List of Tamiya product lines

Radio-controlled vehicles

Cars (1/12 scale)

• The first radio-controlled car to be released by Tamiya was a Porsche 934 in 1976. Its body was based upon an existing 1/12 scale static kit that Tamiya had already been manufacturing, so the effect was that of a traditional static model kit with the added ability to be radio-controlled – something Tamiya acknowledged, as all of their early kit boxes carried the wording "suitable for radio control". The Porsche 934 was a massive hit – selling over 100,000 units in its first year. The potential market for easy to assemble electric radio-controlled model cars was clear and the 934 was soon followed by a kit of the Porsche 935.
• Lamborghini Countach LP500S, the eighth car to be released by Tamiya. Although released previously this model is the first to use the Competition Special tag, meaning that it is a hopped-up version. The early models came equipped with the more powerful RS540 unit, as opposed to the standard RS380S, and sponge/diplo tyres, which were later adopted by competition cars of that size as opposed to rubber. It also featured a thicker chassis with different cast metal steering.
• Can-Am Lola RM1, based on the T333 that Jacky Ickx used to win the reformatted Can-Am series in 1979. This was Tamiya's further foray into building competition cars, hence the RM tag that appeared on the box, the first of seven cars. The car did feature a few groundbreaking innovations that became common in other RC cars, these were the introduction of the first hop-up RC motor the Mabuchi Black RS-540SD, fully adjustable flex/tweak chassis, over-engineered sophisticated step-less MSC with microswitch and braking, to use the BEC radio gear and to come fully ball raced. It was the first Tamiya car to use a polycarbonate body shell rather than the heavier and fragile moulded ABS of the previous cars. This was soon followed by the release of the Datsun 280ZX RM Mk2, a model of the car driven by Paul Newman to win the SCCA CP title. A narrower redesigned version of the RM chassis with the same axle/drivetrain/steering components as the RM1, but minus the MSC, diff, bearings and RS-540SD Motor; all which can be fitted in as an option.
• Tornado RM. Mk3, released two years after the first RM model, leading to an upsurge in the market for the 1/12 scale pan racers, which by then many companies including Associated, Schumacher, Delta, Kyosho, and ABC had become involved in the market. As a result, Tamiya redesigned the RM's pan chassis reducing its weight by leaving out some of the less-used items that were offered in the RM1. Other adjustments were that the RM3 could accept the 7.2V stick packs and an uprated adjustable mechanical speed controller, known as the SuperChamp MSC. The RM3's steering arrangement had returned to the simpler setup with an adjustable caster. The body shape would become common with RC cars throughout the decade. Tamiya's further evolution with the RM5/6 would be another all-new design featuring a stiffening top plate and a floating rear pod with a single spring.
• The Porsche 959, released in 1986 was a 1/12 scale radio-controlled replica of the car that won the 1986 Paris Dakar Rally and was one of the most complex and highly detailed R/C model kits ever made. It was soon followed by the Toyota Celica Gr.B, a replica of the Safari Rally winner, which shared the same chassis as the Porsche 959 but included several upgrades such as a third differential in the centre of the car and a much needed front anti-roll bar, making it an even more complex kit.

  Cars (1/10 scale)

• Williams FW07, although not the first F1 car to be released, as well as being the second to use the CS banner, further changes would be made with its release. As well as having the standard equipment found on all CS models the main chassis is single deck FRP rather than the single deck aluminium of early versions, the motor mount is a lighter pressed alloy instead of heavy cast alloy as well as front uprights of nylon instead of alloy and a rear motor pod of stamped metal plate instead of cast metal. Examples can fetch almost US$1000.The SRB line of off-road buggies began in 1979 starting with the Rough Rider, than the Sand Scorcher, followed by the Ford Ranger. These vehicles featured a scaled down version of the Volkswagen Beatle chassis used on many desert racing buggies. The final SRB to come along in 1983 was the Super Champ. The Super Champ was unique from the other SRBs due to its use of a rear "mono -shock" design. Aside from the SRB line were the Hilux and Blazing Blazer 3 speed 4 wheel drives both released in 1982. The original Wild Willy kit was revised in 1985 to give it a slightly longer wheelbase leaving the earlier, shorter wheelbase version quite hard to find. Wild Willy 2 was released in 2000 utilizing a pre-assembled Wild Dagger gearbox and tires from Lunch Box, but otherwise a wholly new mechanical design. Wild Willy 2 retained the Jeep body with only a few minor differences, such as horizontal front grill slits instead of the vertical slits of the original. There has also been a metallic edition of Wild Willy 2.
• The Subaru Brat was released in 1982. It was a two-wheel-drive off-road radio-controlled buggy that was both fast and much lighter than its predecessors. This model also marked a new balance between the use of metal and plastic components. The chassis of the Brat was used for the basis of the Frog, Black Foot, and Monster Beetle.
• The Frog, released in 1983, was an improvement on the previous year's Brat release. It featured an updated differential, ball bearings, oil shocks, and a lighter polycarbonate body. The Frog was very popular and marked the beginning of Tamiya's use of animal themes to draw inspiration for its vehicle designs and colours – an idea that proved extremely popular and which was continued through several kits. The Frog kit was also re-released in 2005, though with a few alterations such as more reliable dog bone type universal shafts and an Electronic Speed Controller. The Frog's lower price and weight, began the 1/10 scale offroad racing phenomenon. However, its role in racing was limited with the release the following year of the Team Associated RC10.
• The Grasshopper, released in 1984, was a two-wheel-drive off-road radio-controlled buggy. It was very rugged and featured a simple construction and was Tamiya's most affordable buggy. It featured a bathtub chassis holding a simple rigid axle in the rear and single wishbone front suspensions in the front. Its 380-sized motor meant it was among Tamiya's slower models at the time, though its lighter ABS plastic bathtub chassis helped put its speed only a little behind that of the earlier, heavier Special Racing Buggies. It was also much more economical on batteries and overall it was the ideal off-roader for the first-time hobbyist which also made it very popular. The Grasshopper kit was re-released in 2005 with a few alterations.
• The Hornet, released in 1984, was a two-wheel-drive off-road radio-controlled buggy which was quite fast and rugged. It shared most components with the Grasshopper, though it was faster and lighter due to a polycarbonate body. It would go on to become one of the most popular R/C kits of all time and was re-released in December 2004 with a few alterations. There was also a sequel, the Super Hornet, which was released in 1994 and was still being manufactured exclusively for the Australian market until 2006, making it one of the longest-running Tamiya kits in history.
• The Thunder Shot, Released in 1987, was a four-wheel-drive buggy. The Thunder Shot was the first Tamiya Buggy to be released as a 'Complete Kit'. Only two of the First 100 were released as a complete kit. It included an ADSPEC Controller and Servo inside the box which had the 58067 model. This was bundled as model 57001. The Sonic Fighter was 57002. Both were introduced in the Tamiya yearly catalogue for the first time in the 1988 issue shown as complete kits. For the 1989 issue and every issue until they were no longer available in 1991 the Thunder Shot was always pictured and shown only in the 58067 form. The complete kit was only available for the first production run and was discontinued mid-1988. Generally, most collectors do not know of the Thunder Shot 'complete kit'. With only a couple left in the world that have not been built, it makes the unbuilt Thunder Shot 'complete kit' one of the most prized models to find for a collector. Especially seeing only two of the first 100 were ever released in this form with a much bigger box to house the 58067 and the ADSPEC controller and Servo.
• The Hotshot, released in 1985, Tamiya's first four-wheel-drive off-road buggy. It broke new ground for Tamiya and also enthusiasts, and was the car to beat in 1/10-scale buggy racing when it was released. It featured four-wheel independent double-wishbone suspension, a unique mono-spring suspension that used only two springs for the entire four wheels. For its time, the car was light, rugged and upgradeable. In the years that followed parts of the Hotshot were evolved and reused in several other 4WD buggy models including the Hotshot 2, the Boomerang, the Super Sabre and Tamiya's 10th Anniversary car, the Bigwig. In 2007 the Hotshot was re-released. An ESC is included instead of a mechanical speed controller and the body has a metal patch functioning as a heatsink to dissipate heat from the ESC, dog-bone shafts are simplified, Hexa bolt and Hexa cup universal for connecting front and rear gearboxes are discarded and a simpler dog-bone shaft is adapted. Because of ESC the original heatsinks on resistors for the mechanical speed controller are no longer necessary but are included as dummies as they are unique to the Hotshot. Other parts and designs are identical. Unfortunately, there remain some minor problems with Hotshot: bump steer, the front wishbones rubbing on the inside of the front wheels and the front spring's attachment point to the lower wishbones being weak.
• The Bruiser 1/10-scale radio-controlled pickup truck, released in 1985, had a working three-speed transmission which could be shifted via radio control, a high-torque RS-750SH motor and an ultra-realistic Toyota Hilux body with a sleeper cab and interior detail. The steel frame, leaf suspension, front, and rear axle and steering were patterned after their full-sized counterparts. This complex model has since become one of the most collectibles of all Tamiya R/C cars. It featured a mechanically shiftable 3-speed transmission, using a 3rd radio channel. It would run in 4x4 mode in the lowest gear only. No other RC car or truck of the time offered shiftable mechanical transmission making it highly realistic.
• The original Blackfoot monster truck kit and its variations, first released in 1986, was credited with much of the hobby's growth. The Blackfoot line included the original Blackfoot, Super Blackfoot, and King Blackfoot, all sharing the same ORV spaceframe chassis first used in Frog but featuring some improvements. The Blackfoot Extreme used the chassis from the Wild Dagger. The Blackfoot was a Ford F-150 despite its inspiration being drawn from the real Bigfoot monster truck which was a Ford F-250. The Monster Beetle, now a very collectible model, was nearly identical to the Blackfoot with the addition of gold wheels, oil-filled shocks and of course the Volkswagen Beetle bodyshell.
• Vanessa's Lunchbox, actually a 1/12-scale kit due to its monster truck design and short wheelbase, was released in 1987. It made use of the strong Grasshopper/Hornet gearbox and had an exceptionally detailed hard body shell of a Dodge van, heavily inspired by the real monster truck Rolin' Thunder. It was a "fun" vehicle, having poor stability and performing long wheelies, and in many respects was therefore similar to real monster trucks of the future. This also made it one of the more popular models and it was re-released in 2005 with only minor modifications. A metallic gold edition followed in 2007.
• Midnight Pumpkin is a sister truck to the Lunchbox that used the same chassis, gearbox, suspension, and tyres. It was also based on a real monster truck, Frankenstein, although the model was mostly black instead of the yellow worn by the real truck. In early 2006, a metallic chrome edition was released.
• The Clod Buster 1/10-scale radio-controlled monster truck was released in 1987 as the first Tamiya R/C monster truck with two drive motors, four-wheel drive, and four-wheel steering. Each of the front and rear axles were identical, and the motor is attached to the axle itself, making it a very simple design. This simple design allowed the axles to be used in modified vehicles. The Clod Buster spawned an aftermarket industry of its own that catered to those who wished to modify their models to "crawlers", specialized vehicles designed to climb steep and rugged surfaces. The Clod Buster has remained popular since its introduction and produced the Super Clod Buster. The Clod Buster was also released with a detailed semi-truck body, as the Bullhead. The Clod Buster still has a large aftermarket following with many companies designing parts for rock crawling as well as trailer pulling and racing. The main reason for its continued use is its ultra-strong gearboxes.
• The Avante, released in 1988. This was a car specifically designed to return Tamiya to the forefront of R/C racing. Its unique design featured an FRP chassis, aluminium components everywhere and almost limitless adjustments. Unfortunately, it was somewhat over-engineered – The car was too heavy, too fragile, dynamically inept, and uncompetitive. However, it is still a highly desirable model to a Tamiya collector because of the unique and uncompromising engineering that went into it.
• The Egress is the follow-up to the Avante, with material that was advanced for the time. Unlike the Avante, it has simplified suspension and a longer wheelbase arrangement that was seen in Vanquish/Avante2001.The avante drivetrain is carried forward except with ball diffs F/R and one-way bearing in the middle. Like the Avante it was a no expense is spared car, it even came with Platinum hi-cap dampers, a full set of blue-rubber-sealed bearings, graphite chassis plates and towers, alloy hardware and titanium screws.
• The Astute was Tamiya's first attempt to build a serious 2WD competition car. The car came equipped with everything that was needed to make the car competitive including ball diff, ball-raced gearbox, oil-filled dampers at each corner, front anti-roll bar and all adjustable suspension geometry. The unusual step of installing metal bushes in all suspension pivot points was taken, which reduces the amount of slop in the suspension due to flexing and slows down the rate of wear in these joints. Although fully adjustable this did add extra weight and complexity and it may be for these reasons that it was never very widely used on the racing scene. Jamie Booth did win the European championship in 1991 with a modified and simplified Astute with parts from Tamiya Madcap. Some of his modifications were later found on the Super Astute which addressed many of the faults of its predecessor.
• The Nissan Skyline GT-R Nismo was a TA-01 chassis kit released in 1991. The TA-01 chassis was derived from the Manta Ray buggy with shorter arms, narrower wheels and radial tires. This kit wasn't the first TA-01 kit, nor was the TA-01 the first chassis to be designed to be fitted with a touring car body. Due to its popularity, this Skyline GT-R kit was credited for creating the touring car craze during the early 1990s as well as the chassis introducing the one-make low-cost racing known as the Tamiya Racing Championship.
• The TR-15T was one of the first gas-powered stadium trucks to be released on the market. Unfortunately, the TR-15T was not a commercial success and was discontinued quickly. Nowadays the car is one of the more collectible RC models commanding over $450 in a mint boxed unopened condition.
• The Juggernaut was an attempt to create a true monster truck, bigger than any previously attempted in the R/C world. It featured 4×4 and four-wheel steering with a tire diameter of 6.5 inches and weighing one pound each. It remains as one of the biggest and failures in Tamiya's history. It featured two rigid axles but, unlike Clod Buster, two motors were located in the central gearbox in tandem. From the central gearbox two universal shafts connected to the front and rear axles. Its massive weight of 4.5 kg, combined with low gear ratios necessary to provide enough torque to move the monster, would simply destroy the bevel gears in the axle in one run. Tamiya quickly revised many parts: The bevel gears in the axle received reinforcements of more bearings and lower gear ratios. Released in 1999 Juggernaut would have received a prominent feature in the 2000 Tamiya Catalog signaling that Tamiya was back in monster trucks after the 13 years since Clod Buster. Due to its catastrophic failure Juggernaut is not featured in any of the yearly catalogs at all. Instead, the revised and re-colored Juggernaut 2 appears in the 2001 catalog along with the Mammoth, a Juggernaut 2 based Mammoth Dump truck. Juggernaut 2 and Mammoth both retained the complex link suspension and leaf springs that did not allow adequate articulation, giving them a very bouncy ride.
• The TXT-1 1/10 scale radio control monster truck was released in 2002. The axles and gears are almost entirely identical to Juggernaut 2, with slightly bigger diameter universal shafts. With TXT-1 Tamiya engineers shifted attention from simply building a massive monster truck to a very capable rock crawler. This truck, which is still in production, was designed as a factory response to aftermarket Clodbuster upgrades. Four-wheel drive and cantilever multi-link suspension allow for the axle articulation featured in third party kits such as the Clodzilla series. The new truck dispensed with the unreliable four-wheel steering of Juggernaut 1 and 2's single under-powered servo sat in the center of the vehicle. Instead, the TXT would mount one servo to steer the front wheels only. As an option, the rear axle can also mount a servo allowing all 4 wheels to steer. Tamiya engineers attended USHRA monster truck events in order to improve the scale appearance of the TXT and duplicate full-size suspension designs. Having fixed all the Juggernaut's suspension problems and with improved chassis and steering it remains one of the most capable crawlers.
• The TRF414 series radio-controlled cars was holder of the 2002–04 IFMAR ISTC 1/10-scale electric touring car world champion title. The TRF414 was created in response to Tamiya's customer demands for a more adjustable and efficient touring car than the TA03. It was the first Tamiya touring car to depart from the previous gear-driven layouts used in the TA01/02 and TA03, instead employing two unequal-length belts to transmit the power to all four wheels with only one geared step. The TRF414M2 was a popular touring car due to its low cost relative to other cars in its class.
• The TRF415 holder of the 2004–06 IFMAR ISTC 1/10-scale radio-controlled electric touring car world champion title.
• The TA01/TA02 chassis series from the early-mid-1990s were sold with various body shells. The TA01 was based on Tamiya's Manta Ray buggy and was one of the first kits on the market to be sold with a realistic body coupled with a capable, easy-handling 4WD chassis. Some of these body shells are among the most realistic and detailed lexan bodies ever made by any manufacturer. Models worthy of note are the E30 BMW M3, W201 Mercedes 190E 2.5–16 Evolution-II, Ford Escort RS Cosworth and the Lancia Delta Integrale. Tamiya re-released the bodies recently, either sold separately or bundled with a TT-01 kit.
• The TL-01/TL-01LA/TL-01B/TL-01RA chassis, released from the mid-'90s to the late '90s, was an innovative shaft-driven 4WD touring chassis with a narrow three-piece vertically sandwiched chassis design. Its characteristics include high durability and low cost, making it an excellent starting car for beginners. Like the TA01/TA02 it was released with many different rally, touring and sports car bodies and incorporated various minor modifications throughout its production run. Tamiya released the TL-01 with modified with long arms and buggy size wheels to as the TL-01B marketed as the Baja Champ and later Baja King buggies. The TL-01 remains one of the more popular Tamiya chassis today.
• The TLT-1 is a small truck of about 1/15 scale. It is a scaled-down version of TXT-1. Light weight and TXT-1 style suspension system makes it a very capable little climber. It has quickly become widely known as one of the most versatile RC cars for projects for scale rock crawling, a hobby that is starting to make itself noticed by the general RC market. Like the Clod Buster, its axles are highly desirable.
• Nitro Thunder is a 4×4 buggy powered by a.15 glow engine. It utilizes an off-road racing buggy chassis called NDF-01. Just as TNX has shown promise in racing circuits the NDF-01 is a smaller 1/10 sized off-road racer. Use of a resin tub chassis, instead of aluminum, and a frontal impact control system that absorbs shocks from a collision indicate that Nitro Thunder is built with young racers in mind. Adjustability of the suspension, rear exhaust and full ball bearings are features often found in models for experienced racers. Just as Kyosho offers scaled-down 1/10 buggy of their 1/8 buggies for inexperienced racers Nitro Thunder is Tamiya's entry into the 1/10 buggy market. Nitro Blaster is an identical buggy with different exterior.
• The Ford F-350 High Lift, released in 2006, is a modernized version of the vintage three-speed trucks, such as the Bruiser and Mountaineer. A three-speed gearbox from the tractor trailer truck series mounts on steel chassis rails, with leaf springs and grease friction dampers supporting it on modified TLT axles. The truck is finished with a detailed hard body version of the Ford F-350, very similar to the earlier Juggernaut's body. It is a very capable crawler in its own right and a sister truck, with a Bruiser body was released in Dec 200, with a scale surf board as an accessory.
• The TA05, released in spring 2005, is the replacement for the TRF414-derived TA04 line of touring cars. The chassis is a clean-sheet design featuring a twin-belt drivetrain utilizing two equal-length belts, a center-mounted motor and a low layshaft, resulting in a nearly 50/50 front–back weight distribution. The car is very popular with touring car racers due to its ease of set-up and its relatively low-maintenance drivetrain. Tamiya marketed the TA05 with various sports and racing car bodies and Tamiya also released the TA05-IFS along with the limited-edition TA05MS, and the hopped-up TA05R in spring 2007. The IFS features an inboard front suspension with pushrod-activated laydown shocks, which is a first for a 1/10 scale electric mainstream touring car. The chassis can be bought with various low-slung bodies such as the Vemac RD350 body in Ebbro Team Nova's livery, the GT500 Lexus SC430, and the 2007 Raybrig NSX.

  Tamtech

• Tamtech, released in 1986, is a series of smaller radio controlled cars which can be quickly assembled and driven, powered by a 7.2v battery. The first two cars released were the Porsche 962 followed shortly by the Lancia LC2. Seven 1/24 cars have been released with the other five being: BMW GTP, Ford Mustang Probe, Ferrari Testarossa, Porsche 961 and Lamborghini Countach 5000QV. Tamiya turned next to 1/14 F1 cars releasing only three: Ferrari 643, Lotus 102B and McLaren MP4/6. Finally one 1/18 monster truck, Max Climber, was made before the Tamtech line was dropped in favor of the QD ready to run cars. In 1988 Tamiya released a scale model of the Porsche 962 using the Tamtech body, however accurate, many modelbuilders and enthusiasts of the Group C/IMSA GTP racer cited the rear bulk of the engine hatch is bigger than that of the full-sized counterpart. Much of the car's lack of real success was because the popularity of the large sized counterpart meant that there were very little demand for small-scale RC cars. The Tamtech cars would later influence other RC car manufacturers including Kyosho to build miniature RC cars, such as their own highly successful Mini-Z series and RadioShack's popular XMODS.

  RC Gliders

• Tamiya offers a couple of Radio Controlled gliders with wingspans around 6 ft.. Peak Spirit has a foldable propeller that can be deployed when necessary. Alt Stream is an unpowered RC glider.

  Quick Drive

Solar powered cars

Trucks and trailers (1/14 scale)

• King Hauler
• Globeliner
• Mercedes-Benz 1838LS
• Mercedes-Benz 1850L
• Volvo FH12 Globetrotter 420
• Ford AeroMax
• Knight Hauler
• Scania R-series R 470 Highline
• Scania R-series R 620 Highline
• MAN TGX 18.540 XLX
• MAN TGX 26.540 XLX
• Mercedes-Benz Actros 1851 GigaSpace
• Freightliner Cascadia Evolution
• Grand Hauler

• Flatbed trailer
• Box trailer
• Tank trailer
• Pole trailer

• European Type 3 Axle Reefer Semi Trailer
• European Type 3 Axle 40 ft Intermodal container Semi-Trailer

Tanks (1/16 scale)

• M4 Sherman 105 mm
• Leopard 1A4
• Flugabwehrkanonenpanzer Gepard
• German Tiger II, Production Turret
• German Tiger II – Porsche Turret
• Tiger I Early Production
• M26 Pershing T26E3
• Leopard 2A6
• German Panther tank G
• Jagdpanther

Yachts (1/20 scale)

• Yamaha Round the World
• Yamaha 40EX
• 36 Class R/C Racing Yacht Innovator

  Track racing cars

• The Mini 4WD and Dangun-Racer series are small single-motor free-operating electric models designed to operate using two AA-sized batteries and run on a special deeply channeled track.

  Static-display scale models

Military Vehicles (1/35)

Aircraft

Automobiles

• Tyrrell P34 Six Wheeler - 20001
• McLaren M23 - 20002
• Porsche 928 - 20003
• Team Lotus J.P.S.Mk.III - 20004
• Martini Porsche 935 Turbo - 20005
• Wolf WR-1 Ford - 20006
• Brabham BT46 Alfa Romeo - 20007
• Porsche 935 Turbo - 20008
• Toyota Celica LB Turbo Gr.5 - 20009
• Ferrari F312T3 - 20010
• Racing Pit Team - 20011
• Ligier JS11 Ford - 20012
• Fiat 131 Abarth Rally - 20013
• Williams FW-07 - 20014
• Fiat 131 Monte-Carlo Winner - 20015
• Porsche 928S - 20016
• Brabham BT50 BMW Turbo - 20017
• Renault RE-30B Turbo - 20018
• Williams FW-11 Honda - 20019
• Lotus Honda 99T - 20020
• Benetton Ford B188 - 20021
• McLaren MP4/4 - 20022
• Ferrari F189 Early Version - 20023
• Ferrari F189 Portuguese G.P. - 20024
• Williams FW13B - 20025
• McLaren MP4/5B - 20026
• Driver & Tech. Engineer Set - 20027
• Leyton House CG901B - 20028
• Braun Tyrrell Honda 020 - 20029
• Lotus Type 102B - 20030
• Tyre Changing Pit Crew - 20031
• Jordan 191 - 20032
• Lotus Ford 102D - 20033
• Lotus Ford 102D - 20034
• McLaren MP4/7 - 20035
• Benetton Ford B192 - 20036
• Lotus 107 Ford - 20037
• Lotus 107B Ford - 20038
• McLaren MP4/8 - 20039
• Newman Haas K Mart Texaco Lola T93/00 Ford - 20040
• Dick Simon Duracell Mobil 1 Sadia Lola T93/00 Ford - 20041
• Tyrrell Yamaha 023 - 20042
• Honda F1 RA272 - 20043
• Lotus 25 Coventry Climax - 20044
• Ferrari F310B - 20045
• McLaren MP4/13 - 20046
• McLaren MP4/13 Japanese GP - 20047
• Ferrari F1-2000 - 20048
• Ferrari F1-2000 - 20049
• Brabham BT-46 Alfa Romeo - 20050
• Ferrari 312T3 - 20051
• Ferrari F2001 - 20052
• Tyrrell P34 1977 Monaco GP - 20053
• Ferrari F2001 - 20054 - Clear cowl
• WilliamsF1 BMW FW24 - 20055
• Full-View WilliamsF1 BMW FW24 Italian GP 2002 - 20056
• Lotus 99T Honda - 20057
• Tyrrell P34 Six Wheeler 1976 Japan GP - 20058
• Ferrari F60 - 20059
• Lotus Type 79 1978 - 20060
• Lotus Type 79 1979 - 20061
• McLaren M23 1976 - 20062
• Motorsports Team Set - 20063
• Wolf WR1 1977 - 20064
• Lotus 78 - 20065
• Porsche 928 - 20066
• Red Bull Racing RB6 - 20067
• Ferrari SF70H - 20068

  Solar powered models

Motorcycles

• Yamaha YZR500 Grand Prix Racer – 14001 *
• Yamaha RZ250 – 14002 *
• Suzuki RGB500 Grand Prix Racer – 14003 *
• Yamaha RZ350 – 14004 *
• Yamaha Scooter Beluga 50 – 14005 *
• Honda CB750F – 14006
• Honda CB900F2 Bol d'Or – 14007 *
• Honda CB1100R – 14008 *
• Suzuki RGB500 Team Gallina – 14009 *
• Suzuki GSX1100S Katana – 14010
• Honda CR250R Motocrosser – 14011 *
• Kawasaki KR1000F Endurance Racer – 14012 *
• Suzuki RM250 Motocrosser – 14013 *
• Honda RS1000 Endurance Racer – 14014 *
• Suzuki GSX750S – 14015 *
• Honda CX500 Turbo – 14016 *
• Honda VT250F – 14017 *
• Honda CR450R Motocrosser – 14018 *
• Ducati 900 Mike Hailwood Replica – 14019 *
• Suzuki GSX750 Police Bike – 14020 *
• Honda VF750F – 14021 *
• Ducati 900 NCR Racer – 14022 *
• Honda MVX250F – 14023 *
• Suzuki RG250 Gamma – 14024 *
• Ducati 900SS – 14025 *
• Kenny Roberts & the Yamaha YZR500 – 14026 *
• Jumping Driver – 14027 *
• Kawasaki KR500 Grand Prix Racer – 14028 *
• Suzuki RG250 Gamma Full Option – 14029 *
• Honda VT250F Integra – 14030 *
• Honda VF750F Fully Cowl – 14031 *
• Honda NS500 Grand Prix Racer – 14032 *
• Racing Rider – 14033 *
• Suzuki GSX750S New Katana – 14034
• Honda CBR400F – 14035
• BMW K100 – 14036 *
• Yamaha RZV500R – 14037
• Yamaha YZR500 – 14038 *
• Honda CBR400F Endurance – 14039
• Straight Run Rider – 14040 *
• Starting Rider – 14041 *
• Honda NS500 With Starting Rider – 14042 *
• Yamaha YZR500 & Straight Run Rider – 14043 *
• Yamaha XV1000 Virago 14044
• Kawasaki GPZ400R – 14045
• KTM250 Motocrosser – 14046 *
• Yamaha FZ250 Phazer – 14047 *
• Yamaha SRX-6 – 14048
• BMW R80 G/S '85 Paris Dakar Rally Winner – 14049 *
• Honda NS500 With Racing Figure – 14050 *
• KTM250MX With Motocross Rider – 14051 *
• Yamaha XV1000 Virago With Touring Rider – 14052 *
• Suzuki RG250 Gamma Walter Wolf Version – 14053 *
• Honda NXR750 86 Paris Dakar Rally Winner – 14054 *
• Honda NSR500 Grand Prix Racer – 14055 *
• BMW R80 G/S With Paris Dakar Rider – 14056 *
• Honda VFR750R – 14057
• Yamaha FZR750R – 14058
• Honda NSR250 Repsol – 14059
• Honda NR – 14060
• Cup Noodle Honda NSR250 – 14061
• Bimota Tesi 1D 906SR – 14062
• Ducati 888 Superbike Racer – 14063*
• Yamaha TZ250M – 14064
• Suzuki GSX1100S Katana Custom Tuned – 14065
• Honda CB750F Custom Tuned – 14066
• '94 Yamaha TZ250M – 14067
• Ducati 916 – 14068 *
• Moto Guzzi V10 Centauro – 14069
• Honda CDR1100XX Super Blackbird – 14070
• Repsol Honda NSR500 '98 – 14071
• Moviestar Honda Pons NSR500 '98 – 14072
• Yamaha YZF-R1 – 14073
• Yamaha YZF-R1 Taira Racing – 14074
• Yamaha YZR500 Taira Version – 14075
• Red Bull Yamaha WCM YZR500 '99 – 14076
• Repsol Honda '99 – 14077
• Antena 3 Yamaha D'Antin YZR500 – 14078
• Honda CBR1100XX Super Blackbird "With Me" – 14079 *
• Yamaha XV1600 Road Star – 14080
• Suzuki RGv Gamma – 14081
• Nastro Azzurzo Honda NSR500 – 14082
• Telefónica Movistar Suzuki RGV '00 – 14083 *
• Kawasaki Ninja ZX-12R – 14084
• "Full View" Yamaha YZF-R1 Taira Racing – 14085 *
• Tech 3 Yamaha YZR500 '01 – 14086
• Honda Pons NSR500 '01 – 14087 *
• Factory Yamaha YZR500 '01 – 14088
• Telefónica Movistar Suzuki RGv Gamma '01 – 14089
• Suzuki Hayabusa 1300 – 14090
• Antena 3 Yamaha D'Antin YZR500 '02 – 14091
• Repsol Honda RC211V – 14092
• Yoshimura Hayabusa X-1 – 14093
• Telefónica Movistar Honda RC211V '03 – 14094
• Team Honda Pons RC211V '03 – 14095
• Repsol Honda RC211V '03 – 14096
• Repsol Honda RC211V '03 Valencia – 14097
• Yamaha YZR-M1 '04 – 14098
• Repsol Honda RC211V '03 – 14099
• Yamaha YZR-M1 No.7/33 – 14100
• Ducati Desmosedici - 14101
• Akai Yamaha YZR 500 – 14102
• Dantin Pramac Ducati GP4 - 14103
• Yamaha YZR-M1 50th Anniversary U.S. Intercoloring Edition - 14104
• Yamaha YZR-M1 50th Anniversary Valencia Edition – 14105
• Repsol Honda RC211V 06 – 14106
• Konica Minolta Honda RC211V - 14107
• LCR Honda RC211 V´06 – 14108
• Kawasaki Ninja ZX-RR – 14109
• Ajinomoto Honda NSR 250 – 14110
• Kawasaki ZZR 1400 – 14111
• Kawasaki Ninja ZX-14 Special Color Edition – 14112
• Honda RC166 GP Racer – 14113
• Yamaha YZR-M1 50th Anniversary U.S Intercoloring Edition No.46 – 14114
• Yamaha YZR-M1 50th Anniversary Valencia Edition No.46 – 14115
• Yamaha YZR-M1 ´05 No.46/No.5 – 14116
• Yamaha YZR-m1 ´09 Fiat Yamaha Team – 14117
• Valentino Rossi Figure – 14118
• Yamaha YZR-M1 ´09 Monster Yamaha Tech 3 - 14119
• Yamaha YZR-M1 ´09 Fiat Yamaha Team – 14120
• Honda NSR500 ´84 – 14121
• Racing Rider – 14122
• Straight Run Rider – 14123
• Starting Rider – 14124
• Honda NS500 ´84 – 14125
• “Full-View” Honda NSR500 ´84 – 14126
• “Full-View” Honda RC166 GP Racer – 14127
• “Full-View” Yamaha YZR-M1 ´09 Fiat Yamaha Team – 14128
• Ducati 1199 Panigale S – 14129
• Repsol Honda RC213V ´14 -14130
• Kawasaki Ninja H2R – 14131
• Ducati 1199 Panigale S Tricolore – 14132
• Yamaha YZF-R1M – 14133
• Honda Monkey 125 – 14134
• Yamaha XV1600 Road Star Custom – 14135
• Kawasaki Ninja H2 Carbon - 14136
• Street Rider - 14137
• Honda CBR1000RR-R Fireblade SP - 14138

Ships

• Tamiya produces many naval ship models in 1/350 and 1/700 scale and in both full and waterline versions. Full versions offer full hulls whereas waterline versions have flat bottoms, representing only the portion seen above the waterline giving the impression that the ship is floating when placed on a surface, which is more convenient in creating dioramas. The majority of the kits in the 1/700 waterline series are WWII Imperial Japanese Navy ships but there are also kits of WWII ships from other countries such as Germany, Britain, and the United States. The 1/700 waterline series battleship U.S.S. Missouri is 386.5 mm long with 1/350 battleships twice as long. Other 1/350 ships include the Yamato, Musashi, Bismarck, Tirpitz, USS New Jersey, USS Enterprise, HMS Prince of Wales, and more recent additions mainly on WW2 Japanese warships such as the Tone, Mogami, Mikuma, Yukikaze, and I-400 submarine. In addition the series has a few modern vessels such as the vehicle transport ship Shimokita with a transparent deck to allow viewing of the loaded hovercrafts, tanks and trucks inside.

  Tamiya Racing Factory

Supplies and Tools

General-purpose simple-model construction sets

Other