Marble sculpture


Marble sculpture is the art of creating three-dimensional forms from marble. Sculpture is among the oldest of the arts. Even before painting cave walls, early humans fashioned shapes from stone. From these beginnings, artifacts have evolved to their current complexity.

Material origin and qualities

Marble is a metamorphic rock derived from limestone, composed mostly of calcite. The original source of the parent limestone is the seabed deposition of calcium carbonate in the form of microscopic animal skeletons or similar materials. Marble is formed when the limestone is transformed by heat and pressure after being overlain by other materials. The finest marbles for sculpture have no or few stains, though natural stains can be incorporated into the work itself.

Advantages

Among the commonly available stones, only marble has a slight translucency i.e. subsurface scattering that is comparable to that of human skin. It is this translucency that gives a marble sculpture a visual depth beyond its surface and this evokes a certain realism when used for figurative works. Marble also has the advantage that, when first quarried, it is relatively soft and easy to work, refine, and polish. As the finished marble ages, it becomes harder and more durable. Preference to the cheaper and less translucent limestone is based largely on the fineness of marble's grain, which enables the sculptor to render minute detail in a manner not always possible with limestone. In contrast to limestone, marble is also extremely weather-resistant. As a result, surface changes due to the immediate environment are not always visible to the naked eye. This feature can pose challenges when dating ancient works.

Disadvantages

Marble does not bear handling well as it will absorb skin oils when touched, which leads to yellow brownish staining. While more resistant than limestone it is subject to attack by weak acids, and so performs poorly in outdoor environments subject to acid rain. For severe environments, granite is a more lasting material but one which is far more difficult to work and much less suitable for refined works. Compared to metals such as bronze, furthermore, marble is inflexible and vulnerable to fracturing. This drawback means that sculptors must incorporate specific supporting features into the sculpture to prevent collapse. In Thomas Ridgeway Gould's The West Wind, for example, he poised the figure's short and slender ankles delicately upon the balls of her small feet. This would not be possible without the deliberate decision by Gould to distribute almost all of the marble's weight to her massive, flowing skirt. Unlike bronze sculpture, this statue is not hollow; her drapery is one solid block of marble.
statue in the Louvre: note use of skirt, tree stump, and stag for support of the body and lower arm and the "pinning" of the upper arm to the arrows in the quiver, forming several closed loops that are thus stronger

Developing a sculpture

Sculptors usually begin by knocking off, or "pitching," large portions of unwanted stone. A suitable tool for this task is a point chisel, which is a long, hefty piece of steel with a point at one end and a broad striking surface at the other. A pitching tool may also be used at this early stage, which is a wedge-shaped chisel with a broad, flat edge. The pitching tool is useful for splitting the stone and removing large, unwanted chunks.
The sculptor may also use a mallet, which is similar to a hammer with a broad, barrel-shaped head. When the mallet connects to the tool, energy is transferred through the tool, shattering the stone. Most sculptors work rhythmically, turning the tool with each blow so that the stone is removed quickly and evenly. This is the "roughing out" stage of the sculpting process. While a mallet provides the force needed to fracture the marble, it must be used accurately. The smallest miscalculation can ruin the intended sculpture and even injure the sculptor.
Some artists prefer to carve directly onto the stone, without a model; the Renaissance artist Michelangelo, for example, claimed that his job was to free the human form trapped inside the block. Other artists sculpt a preliminary model out of clay or wax and then translate its features to stone through the use of calipers or a pointing machine.
Once the general shape of the statue has been determined, the sculptor uses other tools to refine the figure. A toothed chisel or claw chisel has multiple gouging surfaces which create parallel lines in the stone. These tools are generally used to add texture to the figure. An artist might mark out specific lines by using calipers to measure an area of stone to be addressed and marking the removal area with pencil, charcoal or chalk. The stone carver generally uses a shallower stroke at this point in the process.
Eventually, the sculptor has changed the stone from a rough block into the general shape of the finished statue. Tools called rasps and rifflers are then used to enhance the shape into its final form. A rasp is a flat, steel tool with a coarse surface. The sculptor uses broad, sweeping strokes to remove excess stone as small chips or dust. A riffler is a smaller variation of the rasp, which can be used to create details such as folds of clothing or locks of hair.
Polishing is the last step of the carving process. Sculptors use a variety of fine, abrasive materials such as sandpaper or emery paper to highlight patterns in the stone and to accentuate its natural sheen. Some sculptors may also use tin oxide to achieve a high-lustre polish. Regardless of the method, however, a glossy marble sculpture will appear more translucent than one that has not been polished.

Tools

The Italian terms for the basic carving tools of stone sculpture are given here, and where possible the English terms have been included.
In addition to those hand tools listed above, the marble sculptor uses a variety of hammers – both for the striking of edge tools and for striking the stone directly. Following the work of the hammer and chisel, the sculptor will sometimes refine the form further through the use of rasps, files and abrasive rubbing stones and/or sandpaper to smooth the surface contours of the form.

Tool technique

Hammer and point work is the technique used in working stone, in use at least since Roman times, as it is described in the legend of Pygmalion, and even earlier, the ancient Greek sculptors used it from c. 650 BC. It consists of holding the pointed chisel against the stone and swinging the hammer at it as hard as possible. When the hammer connects with the striking end of the chisel, its energy is transferred down the length and concentrates on a single point on the surface of the block, breaking the stone. This is continued in a line following the desired contour. It may sound simple but many months are required to attain competency. A good stone worker can maintain a rhythm of relatively longer blows, swinging the hammer in a wider arc, lifting the chisel between blows to flick out any chips that remain in the way, and repositioning it for the next blow. This way, one can drive the point deeper into the stone and remove more material at a time. Some stoneworkers also spin the subbia in their fingers between hammer blows, thus applying with each blow a different part of the point to the stone. This helps prevent the point from breaking.
, Palazzo Massimo Alle Terme in Rome

A few well-known marble sculptures