Lorentz force


In physics the Lorentz force is the combination of electric and magnetic force on a point charge due to electromagnetic fields. A particle of charge q moving with a velocity v in an electric field E and a magnetic field B experiences a force of
. It says that the electromagnetic force on a charge is a combination of a force in the direction of the electric field proportional to the magnitude of the field and the quantity of charge, and a force at right angles to the magnetic field and the velocity of the charge, proportional to the magnitude of the field, the charge, and the velocity. Variations on this basic formula describe the magnetic force on a current-carrying wire, the electromotive force in a wire loop moving through a magnetic field, and the force on a moving charged particle.
Historians suggest that the law is implicit in a paper by James Clerk Maxwell, published in 1865. Hendrik Lorentz arrived at a complete derivation in 1895, identifying the contribution of the electric force a few years after Oliver Heaviside correctly identified the contribution of the magnetic force.

Equation

Charged particle

The force F acting on a particle of electric charge q with instantaneous velocity v, due to an external electric field E and magnetic field B, is given by :
where × is the vector cross product. In terms of cartesian components, we have:
In general, the electric and magnetic fields are functions of the position and time. Therefore, explicitly, the Lorentz force can be written as:
in which r is the position vector of the charged particle, t is time, and the overdot is a time derivative.
A positively charged particle will be accelerated in the same linear orientation as the E field, but will curve perpendicularly to both the instantaneous velocity vector v and the B field according to the right-hand rule.
The term qE is called the electric force, while the term q is called the magnetic force. According to some definitions, the term "Lorentz force" refers specifically to the formula for the magnetic force, with the total electromagnetic force given some other name. This article will not follow this nomenclature: In what follows, the term "Lorentz force" will refer to the expression for the total force.
The magnetic force component of the Lorentz force manifests itself as the force that acts on a current-carrying wire in a magnetic field. In that context, it is also called the Laplace force.
The Lorentz force is a force exerted by the electromagnetic field on the charged particle, that is, it is the rate at which linear momentum is transferred from the electromagnetic field to the particle. Associated with it is the power which is the rate at which energy is transferred from the electromagnetic field to the particle. That power is
Notice that the magnetic field does not contribute to the power because the magnetic force is always perpendicular to the velocity of the particle.

Continuous charge distribution

For a continuous charge distribution in motion, the Lorentz force equation becomes:
where is the force on a small piece of the charge distribution with charge. If both sides of this equation are divided by the volume of this small piece of the charge distribution, the result is:
where is the force density and is the charge density. Next, the current density corresponding to the motion of the charge continuum is
so the continuous analogue to the equation is
The total force is the volume integral over the charge distribution:
By eliminating and, using Maxwell's equations, and manipulating using the theorems of vector calculus, this form of the equation can be used to derive the Maxwell stress tensor, in turn this can be combined with the Poynting vector to obtain the electromagnetic stress–energy tensor T used in general relativity.
In terms of and, another way to write the Lorentz force is
where is the speed of light and ∇· denotes the divergence of a tensor field. Rather than the amount of charge and its velocity in electric and magnetic fields, this equation relates the energy flux in the fields to the force exerted on a charge distribution. See Covariant formulation of classical electromagnetism for more details.
The density of power associated with the Lorentz force in a material medium is
If we separate the total charge and total current into their free and bound parts, we get that the density of the Lorentz force is
where: is the density of free charge; is the polarization density; is the density of free current; and is the magnetization density. In this way, the Lorentz force can explain the torque applied to a permanent magnet by the magnetic field. The density of the associated power is

Equation in cgs units

The above-mentioned formulae use SI units which are the most common among experimentalists, technicians, and engineers. In cgs-Gaussian units, which are somewhat more common among theoretical physicists as well as condensed matter experimentalists, one has instead
where c is the speed of light.
Although this equation looks slightly different, it is completely equivalent, since
one has the following relations:
where ε0 is the vacuum permittivity and μ0 the vacuum permeability. In practice, the subscripts "cgs" and "SI" are always omitted, and the unit system has to be assessed from context.

History

Early attempts to quantitatively describe the electromagnetic force were made in the mid-18th century. It was proposed that the force on magnetic poles, by Johann Tobias Mayer and others in 1760, and electrically charged objects, by Henry Cavendish in 1762, obeyed an inverse-square law. However, in both cases the experimental proof was neither complete nor conclusive. It was not until 1784 when Charles-Augustin de Coulomb, using a torsion balance, was able to definitively show through experiment that this was true. Soon after the discovery in 1820 by H. C. Ørsted that a magnetic needle is acted on by a voltaic current, André-Marie Ampère that same year was able to devise through experimentation the formula for the angular dependence of the force between two current elements. In all these descriptions, the force was always described in terms of the properties of the matter involved and the distances between two masses or charges rather than in terms of electric and magnetic fields.
The modern concept of electric and magnetic fields first arose in the theories of Michael Faraday, particularly his idea of lines of force, later to be given full mathematical description by Lord Kelvin and James Clerk Maxwell. From a modern perspective it is possible to identify in Maxwell's 1865 formulation of his field equations a form of the Lorentz force equation in relation to electric currents, however, in the time of Maxwell it was not evident how his equations related to the forces on moving charged objects. J. J. Thomson was the first to attempt to derive from Maxwell's field equations the electromagnetic forces on a moving charged object in terms of the object's properties and external fields. Interested in determining the electromagnetic behavior of the charged particles in cathode rays, Thomson published a paper in 1881 wherein he gave the force on the particles due to an external magnetic field as
Thomson derived the correct basic form of the formula, but, because of some miscalculations and an incomplete description of the displacement current, included an incorrect scale-factor of a half in front of the formula. Oliver Heaviside invented the modern vector notation and applied it to Maxwell's field equations; he also had fixed the mistakes of Thomson's derivation and arrived at the correct form of the magnetic force on a moving charged object. Finally, in 1895, Hendrik Lorentz derived the modern form of the formula for the electromagnetic force which includes the contributions to the total force from both the electric and the magnetic fields. Lorentz began by abandoning the Maxwellian descriptions of the ether and conduction. Instead, Lorentz made a distinction between matter and the luminiferous aether and sought to apply the Maxwell equations at a microscopic scale. Using Heaviside's version of the Maxwell equations for a stationary ether and applying Lagrangian mechanics, Lorentz arrived at the correct and complete form of the force law that now bears his name.

Trajectories of particles due to the Lorentz force

In many cases of practical interest, the motion in a magnetic field of an electrically charged particle can be treated as the superposition of a relatively fast circular motion around a point called the guiding center and a relatively slow drift of this point. The drift speeds may differ for various species depending on their charge states, masses, or temperatures, possibly resulting in electric currents or chemical separation.

Significance of the Lorentz force

While the modern Maxwell's equations describe how electrically charged particles and currents or moving charged particles give rise to electric and magnetic fields, the Lorentz force law completes that picture by describing the force acting on a moving point charge q in the presence of electromagnetic fields. The Lorentz force law describes the effect of E and B upon a point charge, but such electromagnetic forces are not the entire picture. Charged particles are possibly coupled to other forces, notably gravity and nuclear forces. Thus, Maxwell's equations do not stand separate from other physical laws, but are coupled to them via the charge and current densities. The response of a point charge to the Lorentz law is one aspect; the generation of E and B by currents and charges is another.
In real materials the Lorentz force is inadequate to describe the collective behavior of charged particles, both in principle and as a matter of computation. The charged particles in a material medium not only respond to the E and B fields but also generate these fields. Complex transport equations must be solved to determine the time and spatial response of charges, for example, the Boltzmann equation or the Fokker–Planck equation or the Navier–Stokes equations. For example, see magnetohydrodynamics, fluid dynamics, electrohydrodynamics, superconductivity, stellar evolution. An entire physical apparatus for dealing with these matters has developed. See for example, Green–Kubo relations and Green's function.

Lorentz force law as the definition of E and B

In many textbook treatments of classical electromagnetism, the Lorentz force Law is used as the definition of the electric and magnetic fields E and B. To be specific, the Lorentz force is understood to be the following empirical statement:
This is valid, even for particles approaching the speed of light. So the two vector fields E and B are thereby defined throughout space and time, and these are called the "electric field" and "magnetic field". The fields are defined everywhere in space and time with respect to what force a test charge would receive regardless of whether a charge is present to experience the force.
As a definition of E and B, the Lorentz force is only a definition in principle because a real particle would generate its own finite E and B fields, which would alter the electromagnetic force that it experiences. In addition, if the charge experiences acceleration, as if forced into a curved trajectory by some external agency, it emits radiation that causes braking of its motion. See for example Bremsstrahlung and synchrotron light. These effects occur through both a direct effect and indirectly. Moreover, net force must include gravity, electroweak, and any other forces aside from electromagnetic force.

Force on a current-carrying wire

When a wire carrying an electric current is placed in a magnetic field, each of the moving charges, which comprise the current, experiences the Lorentz force, and together they can create a macroscopic force on the wire. By combining the Lorentz force law above with the definition of electric current, the following equation results, in the case of a straight, stationary wire:
where ℓ is a vector whose magnitude is the length of wire, and whose direction is along the wire, aligned with the direction of conventional current charge flow I.
If the wire is not straight but curved, the force on it can be computed by applying this formula to each infinitesimal segment of wire dℓ, then adding up all these forces by integration. Formally, the net force on a stationary, rigid wire carrying a steady current I is
This is the net force. In addition, there will usually be torque, plus other effects if the wire is not perfectly rigid.
One application of this is Ampère's force law, which describes how two current-carrying wires can attract or repel each other, since each experiences a Lorentz force from the other's magnetic field. For more information, see the article: Ampère's force law.

EMF

The magnetic force component of the Lorentz force is responsible for motional electromotive force, the phenomenon underlying many electrical generators. When a conductor is moved through a magnetic field, the magnetic field exerts opposite forces on electrons and nuclei in the wire, and this creates the EMF. The term "motional EMF" is applied to this phenomenon, since the EMF is due to the motion of the wire.
In other electrical generators, the magnets move, while the conductors do not. In this case, the EMF is due to the electric force term in the Lorentz Force equation. The electric field in question is created by the changing magnetic field, resulting in an induced EMF, as described by the Maxwell–Faraday equation.
Both of these EMFs, despite their apparently distinct origins, are described by the same equation, namely, the EMF is the rate of change of magnetic flux through the wire. Einstein's special theory of relativity was partially motivated by the desire to better understand this link between the two effects. In fact, the electric and magnetic fields are different facets of the same electromagnetic field, and in moving from one inertial frame to another, the solenoidal vector field portion of the E-field can change in whole or in part to a B-field or vice versa.

Lorentz force and Faraday's law of induction

Given a loop of wire in a magnetic field, Faraday's law of induction states the induced electromotive force in the wire is:
where
is the magnetic flux through the loop, B is the magnetic field, Σ is a surface bounded by the closed contour ∂Σ, at time t, dA is an infinitesimal vector area element of Σ.
The sign of the EMF is determined by Lenz's law. Note that this is valid for not only a stationary wirebut also for a moving wire.
From Faraday's law of induction and the Maxwell Equations, the Lorentz Force can be deduced. The reverse is also true, the Lorentz force and the Maxwell Equations can be used to derive the Faraday Law.
Let Σ be the moving wire, moving together without rotation and with constant velocity v and Σ be the internal surface of the wire. The EMF around the closed path ∂Σ is given by:
where
is the electric field and dℓ is an infinitesimal vector element of the contour ∂Σ.
NB: Both dℓ and dA have a sign ambiguity; to get the correct sign, the right-hand rule is used, as explained in the article Kelvin–Stokes theorem.
The above result can be compared with the version of Faraday's law of induction that appears in the modern Maxwell's equations, called here the Maxwell–Faraday equation:
The Maxwell–Faraday equation also can be written in an integral form using the Kelvin–Stokes theorem.
So we have, the Maxwell Faraday equation:
and the Faraday Law,
The two are equivalent if the wire is not moving. Using the Leibniz integral rule and that div B = 0, results in,
and using the Maxwell Faraday equation,
since this is valid for any wire position it implies that,
Faraday's law of induction holds whether the loop of wire is rigid and stationary, or in motion or in process of deformation, and it holds whether the magnetic field is constant in time or changing. However, there are cases where Faraday's law is either inadequate or difficult to use, and application of the underlying Lorentz force law is necessary. See inapplicability of Faraday's law.
If the magnetic field is fixed in time and the conducting loop moves through the field, the magnetic flux ΦB linking the loop can change in several ways. For example, if the B-field varies with position, and the loop moves to a location with different B-field, ΦB will change. Alternatively, if the loop changes orientation with respect to the B-field, the differential element will change because of the different angle between B and dA, also changing ΦB. As a third example, if a portion of the circuit is swept through a uniform, time-independent B-field, and another portion of the circuit is held stationary, the flux linking the entire closed circuit can change due to the shift in relative position of the circuit's component parts with time. In all three cases, Faraday's law of induction then predicts the EMF generated by the change in ΦB.
Note that the Maxwell Faraday's equation implies that the Electric Field E is non conservative when the Magnetic Field B varies in time, and is not expressible as the gradient of a scalar field, and not subject to the gradient theorem since its rotational is not zero.

Lorentz force in terms of potentials

The E and B fields can be replaced by the magnetic vector potential A and electrostatic potential ϕ by
where ∇ is the gradient, ∇⋅ is the divergence, ∇× is the curl.
The force becomes
Using an identity for the triple product this can be rewritten as,
. Using the chain rule, the total derivative of is:
so that the above expression becomes:
With v = ẋ, we can put the equation into the convenient Euler–Lagrange form
where
and

Lorentz force and analytical mechanics

The Lagrangian for a charged particle of mass m and charge q in an electromagnetic field equivalently describes the dynamics of the particle in terms of its energy, rather than the force exerted on it. The classical expression is given by:
where A and ϕ are the potential fields as above. The quantity can be thought as a velocity-dependent potential function. Using Lagrange's equations, the equation for the Lorentz force given above can be obtained again.
The total potential energy is then:
and the kinetic energy is:
hence the Lagrangian:
Lagrange's equations are
. So calculating the partial derivatives:
equating and simplifying:
and similarly for the y and z directions. Hence the force equation is:
The potential energy depends on the velocity of the particle, so the force is velocity dependent, so it is not conservative.
The relativistic Lagrangian is
The action is the relativistic arclength of the path of the particle in space time, minus the potential energy contribution, plus an extra contribution which quantum mechanically is an extra phase a charged particle gets when it is moving along a vector potential.
The equations of motion derived by extremizing the action :
are the same as Hamilton's equations of motion:
both are equivalent to the noncanonical form:
This formula is the Lorentz force, representing the rate at which the EM field adds relativistic momentum to the particle.

Relativistic form of the Lorentz force

Covariant form of the Lorentz force

Field tensor

Using the metric signature, the Lorentz force for a charge q can be written in covariant form:
where pα is the four-momentum, defined as
τ the proper time of the particle, Fαβ the contravariant electromagnetic tensor
and U is the covariant 4-velocity of the particle, defined as:
in which
is the Lorentz factor.
The fields are transformed to a frame moving with constant relative velocity by:
where Λμα is the Lorentz transformation tensor.

Translation to vector notation

The component of the force is
Substituting the components of the covariant electromagnetic tensor F yields
Using the components of covariant four-velocity yields
The calculation for, 3 yields similar results, so collecting the 3 equations into one:
and since differentials in coordinate time dt and proper time dτ are related by the Lorentz factor,
so we arrive at
This is precisely the Lorentz force law, however, it is important to note that p is the relativistic expression,

Lorentz force in spacetime algebra (STA)

The electric and magnetic fields are dependent on the velocity of an observer, so the relativistic form of the Lorentz force law can best be exhibited starting from a coordinate-independent expression for the electromagnetic and magnetic fields , and an arbitrary time-direction,. This can be settled through Space-Time Algebra, a type of Clifford's Algebra defined on a pseudo-Euclidean space, as
and
is a space-time bivector, which has six degrees of freedom corresponding to boosts and rotations. The dot product with the vector pulls a vector from the translational part, while the wedge-product creates a trivector who is dual to a vector which is the usual magnetic field vector.
The relativistic velocity is given by the changes in a time-position vector, where
and the velocity is
The proper form of the Lorentz force law is simply
Note that the order is important because between a bivector and a vector the dot product is anti-symmetric. Upon a space time split like one can obtain the velocity, and fields as above yielding the usual expression.

Lorentz force in general relativity

In the general theory of relativity the equation of motion for a particle with mass and charge, moving in a space with metric tensor and electromagnetic field, is given as
where ,, and.
The equation can also be written as
where is the Christoffel symbol, or as
where is the covariant differential in general relativity.

Applications

The Lorentz force occurs in many devices, including:
In its manifestation as the Laplace force on an electric current in a conductor, this force occurs in many devices including: