MV Agusta


MV Agusta is a motorcycle manufacturer founded by Count Domenico Agusta on 19 January 1945 as one of the branches of the Agusta aircraft company near Milan in Cascina Costa, Italy. The abbreviation MV stands for Meccanica Verghera, the hamlet where the first MVs were made. The modern headquarters and main production facilities are located in Varese, Italy on the shore of Lake Varese.

History

1943—1945: From idea to mass production

It all began in the early years of the 20th century, when Count Giovanni Agusta left Sicily for northern Italy, where he built his first aircraft, the AG.1, four years after the Wright brothers had made history in the US. The First World War, which demonstrated the prospects of aviation, prompted the count to act decisively — and in 1923, in the town of Samarate, he founded the Costruzioni Aeronautiche Giovanni Agusta S.A. aircraft factory. However, in 1927, at the age of 48, he dies and leaves his life's work to his wife Giuseppina and sons, Domenico, Vincenzo, Mario and Corrado.
Aircraft orders were plentiful, and business generally went well until World War II intervened. In 1945, following the provisions of the peace treaty after the war, which were later reiterated in the Paris Peace Treaties, 1947, the production of aircraft was forbidden to Italy, and the Agusta family had to think quick to save their high-tech business and keep their employees in work.
In the midst of World War II Count Domenico Agusta came to the idea that the best way to diversify the business and turn it into a peaceful channel would be to create a motorcycle production. Moreover, he understood that a country gutted by war would need a simple, cheap and efficient machine. Therefore, by August 1943, the engine was ready: a 98 cc single-cylinder two-stroke with two-stage gear box. And even if the total shortage of spare parts had to resort to the services of the black market, the process was already launched — and on January 19, 1945, in the town of Cascina Costa, a private company Meccanica Verghera S.r.l. was registered, and in the fall of the same year the first motorcycle was presented.
At a dealership on Via Piatti in Milan in late October 1945, the press saw a pre-production model of a light motorcycle with a steel tube rigid frame, a girder fork and 19-inch wheels. The gas tank was marked with large letters M and V. It was called "Vespa 98". However Domenico had had to refuse from the spectacular name Vespa : by that time it was occupied by Piaggio for its Vespa motorscooter. Therefore, in 1946, the motorcycle was put ro mass production as MV 98 and in two versions: Economica and Turismo. The Turismo version proved to be so overwhelmingly popular that before long the Economica version was discontinued. In 1946, about 50 units were produced.

1945—1980: Agusta family period

Count Domenico Agusta had a passion for mechanical workings and for motorcycle racing. Much like Enzo Ferrari, the Agusta family produced and sold motorcycles almost exclusively to fund their racing efforts. So soon after the start of production of its first model MV 98, the company launched its own factory racing program.
The date of the first MV Agusta race is unknown, but the first victory was delivered by Vicenzo Nincioni in the road race held in La Spezia on October 6, 1946. Just a week later, he took the third place in Valenza, where the first place was also taken by the MV racer Mario Cornalea. On November 3, in Monza, MV racers Vicenzo Ninconi, Mario Cornalea and Mario Paleari occupied the entire podium first time in MV racing history.
In the end of 1946, a special racing motorcycle was assembled at the factory in Caschina Costa. Its main advantages over the serial model 98 were a telescopic fork and a plunger type rear suspension. The frame remained a simple tubular and was shortened by 50 mm to improve the handling. The handle bar was narrowed and the rearsets were moved back to make a sportier riding position. The two-stroke engine was improved by enlarging the cylinders ports, raising the compression ratio and installing a new 20 mm horizontal carburetor. The number of gears was increased from 2 to 3. As a result, the power increased to 5 hp at 5,400 rpm, and the maximum speed increased to 95 km/h.
Soon almost all of these improvements were also applied on the production model MV 98. By that time, the capacity of 98 cc was no longer relevant in racing world, which had become more organized and moved on to the classic 125, 250 and 500 cc categories.
In 1947, MV Agusta went to the Milan Trade Fair with a number of new features. In addition to a “Luxury” version of the 98, the two-cylinder, two-stroke 125 cc bikes and the 250 cc single-cylinder 4T bikes appeared.
Technical characteristics of the MV Agusta 250 Turismo were regular for those times. Its single-cylinder engine with compression ratio 6.0:1 produced 11 hp at 4,700 rpm allowing the motorcycle to speed up to 110 km/h. Only 100 units of the MV 250 Turismo were produced within three years.
The model with a 125cc two-stroke twin engine had a very similar design to the MV 98. The only differences were a four-speed gearbox and actually two cylinders instead of one. This model was well received by the press as well as by the audience of many motorcycles shows. However this model didn’t go to serial production mainly because its high price. Instead of this model MV Agusta launched a more affordable 125 Turismo, which was the result of the development of the original MV 98. It was powered by a 123.5 cc single-cylinder engine shoving out 4.8 hp and equipped by a girder fork.
Together with the 125 Turismo, MV introduced 125 Corsa designed for national and world championships. The power increased up to 9 hp. Its steel trellis frame, fabricated from thinner tubing, helped to reduce the weight from 75 to 55 kg. Two friction dampers had been added. And both wheels were replaced with 21-inch ones in accordance with the technical regulations of the races.
The bike was good enough to help Franco Bertoni to win the 1948 Grand Prix of Nations at Monza. In the 1949 season, the 125 cc, or ultra-light weight class, gained new prestige. More motorcycle manufacturers were competing in the inaugural world championships that were held in Switzerland, Netherlands and Italy. The Mondial 125 cc DOHC design dominated the 1949 season.
In the end of 1949, Count Domenico Agusta invited two key professionals from Gilera — Piero Remor, who designed Gilera's four-cylinder 500cc racing motorcycle, and Arturo Magni, who was the chief mechanic of the Gilera's racing team. So they repeated a 500 cc four-cylinder engine and designed a racing model with 125 cc DOHC single-cylinder engine. The MV’s first 500 — a Gilera clone — made its race debut at Spa-Francorchamps in July 1950, just six months after Remor had put pen to paper in MV’s Cascina Costa race shop. After a short twenty-minute run on the factory test bench, ex-Gilera rider Arcisco Artesiani managed a creditable fifth on the untested and ungainly MV 500. His race average speed of 160.66 km/h was impressive, but the remainder of the season proved difficult and the MV failed to live up to expectations. Artesiani’s third place at Monza in the Nations Grand Prix was the highlight of the 1950 season, and Artesiani finished eighth overall in the World Championship.
The MV’s first racing success came later with the 125cc DOHC four-stroke engine. The 1950 season and 1951 season were development years. Racing efforts only produced a fifth-place finish at the Dutch TT in 1950. The 1951 results were only slightly better. The 1952 season saw the introduction of telescopic forks, full width alloy brake hubs and a sleek fuel tank on the 125 cc race bike. Britain's Cecil Sandford piloted the new MV 125 to a 1952 Isle of Man TT victory and went on to win MV Agusta's first world championship. And in September that year Leslie Graham made Count Agusta the happiest man alive by winning MV’s first 500 cc Grand Prix, on the hallowed asphalt of Monza, beating Gilera’s Umberto Masetti by 58 seconds. Giuseppe Commendatore Gilera was so incensed that he lodged a protest, claiming MV’s engine was oversize. It wasn’t.
In 1952, the Agusta factory started building helicopters under licence to American manufacturer Bell. And aviation once again became fundamental to the Count’s business. Although MV Agusta continued to sell small numbers of exotic road bikes, from this moment on racing was a hobby for Count Domenico. Helicopters made him a fortune, which he spent on racing. Aviation technology also served him well on the racetrack. His Grand Prix bikes were constructed using the same high-tech casting, forging and machining techniques used in the manufacture of his helicopters.
At that time MV product line-up consisted of motorcycles and scooters with two-stroke engines, with a capacity from 98 to 150 cc. But people who lived in mountainous areas always preferred four-stroke engines because of their torque. So Remor was tasked to design a four-stroke road model.
At the end of 1952, the MV Agusta 175 was released in two versions: CST and CSTL. It was their first production machine with a four-stroke engine. The unit construction single-cylinder engine was designed with an overhead camshaft for high performance. The chain-driven camshaft operated the valves via rocker arms, which were closed by hairpin valve springs. The engine was inclined forward at 10° and manufactured in alloy and a bore and stroke of 59.5 × 62 mm. This model had a frame of a double loop design using tubes for the front sections and pressed steel members at the real. The engine was used as a stressed member. Suspension was telescopic forks at the front and a swinging arm at the rear. The 175 CST was equipped with separate saddles and 17" wheels, the CSTL had 19" wheels and a "long seat" fitted. The 175 CST weighed 103 kg and figured top speed of 100 km/h.
In less than a year MV Agusta introduced a sportier version 175 CS with a larger carburetor, a higher compression ratio, a larger cylinder head with bigger fins, aluminum wheel rims and plenty of glossy red paint. Its 175 cc one-cylinder engine produced 11 hp at 6700 rpm, giving a 115 km/h top speed. This model featured lower handlebars, a more sporty riding position and a beautifully sculpted fuel tank that quickly earned it the unofficial nickname "Disco Volante" as, viewed from the front, the tank shape was reminiscent of a flying saucer.
In July 1954, MV began offering a very limited-availability racing model 175 CSS. The engine was further turned from the CS model, including higher compression ratio and a larger carburetor, to produce 15 hp at 8,800 rpm. Cycle parts were the same as the CS model, except it was fitted with Earles forks.
In 1955, MV Agusta designed the 175 CSS-5V for the 175 cc Formula Sport Derivata race series. The “Squalo”, as it was generally known, had a lighter frame based on that used on the works racers, larger brakes, a magneto, Earles forks and a five-speed gearbox. The bike became the part of motorcycle racing history thanks to the first victory of young Mike Hailwood, the future nine-time world champion. Mike won his first ever race on one of these machines bored out to 196 cc in a 200 cc class race at Oulton Park in 1957. Around 200 of the model were manufactured between 1954 and 1957.
The 175 cc engine became famous not only in road racing. From 1955 to 1958, MV also produced off-road racing motorcycles. But, perhaps, the most unexpected option manufactured in the same years was the trike Motocarro with a load capacity of 300 kg.
Unfortunately the 175 cc family had a considerable drawback. In fact, the flip side of its advantages. After all, the motorcycle was designed by the racing engineer, who spent the best part of his life following the rule brilliantly formulated by Ferdinand Porsche: "The perfect racing car crosses the finish line first and subsequently falls into its component parts”. Four-stroke 175 cc MV Agusta engines were distinguished by excellent dynamics at that time, but not durability. They were even given the nickname “Fragile Diamonds”. In addition, the upper camshaft complicated the procedure for cleaning carbon deposits, which was required several times a season due to the quality of oil and fuel. Therefore, for the new 125cc motorcycle, which was supposed to replace two-stroke models, a simplified version of the four-stroke engine was developed, with pushrods operating the valves.
The model debuted in 1954 in two versions: Turismo Rapido and Rapido Sport. The chassis was similar to the 175 cc models, but a radical improvement appeared on the Rapido Sport was a hydraulically damped telescopic fork.
Now Italian engineers were ready to take the next step: to increase capacity up to 250 cc. In the fall of 1956, the company introduced the 250 Raid. Its name seemed to hint: the toys were over, it was time to go on a long journey — at least across Europe. Technically, the motorcycle became the development of a 125 cc model: a single-cylinder four-stroke overhead valve engine, a four-speed gearbox, a duplex frame closed through the crankcase of the power unit. Of course, everything was done much more solidly, so the dry weight of the motorcycle increased from 102 to 160 kg. As a result, 14 hp engine could hardly power this bike to 115 km/h. In addition, the motorcycle looked like a clone of the junior models, with no hints of its high status. All of that generated low demand. In 1959, in an attempt to recover the poor sales of the 250, the company introduced a 16 hp 300 cc version. Army and police purchased a small number of these motorcycles in respective versions, but the overall sales were far from brilliant. As a result, the success hoped for was not realized with only 544 250 cc machines and about 500 300 cc machines being produced.
Trying to completely rid the brand of the dubious fame of “fragile diamonds”, the company's engineers completely redesigned the lubrication system by the 1959 season: they installed a high-performance oil pump, a centrifugal oil filter, and increased the volume of the pan. The main new MV Agusta 125 TRE advertising message was focused on its reliability and assured 100,000 km mileage without any problems, for which the model was nicknamed "Centomila".
In 1958, responding to the new Italian Road Law, which closed highways for motorcycles of 125 cc or less, the company released a 150 cc version of the MV Agusta 150 RS. Its 10 hp engine accelerating the motorcycle up to 110 km/h, allowed it to stay in the stream. The same engine, detuned to 7 hp, was also installed on the small three-wheeled scooter Centauro. This machine with a load capacity of 350 kg already had a cab.
In 1957, MV produced a cheaper version of the 175 cc engine with a camshaft located in the engine block. Later in 1959, this engine bored up to 232 cc became a heart of a new motorcycle — Tevere. In fact, the 11 hp Tevere was a more dynamic and less affordable version of MV Agusta 150 RS, so the model was discontinued soon. But the 232 cc engine itself, equipped with forced cooling, was produced until 1968, to complete the Trasporto Tevere cargo scooter.
A new family of ultralight Checca motorcycles debuted in 1960 to replace the Ottantatrè model. Technically Checca was similar to the 125 cc Centomila, but with a scaled parts. The basic version GT was equipped with an 83 cc 4 hp engine, an upper level GTE version had a 99 cc 5.15 hp engine and the Sport version had a 99 cc 6.5 hp engine. In 1962, the family was supplemented the GTL version with a 125 cc 5.5 hp engine. The family was in production for totally 9 years, however it had no big commercial success.
The 1958 Italian Road Law defined a new category "ciclomotore": a two- or three-wheeled vehicle with engine capacity 50 cc or less and speed 40 km/h or less. Italian motorcycle industry saw in the new law an opportunity to attract younger riders’ audience. MV Agusta from its side presented Liberty family in 1962. In fact, it was the same Checca, but even more lightweight and simplified, with a 47.7 cc 1.5 hp engine at 4,500 rpm. An interesting fact that sales of the Liberty Sport version significantly exceeded the sales of the basic Liberty Turismo.
After the 1957 season, the Italian motorcycle manufacturers Gilera, Moto Guzzi and Mondial jointly agreed to withdraw from Grand Prix competition due to escalating costs and diminishing sales. Count Agusta originally agreed to withdraw, but then had second thoughts. MV Agusta went on to dominate Grand Prix racing, winning 17 consecutive 500 cc world championships. Count Agusta's competitive nature drove him to hire some of the best riders of the time, including Carlo Ubbiali, John Surtees, Mike Hailwood, Giacomo Agostini, Phil Read, and the best engineers, in particular Arturo Magni. The three- and four-cylinder race bikes were known for their excellent road handling. The fire-engine red racing machines became a hallmark of Grand Prix racing in the 1960s and early 1970s.
In the early 1960s, MV Agusta decided to return to offroad sport. A new 125 Regolarita was created by order of Fiamme Oro team. The model was equipped with a 125 cc engine boosted up to 12.5 hp and a five-speed gearbox. Traditionally light MV frame was reinforced with a lower subframe, becoming closed. 19-inch wheels got offroad tyres. This motorcycle became successful, so tens such motorcycles were also sold amateur racers. Moreover, a five-speed gearbox has become standard for 125 cc and 150 cc road motorcycles since 1966, the factory line-up was supplemented by the Scrambler version.
The main MV premiere at the 1965 EICMA Milan Motorcycle Show was the flagship model 600 with an inline-four 590 cc engine. Such significant novelty put the all new two-cylinder line-up on the background. Most probably it happened also because of the new two-cylinder motorcycles had a regular look, very similar to the previous motorcycles.
The MV Agusta 250 B had a 247 cc four-stroke parallel twin engine, a battery ignition system, two carburetors and a five-speed gearbox. Its 19 hp were enough to achieve 135 km/h. But the price was too high, and the characteristics were not the most impressive, which is why by the end of 1970 the total number of released three versions barely reached 1,452 units, and the model gave way to another generation, a much more successful MV Agusta 350 B with engine bored out to 349 cc.
Motorcycles MV Agusta became more advanced, with modern electrical equipment and improved suspensions. At the same time MV Agusta kept the look of its motorcycles almost unchanged. Meanwhile, the 1960s became a turning point in motorcycle design world, and other Italian companies set new design excellence standards not supported by MV Agusta with its motorcycles' look "from the 1950s". The first significant design improvement became only in 1970, however it was not well accepted by customers and the second change became in 1971. The changes included elongated gas tanks, front forks without covers, low handlebars, saddles with a “hump”.
The new MV Agusta 125 Sport entered the market in 1974. Now, the design was one step ahead! The straightened lines that were just coming into fashion reflected the trend set a year earlier by the prototype MV Agusta 350 Ipotesi. Even the fins and the crankcase got square-shape. Some of the motorcycles were equipped with a Grand Prix type fairing. Technical advantages included fully enclosed, fully tubular duplex frame, front disc brake and electronic ignition system.
Alas, it was the last development of one- and two-cylinder motorcycles. The heirs of Domenico Agusta did not have passion to the motorcycle business and it declined soon. The last MV motorcycle manufactured in the company's old factory was 125 Sport in 1977.

Spanish production

Count Agusta had plans to expand the MV Agusta brand internationally. In post-Civil War Spain, the Franco regime banned the import of motorcycles and also forbade foreign nationals from settling in Spain, or stating a business there. Brothers Mario and Natale Corando and financiers Enrique Favier and Antonio Sommariva wanted to set up manufacture of MV machines under licence by a local factory, which had licenses and manufacturing permits and therefore have access to raw materials. A deal was struck with Nilo Masó of Alpha in Barcelona and MV Alpha was formed in 1948.
Sales were good, but because of the limited facilities of Alpha, production could not be increased. The licence to produce MV motorcycles was transferred to the larger and better equipped Avello factory in the Natahoyo neighbourhood of Gijón in Asturias in 1951, creating the MV Avello brand. Production in Spain continued until 1972.

1967—1974: World’s first production 4-cylinder motorcycles

have always been a characteristic feature of MV Agusta. For the first time this type of engine designed by Pierro Remor was used in the 1950 Grand Prix season. In the mid-1960s, when the demand for large engine capacity motorcycles grew, there was born an idea to apply it on a road bike. It was rumored that preventing any competition Count Agusta ordered to build the road vehicle with no possibility of convertation it into a racing one. Therefore, the MV Agusta 600 debuted at the Milan Trade Fair in 1965 was deliberately distinguished by the massive parts of the 592 cc engine, final shaft drive and weighed 221 kg. It became the world's first production motorcycle with a transverse 4-cylinder engine.
It was followed by models with engines with a displacement of 743, 790, 837 and 862 cm³, including the legendary 750 Sport and 750 Sport America. Even when the company canceled motorcycle production in 1977, Arturo Magni was authorized to produce and sell motorcycles under the MV Agusta brand on its own. The most advanced model, the 1978 Grand Prix 1100, developed 119 hp, weighed only 202 kg and accelerated from 0–100 km/h in 3.9 sec.
The history of the 750 S America model began when Chris Garville and Jim Cotherman of Commerce Overseas Corporation, the US MV importers, got the idea that with a few modifications, the MV 750 S had great potential in the United States. In the autumn of 1974, they travelled to Italy to discuss these upgrades which were rather well received by Cascina Costa. Result-oriented, the two American businessmen called for an improved design and performance and announced that they could sell hundreds of this new machine.
In terms of style, the 750 Sport America features a sporty look reminiscent of a "Luxury Café Racer". It was equipped with a 19-litre fuel tank, a small racing mudguard, a single-seater covered in black alcantara fabric and four exhausts. In terms of performance, the engine's displacement was increased to 790 cc and is now powered by four 26 mm Dell'Orto concentric-shaft carburettors. The buyer could either choose four chrome-plated megaphones or else, exhausts with a matt black finish producing a more acceptable noise level.
With a compression ratio of 9.5:1, the four-cylinder produced 75 hp and could take the 750 America to nearly 210 km/h at 8,500 rpm. The America was equipped with a 38 mm Ceriani front fork and a double disc at the front similar to that of the last 750 S.
However, the dealers' hopes did not materialize: there were few customers ready to pay $6,500 for 750 Sport America and only 540 units were produced.

1973—1977: Revolutionary 350 cc

MV Agusta 350 S Ipotesi was an example of a car designer's experience in a motorcycle world. It was in production for only two years, and 1,991 units were made. But this happened most probably due to the change of business focuses of the company after Count Domenico Agusta's death. Anyway the design of the MV Agusta 350 S has become decisive in the industry for the next 15 years. While almost all motorcycle designers were focused on round shapes, MV Agusta presented at 1973 Milan Motorcycle Show a prototype 350 Ipotesi that was characterised by horizontal lines and sharp angles. It was designed by Giorgetto Giugiaro, founder of Italdesign. The bike used cast alloy wheels and triple disc brakes which were a significant innovation for that time.
Two years later this model named 350 S went into production. It kept even the squared external cases of the engine, despite the fact that the basic motor internals were identical to the previous 350 twin model. Output was increased from 27 hp at 7800 rpm to 34 hp at 8500 rpm claimed.

1946—1977: Experiments, concepts and non-standard vehicles

MV Agusta is famous by its experiments and expands of the range. In 1949, the company launched production of scooters. From 1955 till 1969, MV produced mopeds. In 1975, the company presented the Mini Moto 4 V that looked like MV racing bikes but it had a 50 cc engine with 1.5 hp only.
The two seater car Vetturetta 350, presented in 1953, was designed by Pierro Remor to demonstrate the potential of the young company. Of course it has never been brought to market. Now it’s part of a motoring exhibition at the MV Agusta Museum.
But MV Agusta also produced lightweight commercial vehicles that were actively sold and used.
The first production three-wheeled delivery truck appeared in 1947 and had the same 98 cc single-cylinder two-stroke engine as that used in MV 98. It was an odd-looking vehicle with a wooden front-loading bed and a steering wheel. In 1948, several commercial MVs came with a 125 cc two-stroke single-cylinder engine with a three-speed gearbox. In 1949, this engine was replaced with the new four-speed 125 cc.  
The second edition of the MV Agusta’s commercial three-wheeler — the 175 Motocarro — was presented in 1954. There were several advancements compared to the 98. The steering wheel was replaced by a handlebar. The engine was a 172.3 cc four-stroke derived from the 175 CST with a single overhead cam. The load bay was at the rear and was made of metal. The wheels were much larger in diameter and the load capacity was of 350 kg.
In 1958, the company unveiled the 150 Centauro RF model. It was the third ‘transport’ vehicle from MV Agusta, and the first with a cab. The 150 cc four-stroke engine was based on the 125 cc unit found in the Turismo Rapido, though this also got a cooling fan. All that yielded 7 hp through a four-speed gearbox, good for a top speed of about 60 km/h. In 1961, the 150 Centauro RF was replaced by the modernized 150 Centauro RBF with an engine that was derived from the 150 Centomila.
There was the “big brother” of the Centauro which was called the Trasporto Tevere with the load capacity increased from 350 to 520 kg. The engine was a 235 cc four-stroke with 10 hp and a forced cooling. Further versions were the “MV TTB” and the “MV TTC”.
However, the real car appeared in the MV Agusta’s range in 1956. The 1100 / D2 model was powered by a 1,079 cc twin-cylinder diesel with a four-speed gearbox. Producing 27 hp, it was able to carry a ton. It was offered as a pick-up truck, a delivery van and a pure chassis. The latest modification was the 1101 / D2L with a load capacity of 1200 kg.
MV Agusta also created a single-passenger hovercraft with a 300 cc two-stroke twin, a compact tractor 185 Trattore and a tracked articulated, all-terrain carrier created by request of  the Italian Ministry of Defense.

1971—1980: Loss of the guiding force

With the death of Count Domenico Agusta in 1971, the company lost its guiding force. The company won their last Grand Prix in 1976 and by the end of the season they were out of racing.
The company's precarious economic position forced MV Agusta to seek out a new financial partner. A solution was found in the form of public financing giant EFIM, which demanded that MV Agusta exit the motorcycle industry if were to have any chance of straightening its finances. However, they continued to sell bikes until 1980, when the last machine in the Cascina Costa warehouses was bought up.

1991—2004: The revival. Age of Cagiva

The MV Agusta brand survived thanks to Castiglioni family. In 1960 Italian industrial entrepreneur Giovanni Castiglioni founded a metal fittings plant to produce buttons and rivets for jeans, locks and loops for suitcases etc. This business was pretty successful and soon two sons of Giovanni — Gianfranco and Claudio — started to work for their father's company. Both gentlemen had a real passion to motorcycles probably caused by the proximity of Aermacchi factory in Varese. At the end of 1976, when MV announced its withdrawal from motorcycle racing, Castiglioni brothers tried to buy the MV racing team, but Corrado Agusta did not approve the deal. Then Castiglioni bought a Suzuki RG500, painted it in traditional MV Agusta colours — red and silver — and provided it to the racers Gianfranco Bonera and Marco Lucchinelli in the 1978 racing season. In the same year, they bought the Aermacchi factory in Varese and renaming it Cagiva. Brothers were focused on more on racing rather than on serial production and they launched the new project Cagiva GP500 lead by Ezio Mascheroni, former head of the AMF-Harley-Davidson racing division.
Soon Cagiva became the largest Italian motorcycle manufacturer with annual production of 40,000 units. Things move slowly in Italy and, in the spring of 1992, the Castiglioni family finally managed to acquire MV Agusta. At the time, the Castiglionis owned Cagiva, Ducati, Moto Morini and Husqvarna, and operated out of the old Harley-Davidson Aermacchi premises at Schrianna on the shores of Lake Varese.
Massimo Tamburini ran Cagiva’s design department, CRC, in San Marino. Tamburini came to Cagiva from Bimota, and by late 1992 was in the final stages of finishing the Ducati 916. But after the 916 was finished, Tamburini was ill with a stomach tumour and it wasn’t until 1995 that he could embark on the next production bike project: the four-cylinder F4.
The first prototype was completed on the eve of the 1997 Trade Fair in Milan and exhibited to the press for the first time on September 16 of that year. But this presentation became a big surprise because this bike bore the MV Agusta logo.
The genesis for a new four-cylinder motorcycle went back to September, 1989 when Claudio Castiglioni and Tamburini discussed creating a high-performance 750cc four-cylinder all-Italian motorcycle.
As CRC was heavily involved in Cagiva’s 500cc Grand Prix racing program, resources to develop the F4 were limited so Ferrari Engineering in Modena was engaged to develop the prototype. The four-cylinder engine was initially similar to half a Ferrari V8. The choice of radial valves was also Ferrari Formula 1-inspired.
Engine development was problematic and in 1991 the F4 project was moved to the Ducati factory at Borgo Panigale in Bologna. Here two of Ducati’s most eminent engineers, Massimo Bordi and Fabio Taglioni were engaged to help facilitate development.
By 1994 the Cagiva Group was under considerable financial pressure and, at the end of the year, the Cagiva Racing Department closed. Department head Riccardo Rosa then assumed control of the F4 project, which moved back to Schrianna. Andrea Goggi, an engineer with Cagiva since 1988, was entrusted with redesigning the engine.
Massimo Tamburini was given the task of finalising the chassis and styling. By now it was decided the F4 would be an MV Agusta and Tamburini was given a blank sheet of paper with the freedom to design what he wanted. When Cagiva sold Ducati to the Texas Pacific Group in 1996, Tamburini elected to stay with Cagiva, citing as his reason, “Cagiva is my family”.
The F4 was equipped with an inline four cylinder 749.5 cc engine with radial valves. It produced 126 hp at 12,500 rpm and 72 Nm at 10,500 rpm. The maximum speed was 275 km/h. But probably the most unique feature was the design: the F4 was even exhibited in the Guggenheim Museum in New York during the Art of the Motorcycle exhibition from June 26 to September 20, 1998. The exhibit list included 95 of the most outstanding motorcycles of all ages. And four of them are MV Agusta brands. The fifties and sixties of the 20th century were represented by two grand prix 500 cc prototypes of the MV Agusta, the first half of the seventies — by the MV Agusta 750 S, and the late nineties — the MV Agusta F4 750. The success of the exhibition was so significant that the museum repeated it twice more: in its branches in Bilbao and Las Vegas.
The subsequent process of industrialisation was divided into two distinct stages: the first with production of a limited run of 300 F4 Serie Oro bikes, with carbon fibre bodywork, magnesium parts and an engine with sand cast crankcases anticipating the construction of the S model, destined for a broader range of users thanks to its price, cut by half over that of the previous version.
With just minor improvements the F4 750 was in production until 2004, when it was replaced by the F4 1000. At the same time, in addition to the regular versions of the 750 cc sports bike, number of special editions were also produced: 140 hp Senna in 2002 and 146 hp SPR / SR in 2003. Each special edition was limited by 300 units.

2004—2016: Time of changes

In December 2004, in spite of the fact that MV Agusta became the main brand of Cagiva group, due to cashflow problems Claudio Castiglioni was forced to sell a bigger part of his stake in MV Agusta to a Malaysian car maker Proton for 70 million euros. One year later Proton sold its shares to the Italian financial holding GEVI S.p.A. for 1 euro only.
In the meantime, Castiglioni obtained from the North American financier Oliver Curme, a general partner with Battery Ventures, who owned the Norton brand, license for production of a new generation of Norton motorcycles in Italy. However the deal wasn't approved by GEVI S.p.A. which proceed with another deal and sold Husqvarna to BMW in July 2007. Being disappointed by these decisions Claudio found a new opportunity for MV Agusta: on July 11, 2008, Harley-Davidson announced they had signed a definitive agreement to acquire the MV Agusta Group for 109 million US dollars, completing the acquisition on August 8, 2008. Claudio Castiglioni remained its president. Harley-Davidson invested 40 million euros into debts pay-off, production upgrade and the new model launches — a completely new three-cylinder F3 designed by the Ezio Mascheroni. However due to its own problems Harley-Davidson decided to sell MV Agusta in October 2009.And here Claudio was lucky again. On August 6, 2010 the new MV Agusta company, financially healthy and seriously refreshed, was bought by Castiglioni family for just 1 euro. Financial input of Proton and Harley-Davidson was enough to present the next generation of the extreme F4 sports bike with the new Corsa Corta engine with a capacity of 998 cc and 201 hp at EICMA 2010. It was the first new four-cylinder engine MV Agusta since 2005. At the same time, the Brutale naked line was updated, getting new model names 990 R and 1090 R. As a result, sales were increased for 50% in Q1 2010 and by the end of the year they achieved 3650 units.
However, on August 17, 2011, after a long illness at the age of 64, :it:Claudio Castiglioni|Claudio Castiglioni died. Giovanni Castiglioni, the son of Claudio, became the head of the company, and Massimo Bordi, who returned to the motorcycle industry, became vice-president.
“F3 is our future,” — Claudio Castiglioni said at the presentation of the three-cylinder F3 model — in fact, he shared the company strategy for the coming years. Production of the “supersport” F3 675 and its naked version Brutale 675 began at the Varese factory in 2012. A year later they were supplemented by 798 cc F3 800 and also by Rivale 800 hypermotard. Then the range of three-cylinder models was expanded with Brutale 800 and the Brutale 800 Dragster, as well as the Turismo Veloce 800 and Stradale 800 sport tourers.
During the next years MV Agusta demonstrated significant sales growth:  3,687 units in 2011, 6557 in 2012, 7488 in 2013, 9200 in 2014. However the company was not able to manage such explosive growth situation from processes and financials side and finally MV Agusta increased its debt again. In addition to this MV experienced its traditional problems with dealer network and spare parts delivery. Therefore, the announced partnership with Mercedes-AMG looked like a good deal for MV Agusta.
The motivation of Mercedes-AMG acquisition of 25% of MV remains unclear. But this followed similar acquisition strategy by rival Ducati, now in partnership with Audi. Anyway this deal helped MV Agusta with getting back lenders' confidence and in February 2015, Banca Popolare di Milano with the guarantees of the Italian export credit agency SACE loaned to MV Agusta 15 million euros to implement a new business plan. In addition, suppliers opened a new €25 million credit line for MV.
According to the press Giovani Castiglioni expected more investments from Mercedes-AMG which didn't hurry with it. To the beginning of 2016, Mercedes-AMG became ready to sell non-core asset with debts of over 40 million euros. However, taking into account the clause in the loan agreement with BPM that allows the bank to demand early repayment of debt, if Mercedes-AMG participation in the authorized capital of MV Agusta falls below 20%, the situation became difficult. Due to debts grow, suppliers began to refuse massively shipments of the components. Finally MV Agusta was forced to call for a judge protection to avoid bankruptcy.
In March 2016, municipal court of Varese approved the protective act "Concordato di continuità", putting a moratorium on creditors' requirements for the period of a new investor search. MV Agusta from its side was obliged to reduce production from 9,000 motorcycles per year to 6,000-7,000, to reduce R&D costs from 15 million euros to 7 million, to reduce expenses for the racing division Reparto Corse from 4 million euros to 600 thousand. In addition MV had to fire at least 200 employees. This was followed in early April by reports that MV was negotiating the repurchase of AMG's 25% stake in the company and looking for a new major investor, whilst retaining the majority shareholding of the Castiglioni family. Even of greater concern, were reports that MV were not delivering any spare parts and that the factory might have ceased production. However, the final debt restructuring plan was approved by the court only in December 2017 when a new investor came.

Since 2017

In November 2016, Giovanni Castiglioni and the UK-Russian fund COMSAR Invest agreed to conclude an investment agreement. The new debt restructuring plan for MV Agusta Motor S.p.A. was approved by the court in March 2017. At the same time the protective act "Concordato di continuità" was extended. To the mid of 2017 Black Ocean Group aquised 49% of the shares of MV Agusta Holding and Giovanni Castiglioni kept 51%.
Mercedes-AMG received payment from the parties for its 25%  in November 2017.
In March 2018, Giovanni Castiglioni, the CEO of MV Agusta, announced that the company was working on three new motorcycles based on a new 1,000 cc engine. The bikes would consist of a naked roadster, a café style roadster, and a replacement of the F4 superbike that will cease production in December 2018. The F4 replacement could be electric/gas hybrid, reportedly making more than 300 horsepower, and potentially would not be ready for production until 2021.
At the EICMA 2018 MV Agusta announced the a new family of 1,000 cc in-line “fours” created by MV technical director Brian Gillen and chief designer Adrian Morton. Brutale 1000 Serie Oro with 208 hp and 115 Nm allowed to achieve a maximum of 312 km/h, was introduced as the world's most powerful and fastest naked bike. It was also won a title of  the most beautiful bike of EICMA 2018.
At EICMA 2018 MV Agusta also introduced two new models.The first was the world's first neo-classic racer Superveloce 800 Serie Oro, built on the platform of the F3 800 with the design inspired by Italian sports cars of the 1960s and 1970s. The second one was the F4 Claudio — the last and the greatest model in the F4 history that paid tribute to Claudio Castiglioni. Superveloce 800 Serie Oro was limited by 300 units and F4 Claudio — by 100 units.
At the end of 2018 MV Agusta was recapitalized by extra 40 million euros. In the same year, Timur Sardarov was appointed the CEO of MV Agusta.
In October 2019, MV presented a new five-year business plan, promising annual production growth up to 25,000 units in 5 years. Massimo Bordi, was appointed deputy general director, and Paolo Bettin was appointed financial director. Former president of the company Giovanni Castiglioni kept the role of a consultant.
Timur Sardarov, MV Agusta Motor CEO, entered into an agreement with the Chinese Loncin Motor Company in July 2019, to jointly produce 350 and 500 cc motorcycle. Development work and production will be carried out by MV, using the existing 675/800 cc triple as a base for the engine. Machines will be marketed by both MV and Loncin's upmarket brand VOGE.

Racing history

Race wins (1948–1976)

The name of MV Agusta became popular in 1948 when Franco Bertoni won the 125 cc in the Italian Grand Prix. By that time MV Agusta adopted the commercial slogan: "Racing experience at the service of mass production".
The manufacturer won its first world championship in with Cecil Sandford in the 125 cc class. Starting a domination in all classes, MV Agusta won the 125 cc, 250 cc, 350 cc and 500 cc titles simultaneously in, and. The Italian manufacturer made an impressive streak conquering all 500 cc class riders' championships between 1958 and 1974.
MV Agusta retired from Grand Prix racing at the end of the season, having won 270 Grand Prix motorcycle races, 38 World Riders' Championships and 37 World Constructors' Championships with legendary riders such as Giacomo Agostini, Mike Hailwood, Phil Read, Carlo Ubbiali, Gary Hocking and John Surtees.

MotoGP World Championship

MV Agusta won the following world titles:
MV Agusta also won races in the famous Tourist Trophy. Giacomo Agostini made his Tourist Trophy debut in 1965 in the junior class on an MV 350 three-cylinder and finish third. He participated in 16 TT races, all on MV Agustas, he won the race 10 times, retired three times and was on the podium in the other races. He completed a senior-junior double in 1968, 1969, 1970 and 1972. Mike Hailwood won the Tourist Trophy on an MV Agusta four times, three in senior class and one in junior class. John Surtees turned to MV Agusta in 1956 and won the senior class. In 1958, he finished the junior and senior classes in first position, a feat he repeated in 1959. He also won the 1960 edition. MV Agusta won the Tourist Trophy 34 times.

Return to racing

Although there were no factory racing efforts, independent teams were racing the F4 750. In 2003 Big Show Racing of Chicago, Illinois, USA, fielded an F4 750 in the Formula USA, Daytona International Speedway 200 Mile Team Challenge. The team placed second overall with riders Larry Denning and Aaron Risinger piloting the bike.
In 2004 the company made a semi-official return to racing, backing the MV Agusta Deutschland team in the IDM German Superbike championship: Jörg Teuchert claimed two wins riding a F4 1000S, marking the company's return to a victory since Agostini's 1976 German Grand Prix win.
In 2005 the racing activities were expanded to the FIM Superstock 1000 Cup with Italian teams EVR Corse and Gimotorsports.
MV Agusta won the Italian Superstock Championship in 2006 with Luca Scassa, 30 years after its last title. In 2008 Scassa won the Italian Superbike Championship on a factory-backed machine from the racing department in Schiranna, Varese Italy.
Team Fast by Ferracci entered two F4s for Luca Scassa and Matt Lynn in the 2007 AMA Superbike Championship season.
The company planned its return to racing for the 2008 Superbike World Championship season: Carl Fogarty's English-based Team Foggy Racing was going to run the team; However the project was aborted due to a lack of sponsorship.
In 2013 two MV Agusta F4-RR were entered by Grant Racing in the British Superstock Championship.
The MV Agusta F3 675 competed in the 2013 Supersport World Championship season with two bikes managed by Team ParkinGO; Roberto Rolfo and Christian Iddon rode the bikes achieving three podiums.
In 2014 MV Agusta made the official return to racing establishing the MV Agusta Reparto Corse works team, managing both World Superbike and Supersport activities.
In 2018 it was announced that MV Agusta would return to Grand Prix racing as well with Forward Racing in Moto2. The new bike will begin testing in July for a return to racing in the 2019 season. It will be the first time since 1976 that MV Agusta will have an entry on the grand prix entry list when it dropped out due to financial difficulties.
In November 2018, Stefano Manzi and Dominique Aegerter were announced as the team's two riders in the manufacturer's return to Grand Prix racing.
The new bike also features a new engine package built for it. The aging Honda CBR600RR inline-4 engine—which had been used since the inaugural Moto2 season back in 2010—was replaced by a 765 cc triple cylinder engine developed by Triumph Motorcycles based on the Street Triple RS 765.

MV Agusta Reparto Corse

Classic product history

Classic street models (1946–1980)

MV Agusta F4

MV Agusta Brutale

MV Agusta F3

MV Agusta Rivale

Limited editions
Limited editions
Limited editions
Limited edition