Mazda G engine


The G family of Mazda engines is a family of large inline-four piston engines that was commercialized from 1989 to 2001. The series started at 2.6 L for the Mazda B-Series truck from 1988. Prior to that, a 2.6 L Mitsubishi engine had been used.

G54B

The 2.6 L Mazda G54B was actually a Mitsubishi engine. It displaces and was used in the B2600 pickup from 1986-1988, until Mazda developed their own suitable engine.

G6

Mazda replaced the G54B with its own 2.6 L G6 engine which displaces. Bore and stroke are. The G6 was produced until 2006.
Compression Ratio: 8.4
Valve train: 12V SOHC
Applications:
The 2.5 L G5 was an evolution of the G6. It produces at 4000 rpm.
Applications:
The GY is not at all related to the Mazda G-series four-cylinder engines and is listed in this article strictly by engine code association. GY is the Mazda engine code for a Ford Duratec V6 engine which, due to an OEM deal with Ford, was built by Mazda in Japan for limited use in the 1999-2001 Mazda MPV. This Duratec V6 engine was in turn based on the original Mazda KL from 1991. By the late 1990s Ford executives had ordered Mazda to cease development of V6 engines and instead focus on a new range of four-cylinder engines for both companies' benefit, which would become the MZR/Duratec lineup of inline-four engines. The order to discontinue their own V6 development included the Mazda K engine, leaving Mazda the only option of employing later Ford V6s, which were considerably cheaper to manufacture.
Applications: