modular sizes, lines and grids
• ISO 8568:2007 Mechanical shock – Testing machines – Characteristics and performance
• ISO 8571 Information processing systems - Open Systems Interconnection - File Transfer, Access and Management
• * ISO 8571-1:1988 Part 1: General introduction
• * ISO 8571-2:1988 Part 2: Virtual Filestore Definition
• * ISO 8571-3:1988 Part 3: File Service Definition
• * ISO 8571-4:1988 Part 4: File Protocol Specification
• * ISO/IEC 8571-5:1990 Part 5: Protocol Implementation Conformance Statement Proforma
• ISO 8573 Compressed air
• * ISO 8573-1:2010 Contaminants and purity classes
• * ISO 8573-2:2007 Test methods for oil aerosol content
• * ISO 8573-3:1999 Test methods for measurement of humidity
• * ISO 8573-4:2001 Test methods for solid particle content
• * ISO 8573-5:2001 Test methods for oil vapour and organic solvent content
• * ISO 8573-6:2003 Test methods for gaseous contaminant content
• * ISO 8573-7:2003 Test method for viable microbiological contaminant content
• * ISO 8573-8:2004 Test methods for solid particle content by mass concentration
• * ISO 8573-9:2004 Test methods for liquid water content
• ISO 8579 Acceptance code for gear units
• * ISO 8579-1:2002 Part 1: Test code for airborne sound
• ISO 8583 Financial transaction card originated messages – Interchange message specifications
• ISO 8586:2012 Sensory analysis – General guidelines for the selection, training and monitoring of selected assessors and expert sensory assessors
• ISO 8596:2009 Ophthalmic optics – Visual acuity testing – Standard optotype and its presentation
• ISO 8598 Optics and optical instruments – Focimeters
• * ISO 8598-1:2014 Part 1: General purpose instruments
• ISO 8600 Endoscopes – Medical endoscopes and endotherapy devices
• * ISO 8600-1:2015 Part 1: General requirements
• * ISO 8600-2:2015 Part 2: Particular requirements for rigid bronchoscopes
• * ISO 8600-3:1997 Part 3: Determination of field of view and direction of view of endoscopes with optics
• * ISO 8600-4:2014 Part 4: Determination of maximum width of insertion portion
• * ISO 8600-5:2005 Part 5: Determination of optical resolution of rigid endoscopes with optics
• * ISO 8600-6:2005 Part 6: Vocabulary
• * ISO 8600-7:2012 Part 7: Basic requirements for medical endoscopes of water-resistant type
• ISO 8601:2004 Data elements and interchange formats – Information interchange – Representation of dates and times
• ISO/IEC 8602:1995 Information technology – Protocol for providing the OSI connectionless-mode transport service
• ISO 8604:1988 Plastics – Prepregs – Definitions of terms and symbols for designations
• ISO 8608:2016 Mechanical vibration – Road surface profiles – Reporting of measured data
• ISO 8612:2009 Ophthalmic instruments – Tonometers
• ISO/IEC 8613 Information technology – Open Document Architecture and interchange format
• ISO 8614:1997 Ski bindings – Vocabulary
• ISO 8615:1991 Implants for surgery – Fixation devices for use in the ends of the femur in adults
• ISO 8624:2011 Ophthalmic optics – Spectacle frames – Measuring system and terminology
• ISO 8625 Aerospace – Fluid systems – Vocabulary
• * ISO 8625-1:1993 Part 1: General terms and definitions related to pressure
• * ISO 8625-2:1991 Part 2: General terms and definitions relating to flow
• * ISO 8625-3:1991 Part 3: General terms and definitions relating to temperature
• * ISO 8625-4:2011 Part 4: General terms and definitions relating to control/actuation systems
• ISO 8626:1989 Servo-hydraulic test equipment for generating vibration – Method of describing characteristics
• ISO 8630 Information processing – Data interchange on 130 mm flexible disk cartridges using modified frequency modulation recording at 13 262 ftprad, on 80 tracks on each side
• * ISO 8630-1:1987 Part 1: Dimensional, physical and magnetic characteristics
• * ISO 8630-2:1987 Part 2: Track format A for 77 tracks
• * ISO 8630-3:1987 Part 3: Track format B for 80 tracks
• ISO/IEC 8631:1989 Information technology - Program constructs and conventions for their representation
• ISO/IEC 8632 Information technology – Computer graphics – Metafile for the storage and transfer of picture description information
• * ISO/IEC 8632-1:1999 Part 1: Functional specification
• * ISO/IEC 8632-2:1992 Part 2: Character encoding
• * ISO/IEC 8632-3:1999 Part 3: Binary encoding
• * ISO/IEC 8632-4:1999 Part 4: Clear text encoding
• ISO 8637:2010 Cardiovascular implants and extracorporeal systems – Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators
• ISO 8638:2010 Cardiovascular implants and extracorporeal systems – Extracorporeal blood circuit for haemodialysers, haemodiafilters and haemofilters
• ISO 8640 Textile machinery and accessories – Flat warp knitting machines
• * ISO 8640-1:2004 Part 1: Vocabulary of basic structure and knitting elements
• * ISO 8640-2:2004 Part 2: Vocabulary of warp let-off, fabric take-up and batching
• * ISO 8640-3:2002 Part 3: Vocabulary of patterning devices
• * ISO 8640-4:1996 Part 4: Stitch bonding machines and stitch bonding devices
• ISO 8648:1988 Information processing systems – Open Systems Interconnection – Internal organization of the Network Layer
• ISO/IEC 8650 Information technology – Open Systems Interconnection – Protocol specification for the Association Control Service Element
• * ISO/IEC 8650-2:1997 Protocol Implementation Conformance Statement proforma
• ISO 8651 Information technology – Computer graphics – Graphical Kernel System language bindings
• * ISO 8651-1:1988 Part 1: FORTRAN
• * ISO 8651-2:1988 Part 2: Pascal
• * ISO 8651-3:1988 Part 3: Ada
• * ISO/IEC 8651-4:1995 Part 4: C
• ISO/IEC 8652:2012 Information technology – Programming languages – Ada
• ISO 8653:1986 Jewellery – Ring-sizes – Definition, measurement and designation
• ISO 8655 Piston-operated volumetric apparatus
• * ISO 8655-1:2002 Part 1: Terminology, general requirements and user recommendations
• * ISO 8655-2:2002 Part 2: Piston pipettes
• * ISO 8655-3:2002 Part 3: Piston burettes
• * ISO 8655-4:2002 Part 4: Dilutors
• * ISO 8655-5:2002 Part 5: Dispensers
• * ISO 8655-6:2002 Part 6: Gravimetric methods for the determination of measurement error
• * ISO 8655-7:2005 Part 7: Non-gravimetric methods for the assessment of equipment performance
• ISO 8669 Urine collection bags
• * ISO 8669-1:1988 Part 1: Vocabulary
• ISO 8670 Ostomy collection bags
• * ISO 8670-1:1988 Part 1: Vocabulary
• ISO 8691 Petroleum products – Low levels of vanadium in liquid fuels – Determination by flameless atomic absorption spectrometry after ashing
• ISO 8695:2010 Tools for pressing - Punches - Nomenclature and terminology
• ISO/TR 8713:2012 Electrically propelled road vehicles – Vocabulary
• ISO 8769:2016 Reference sources - Calibration of surface contamination monitors - Alpha-, beta- and photon emitters
• ISO 8777:1993 Information and documentation - Commands for interactive text searching
• ISO 8784 Pulp, paper and board – Microbiological examination
• * ISO 8784-1:2014 Part 1: Enumeration of bacteria and bacterial spores based on disintegration
• ISO 8785:1998 Geometrical Product Specification - Surface imperfections - Terms, definitions and parameters
• ISO 8790:1987 Information processing systems - Computer system configuration diagram symbols and conventions
• ISO/IEC 8802 Information technology – Telecommunications and information exchange between systems – Local and metropolitan area networks – Specific requirements
• * ISO/IEC/IEEE 8802-A:2015 Part A: Overview and architecture
• * ISO/IEC TR 8802-1:2001 Part 1: Overview of Local Area Network Standards
• * ISO/IEC/IEEE 8802-1Q:2016 Part 1Q: Bridges and bridged networks
• * ISO/IEC/IEEE 8802-1X:2013 Part 1X: Port-based network access control
• * ISO/IEC/IEEE 8802-1AB:2017 Part 1AB: Station and media access control connectivity discovery
• * ISO/IEC/IEEE 8802-1AE:2013 Part 1AE: Media access control security
• * ISO/IEC/IEEE 8802-1AR:2014 Part 1AR: Secure device identity
• * ISO/IEC/IEEE 8802-1AS:2014 Part 1AS: Timing and synchronization for time-sensitive applications in bridged local area networks
• * ISO/IEC/IEEE 8802-1AX:2016 Part 1AX: Link aggregation
• * ISO/IEC/IEEE 8802-1BA:2016 Part 1BA: Audio video bridging systems
• * ISO/IEC/IEEE 8802-1BR:2016 Part 1BR: Virtual bridged local area networks – Bridge port extension
• * ISO/IEC 8802-2:1998 Part 2: Logical link control
• * ISO/IEC/IEEE 8802-3:2017 Part 3: Standard for Ethernet
• * ISO/IEC/IEEE 8802-3-1:2015 Part 3-1: Standard for management information base – Definitions for Ethernet
• * ISO/IEC 8802-5:1998 Part 5: Token ring access method and physical layer specifications
• * ISO/IEC/IEEE 8802-11:2012 Part 11: Wireless LAN medium access control and physical layer specifications
• * ISO/IEC/IEEE 8802-15-4:2010 Part 15-4: Wireless medium access control and physical layer specifications for low-rate wireless personal area networks
• * ISO/IEC/IEEE 8802-22:2015 Part 22: Cognitive Wireless RAN Medium Access Control and Physical Layer Specifications: Policies and Procedures for Operation in the TV Bands
• ISO 8805 Information processing systems – Computer graphics – Graphical Kernel System for Three Dimensions functional description
• ISO/IEC 8806 Information technology – Computer graphics – Graphical Kernel System for Three Dimensions language bindings
• * ISO/IEC 8806-4 Part 4: C
• ISO 8807:1989 Information processing systems – Open Systems Interconnection – LOTOS – A formal description technique based on the temporal ordering of observational behaviour
• ISO 8811:2000 Earth-moving machinery – Rollers and compactors – Terminology and commercial specifications
• ISO 8812:2016 Earth-moving machinery – Backhoe loaders – Terminology and commercial specifications
• ISO 8815:1994 Aircraft – Electrical cables and cable harnesses – Vocabulary
• ISO/IEC 8822:1994 Information technology – Open Systems Interconnection – Presentation service definition
• ISO/IEC 8823 Information technology – Open Systems Interconnection – Connection-oriented presentation protocol
• * ISO/IEC 8823-1:1994 Protocol specification
• * ISO/IEC 8823-2:1997 Protocol Implementation Conformance Statement proforma
• ISO/IEC 8824 Information technology – Abstract Syntax Notation One
• * ISO/IEC 8824-1:2015 Specification of basic notation
• * ISO/IEC 8824-2:2015 Information object specification
• * ISO/IEC 8824-3:2015 Constraint specification
• * ISO/IEC 8824-4:2015 Parameterization of ASN.1 specifications
• ISO/IEC 8825 Information technology – ASN.1 encoding rules
• * ISO/IEC 8825-1:2015 Specification of Basic Encoding Rules, Canonical Encoding Rules and Distinguished Encoding Rules
• * ISO/IEC 8825-2:2015 Specification of Packed Encoding Rules
• * ISO/IEC 8825-3:2015 Specification of Encoding Control Notation
• * ISO/IEC 8825-4:2015 XML Encoding Rules
• * ISO/IEC 8825-5:2015 Mapping W3C XML schema definitions into ASN.1
• * ISO/IEC 8825-6:2015 Registration and application of PER encoding instructions
• * ISO/IEC 8825-7:2015 Part 7: Specification of Octet Encoding Rules
• ISO 8826 Technical drawings – Rolling bearings
• * ISO 8826-1:1989 Part 1: General simplified representation
• * ISO 8826-2:1994 Part 2: Detailed simplified representation
• ISO 8827:1988 Implants for surgery – Staples with parallel legs for orthopaedic use – General requirements
• ISO 8828:2014 Implants for surgery – Guidance on care and handling of orthopaedic implants
• ISO 8835 Inhalational anaesthesia systems
• * ISO 8835-7:2011 Part 7: Anaesthetic systems for use in areas with limited logistical supplies of electricity and anaesthetic gases
• ISO 8836:2014 Suction catheters for use in the respiratory tract
• ISO 8843:2005 Aircraft – Crimp-removable contacts for electrical connectors – Identification system
• ISO 8855:2011 Road vehicles – Vehicle dynamics and road-holding ability – Vocabulary
• ISO/IEC 8859 Information technology – 8-bit single-byte coded graphic character sets
• * ISO/IEC 8859-1:1998 Part 1: Latin alphabet No. 1
• * ISO/IEC 8859-2:1999 Part 2: Latin alphabet No. 2
• * ISO/IEC 8859-3:1999 Part 3: Latin alphabet No. 3
• * ISO/IEC 8859-4:1998 Part 4: Latin alphabet No. 4
• * ISO/IEC 8859-5:1999 Part 5: Latin/Cyrillic alphabet
• * ISO/IEC 8859-6:1999 Part 6: Latin/Arabic alphabet
• * ISO/IEC 8859-7:2003 Part 7: Latin/Greek alphabet
• * ISO/IEC 8859-8:1999 Part 8: Latin/Hebrew alphabet
• * ISO/IEC 8859-9:1999 Part 9: Latin alphabet No. 5
• * ISO/IEC 8859-10:1998 Part 10: Latin alphabet No. 6
• * ISO/IEC 8859-11:2001 Part 11: Latin/Thai alphabet
• * ISO/IEC 8859-13:1998 Part 13: Latin alphabet No. 7
• * ISO/IEC 8859-14:1998 Part 14: Latin alphabet No. 8
• * ISO/IEC 8859-15:1999 Part 15: Latin alphabet No. 9
• * ISO/IEC 8859-16:2001 Part 16: Latin alphabet No. 10
• ISO 8860 Information processing – Data interchange on 90 mm flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad on 80 tracks on each side
• * ISO 8860-1:1987 Part 1: Dimensional, physical and magnetic characteristics
• * ISO 8860-2:1987 Part 2: Track format
• ISO 8871 Elastomeric parts for parenterals and for devices for pharmaceutical use
• * ISO 8871-1:2003 Part 1: Extractables in aqueous autoclavates
• * ISO 8871-2:2003 Part 2: Identification and characterization
• * ISO 8871-3:2003 Part 3: Determination of released-particle count
• * ISO 8871-4:2006 Part 4: Biological requirements and test methods
• * ISO 8871-5:2016 Part 5: Functional requirements and testing
• ISO 8872:2003 Aluminium caps for transfusion, infusion and injection bottles – General requirements and test methods
• ISO/IEC 8877:1992 Information technology – Telecommunications and information exchange between systems – Interface connector and contact assignments for ISDN Basic Access Interface located at reference points S and T
• ISO/IEC 8878:1992 Information technology – Telecommunications and information exchange between systems – Use of X.25 to provide the OSI Connection-mode Network Service
• ISO 8879:1986 Information processing – Text and office systems – Standard Generalized Markup Language
• ISO/IEC 8881:1989 Information processing systems – Data communications – Use of the X.25 packet level protocol in local area networks
• ISO/IEC 8882 Information technology – Telecommunications and information exchange between systems – X.25 DTE conformance testing
• * ISO/IEC 8882-1:1996 Part 1: General principles
• * ISO/IEC 8882-2:2000 Part 2: Data link layer conformance test suite
• * ISO/IEC 8882-3:2000 Part 3: Packet layer conformance test suite
• ISO/IEC 8886:1996 Information technology – Open Systems Interconnection – Data link service definition
• ISO 8887 Technical product documentation – Design for manufacturing, assembling, disassembling and end-of-life processing
• * ISO 8887-1:2017 Part 1: General concepts and requirements
• ISO 8909 Forage harvesters
• * ISO 8909-1:1994 Part 1: Vocabulary
• ISO 8910:1993 Machinery and equipment for working the soil – Mouldboard plough working elements – Vocabulary
• ISO 8927:1991 Earth-moving machinery – Machine availability – Vocabulary
• ISO 8930:1987 General principles on reliability for structures – List of equivalent terms
• ISO 8936:2017 Awnings for leisure accommodation vehicles - Requirements and test methods
• ISO 8954 Ferroalloys - Vocabulary
• * ISO 8954-1:1990 Part 1: Materials
• * ISO 8954-2:1990 Part 2: Sampling and sample preparation
• * ISO 8954-3:1990 Part 3: Sieve analysis
• ISO 8957:1996 Information and documentation - Hebrew alphabet coded character sets for bibliographic information interchange
• ISO 8965:2013 Logging industry – Technology – Terms and definitions
• ISO 8979:2004 Pliers and nippers for electronics - Nomenclature
• ISO 8980 Ophthalmic optics – Uncut finished spectacle lenses
• * ISO 8980-1:2017 Part 1: Specifications for single-vision and multifocal lenses
• * ISO 8980-2:2017 Part 2: Specifications for power-variation lenses
• * ISO 8980-3:2013 Part 3: Transmittance specifications and test methods
• * ISO 8980-4:2006 Part 4: Specifications and test methods for anti-reflective coatings
• * ISO 8980-5:2005 Part 5: Minimum requirements for spectacle lens surfaces claimed to be abrasion-resistant
• ISO 8999:2001 Reciprocating internal combustion engines - Graphical symbols