Poynting vector


In physics, the Poynting vector represents the directional energy flux of an electromagnetic field. The SI unit of the Poynting vector is the watt per square metre. It is named after its discoverer John Henry Poynting who first derived it in 1884. Oliver Heaviside also discovered it independently in the more general form that recognises the freedom of adding the curl of an arbitrary vector field to the definition.

Definition

In Poynting's original paper and in many textbooks, the Poynting vector is defined as
where bold letters represent vectors and
This expression is often called the Abraham form. The Poynting vector is usually denoted by S or N.
In the "microscopic" version of Maxwell's equations, this definition must be replaced by a definition in terms of the electric field E and the magnetic field B.
It is also possible to combine the electric displacement field D with the magnetic field B to get the Minkowski form of the Poynting vector, or use D and H to construct yet another version. The choice has been controversial: Pfeifer et al. summarize and to a certain extent resolve the century-long dispute between proponents of the Abraham and Minkowski forms.
The Poynting vector represents the particular case of an energy flux vector for electromagnetic energy. However, any type of energy has its direction of movement in space, as well as its density, so energy flux vectors can be defined for other types of energy as well, e.g., for mechanical energy. The Umov–Poynting vector discovered by Nikolay Umov in 1874 describes energy flux in liquid and elastic media in a completely generalized view.

Interpretation

The Poynting vector appears in Poynting's theorem, an energy-conservation law:
where Jf is the current density of free charges and u is the electromagnetic energy density for linear, nondispersive materials, given by
where
The first term in the right-hand side represents the electromagnetic energy flow into a small volume, while the second term subtracts the work done by the field on free electrical currents, which thereby exits from electromagnetic energy as dissipation, heat, etc. In this definition, bound electrical currents are not included in this term, and instead contribute to S and u.
For linear, nondispersive and isotropic materials, the constitutive relations can be written as
where
Here ε and μ are scalar, real-valued constants independent of position, direction, and frequency.
In principle, this limits Poynting's theorem in this form to fields in vacuum and nondispersive linear materials. A generalization to dispersive materials is possible under certain circumstances at the cost of additional terms.

Formulation in terms of microscopic fields

The "microscopic" version of Maxwell's equations admits only the fundamental fields E and B, without a built-in model of material media. Only the vacuum permittivity and permeability are used, and there is no D or H. When this model is used, the Poynting vector is defined as
where
This is actually the general expression of the Poynting vector. The corresponding form of Poynting's theorem is
where J is the total current density and the energy density u is given by
where ε0 is the vacuum permittivity.
It can be derived directly from Maxwell's equations in terms of total charge and current and the Lorentz force law only.
The two alternative definitions of the Poynting vector are equal in vacuum or in non-magnetic materials, where. In all other cases, they differ in that and the corresponding u are purely radiative, since the dissipation term covers the total current, while the E × H definition has contributions from bound currents which are then excluded from the dissipation term.
Since only the microscopic fields E and B occur in the derivation of, assumptions about any material present are completely avoided, and Poynting vector and theorem are universally valid, in vacuum as in all kinds of material. This is especially true for the electromagnetic energy density, in contrast to the "macroscopic" form.

Time-averaged Poynting vector

The above form for the Poynting vector represents the instantaneous power flow due to instantaneous electric and magnetic fields. More commonly, problems in electromagnetics are solved in terms of sinusoidally varying fields at a specified frequency. The results can then be applied more generally, for instance, by representing incoherent radiation as a superposition of such waves at different frequencies and with fluctuating amplitudes.
We would thus not be considering the instantaneous E and H used above, but rather a complex amplitude for each which describes a coherent wave's phase using phasor notation. These complex amplitude vectors are not functions of time, as they are understood to refer to oscillations over all time. A phasor such as is understood to signify a sinusoidally varying field whose instantaneous amplitude E follows the real part of where ω is the frequency of the sinusoidal wave being considered.
In the time domain it will be seen that the instantaneous power flow will be fluctuating at a frequency of 2ω. But what is normally of interest is the average power flow in which those fluctuations are not considered. In the math below, this is accomplished by integrating over a full cycle. The following quantity, still referred to as a "Poynting vector", is expressed directly in terms of the phasors as:
where ∗ denotes the complex conjugate. The time-averaged power flow is then given by the real part of. The imaginary part is usually ignored, however it signifies "reactive power" such as the interference due to a standing wave or the near field of an antenna. In a single electromagnetic plane wave, E and H are exactly in phase, so is simply a real number according to the above definition.
The equivalence of to the time-average of the instantaneous Poynting vector S can be shown as follows.
The average of the instantaneous Poynting vector S over time is given by:
The second term is the double-frequency component having an average value of zero, so we find:
According to some conventions the factor of 1/2 in the above definition may be left out. Multiplication by 1/2 is required to properly describe the power flow since the magnitudes of and refer to the peak fields of the oscillating quantities. If rather the fields are described in terms of their root mean square values, then the correct average power flow is obtained without multiplication by 1/2.

Examples and applications

Coaxial cable

For example, the Poynting vector within the dielectric insulator of a coaxial cable is nearly parallel to the wire axis. Electrical energy delivered to the load is flowing entirely through the dielectric between the conductors. Very little energy flows in the conductors themselves, since the electric field strength is nearly zero. The energy flowing in the conductors flows radially into the conductors and accounts for energy lost to resistive heating of the conductor. No energy flows outside the cable either, since there the magnetic fields of inner and outer conductors cancel to zero.

Resistive dissipation

If a conductor has significant resistance, then, near the surface of that conductor, the Poynting vector would be tilted toward and impinge upon the conductor. Once the Poynting vector enters the conductor, it is bent to a direction that is almost perpendicular to the surface. This is a consequence of Snell's law and the very slow speed of light inside a conductor. The definition and computation of the speed of light in a conductor can be given. Inside the conductor, the Poynting vector represents energy flow from the electromagnetic field into the wire, producing resistive Joule heating in the wire. For a derivation that starts with Snell's law see Reitz page 454.

Plane waves

In a propagating sinusoidal linearly polarized electromagnetic plane wave of a fixed frequency, the Poynting vector always points in the direction of propagation while oscillating in magnitude. The time-averaged magnitude of the Poynting vector is found as above to be:
where Em is the complex amplitude of the electric field and η is the characteristic impedance of the transmission medium, or just η0 377Ω for a plane wave in free space. This directly follows from the above expression for the average Poynting vector using phasor quantities, and the fact that in a plane wave the magnetic field is equal to the electric field divided by η.
In optics, the time-averaged value of the radiated flux is technically known as the irradiance, more often simply referred to as the intensity.

Radiation pressure

The density of the linear momentum of the electromagnetic field is S/c2 where S is the magnitude of the Poynting vector and c is the speed of light in free space. The radiation pressure exerted by an electromagnetic wave on the surface of a target is given by

Static fields

The consideration of the Poynting vector in static fields shows the relativistic nature of the Maxwell equations and allows a better understanding of the magnetic component of the Lorentz force,. To illustrate, the accompanying picture is considered, which describes the Poynting vector in a cylindrical capacitor, which is located in an H field generated by a permanent magnet. Although there are only static electric and magnetic fields, the calculation of the Poynting vector produces a clockwise circular flow of electromagnetic energy, with no beginning or end.
While the circulating energy flow may seem nonsensical or paradoxical, it is necessary to maintain conservation of momentum. Momentum density is proportional to energy flow density, so the circulating flow of energy contains an angular momentum. This is the cause of the magnetic component of the Lorentz force which occurs when the capacitor is discharged. During discharge, the angular momentum contained in the energy flow is depleted as it is transferred to the charges of the discharge current crossing the magnetic field.

Adding the curl of a vector field

The Poynting vector occurs in Poynting's theorem only through its divergence, that is, it is only required that the surface integral of the Poynting vector around a closed surface describe the net flow of electromagnetic energy into or out of the enclosed volume. This means that adding a solenoidal vector field to S will result in another field which satisfies this required property of a Poynting vector field according to Poynting's theorem. Since the divergence of any curl is zero, one can add the curl of any vector field to the Poynting vector and the resulting vector field S' will still satisfy Poynting's theorem.
However the theory of special relativity, in which energy and momentum are defined locally and invariantly via the stress–energy tensor, shows that the above-given expression for the Poynting vector is unique.