Michelson–Morley experiment
The Michelson–Morley experiment was an attempt to detect the existence of the luminiferous aether, a supposed medium permeating space that was thought to be the carrier of light waves. The experiment was performed between April and July 1887 by Albert A. Michelson and Edward W. Morley at what is now Case Western Reserve University in Cleveland, Ohio, and published in November of the same year. It compared the speed of light in perpendicular directions in an attempt to detect the relative motion of matter through the stationary luminiferous aether. The result was negative, in that Michelson and Morley found no significant difference between the speed of light in the direction of movement through the presumed aether, and the speed at right angles. This result is generally considered to be the first strong evidence against the then-prevalent aether theory, and initiated a line of research that eventually led to special relativity, which rules out a stationary aether. Of this experiment, Einstein wrote, "If the Michelson–Morley experiment had not brought us into serious embarrassment, no one would have regarded the relativity theory as a redemption."
Michelson–Morley type experiments have been repeated many times with steadily increasing sensitivity. These include experiments from 1902 to 1905, and a series of experiments in the 1920s. More recent optical resonator experiments confirmed the absence of any aether wind at the 10−17 level. Together with the Ives–Stilwell and Kennedy–Thorndike experiments, Michelson–Morley type experiments form one of the fundamental tests of special relativity theory.
Detecting the aether
theories of the late 19th century assumed that just as surface water waves must have a supporting substance, i.e., a "medium", to move across, and audible sound requires a medium to transmit its wave motions, so light must also require a medium, the "luminiferous aether", to transmit its wave motions. Because light can travel through a vacuum, it was assumed that even a vacuum must be filled with aether. Because the speed of light is so great, and because material bodies pass through the aether without obvious friction or drag, it was assumed to have a highly unusual combination of properties. Designing experiments to investigate these properties was a high priority of 19th century physics.Earth orbits around the Sun at a speed of around, or. The Earth is in motion, so two main possibilities were considered: The aether is stationary and only partially dragged by Earth, or the aether is completely dragged by Earth and thus shares its motion at Earth's surface. In addition, James Clerk Maxwell recognized the electromagnetic nature of light and developed what are now called Maxwell's equations, but these equations were still interpreted as describing the motion of waves through an aether, whose state of motion was unknown. Eventually, Fresnel's idea of an stationary aether was preferred because it appeared to be confirmed by the Fizeau experiment and the aberration of star light.
According to the stationary and the partially-dragged aether hypotheses, Earth and the aether are in relative motion, implying that a so-called "aether wind" should exist. Although it would be possible, in theory, for the Earth's motion to match that of the aether at one moment in time, it was not possible for the Earth to remain at rest with respect to the aether at all times, because of the variation in both the direction and the speed of the motion. At any given point on the Earth's surface, the magnitude and direction of the wind would vary with time of day and season. By analyzing the return speed of light in different directions at various different times, it was thought to be possible to measure the motion of the Earth relative to the aether. The expected relative difference in the measured speed of light was quite small, given that the velocity of the Earth in its orbit around the Sun has a magnitude of about one hundredth of one percent of the speed of light.
During the mid-19th century, measurements of aether wind effects of first order, i.e., effects proportional to v/c were thought to be possible, but no direct measurement of the speed of light was possible with the accuracy required. For instance, the Fizeau–Foucault apparatus could measure the speed of light to perhaps 5% accuracy, which was quite inadequate for measuring directly a first-order 0.01% change in the speed of light. A number of physicists therefore attempted to make measurements of indirect first-order effects not of the speed of light itself, but of variations in the speed of light. The Hoek experiment, for example, was intended to detect interferometric fringe shifts due to speed differences of oppositely propagating light waves through water at rest. The results of such experiments were all negative. This could be explained by using Fresnel's dragging coefficient, according to which the aether and thus light are partially dragged by moving matter. Partial aether-dragging would thwart attempts to measure any first order change in the speed of light. As pointed out by Maxwell, only experimental arrangements capable of measuring second order effects would have any hope of detecting aether drift, i.e., effects proportional to v2/c2. Existing experimental setups, however, were not sensitive enough to measure effects of that size.
1881 and 1887 experiments
Michelson experiment (1881)
Michelson had a solution to the problem of how to construct a device sufficiently accurate to detect aether flow. In 1877, while teaching at his alma mater, the United States Naval Academy in Annapolis, Michelson conducted his first known light speed experiments as a part of a classroom demonstration. In 1881, he left active U.S. Naval service while in Germany concluding his studies. In that year, Michelson used a prototype experimental device to make several more measurements.The device he designed, later known as a Michelson interferometer, sent yellow light from a sodium flame, or white light, through a half-silvered mirror that was used to split it into two beams traveling at right angles to one another. After leaving the splitter, the beams traveled out to the ends of long arms where they were reflected back into the middle by small mirrors. They then recombined on the far side of the splitter in an eyepiece, producing a pattern of constructive and destructive interference whose transverse displacement would depend on the relative time it takes light to transit the longitudinal vs. the transverse arms. If the Earth is traveling through an aether medium, a light beam traveling parallel to the flow of that aether will take longer to reflect back and forth than would a beam traveling perpendicular to the aether, because the increase in elapsed time from traveling against the aether wind is more than the time saved by traveling with the aether wind. Michelson expected that the Earth's motion would produce a fringe shift equal to 0.04 fringes—that is, of the separation between areas of the same intensity. He did not observe the expected shift; the greatest average deviation that he measured was only 0.018 fringes; most of his measurements were much less. His conclusion was that Fresnel's hypothesis of a stationary aether with partial aether dragging would have to be rejected, and thus he confirmed Stokes' hypothesis of complete aether dragging.
However, Alfred Potier pointed out to Michelson that he had made an error of calculation, and that the expected fringe shift should have been only 0.02 fringes. Michelson's apparatus was subject to experimental errors far too large to say anything conclusive about the aether wind. Definitive measurement of the aether wind would require an experiment with greater accuracy and better controls than the original. Nevertheless, the prototype was successful in demonstrating that the basic method was feasible.
Michelson–Morley experiment (1887)
In 1885, Michelson began a collaboration with Edward Morley, spending considerable time and money to confirm with higher accuracy Fizeau's 1851 experiment on Fresnel's drag coefficient, to improve on Michelson's 1881 experiment, and to establish the wavelength of light as a standard of length. At this time Michelson was professor of physics at the Case School of Applied Science, and Morley was professor of chemistry at Western Reserve University, which shared a campus with the Case School on the eastern edge of Cleveland. Michelson suffered a nervous breakdown in September 1885, from which he recovered by October 1885. Morley ascribed this breakdown to the intense work of Michelson during the preparation of the experiments. In 1886, Michelson and Morley successfully confirmed Fresnel's drag coefficient – this result was also considered as a confirmation of the stationary aether concept.This result strengthened their hope of finding the aether wind. Michelson and Morley created an improved version of the Michelson experiment with more than enough accuracy to detect this hypothetical effect. The experiment was performed in several periods of concentrated observations between April and July 1887, in the basement of Adelbert Dormitory of WRU.
As shown in Fig. 5, the light was repeatedly reflected back and forth along the arms of the interferometer, increasing the path length to. At this length, the drift would be about 0.4 fringes. To make that easily detectable, the apparatus was assembled in a closed room in the basement of the heavy stone dormitory, eliminating most thermal and vibrational effects. Vibrations were further reduced by building the apparatus on top of a large block of sandstone, about a foot thick and square, which was then floated in a circular trough of mercury. They estimated that effects of about 0.01 fringe would be detectable.
Michelson and Morley and other early experimentalists using interferometric techniques in an attempt to measure the properties of the luminiferous aether, used monochromatic light only for initially setting up their equipment, always switching to white light for the actual measurements. The reason is that measurements were recorded visually. Purely monochromatic light would result in a uniform fringe pattern. Lacking modern means of environmental temperature control, experimentalists struggled with continual fringe drift even when the interferometer was set up in a basement. Because the fringes would occasionally disappear due to vibrations caused by passing horse traffic, distant thunderstorms and the like, an observer could easily "get lost" when the fringes returned to visibility. The advantages of white light, which produced a distinctive colored fringe pattern, far outweighed the difficulties of aligning the apparatus due to its low coherence length. As Dayton Miller wrote, "White light fringes were chosen for the observations because they consist of a small group of fringes having a central, sharply defined black fringe which forms a permanent zero reference mark for all readings." Use of partially monochromatic light during initial alignment enabled the researchers to locate the position of equal path length, more or less easily, before switching to white light.
The mercury trough allowed the device to turn with close to zero friction, so that once having given the sandstone block a single push it would slowly rotate through the entire range of possible angles to the "aether wind," while measurements were continuously observed by looking through the eyepiece. The hypothesis of aether drift implies that because one of the arms would inevitably turn into the direction of the wind at the same time that another arm was turning perpendicularly to the wind, an effect should be noticeable even over a period of minutes.
The expectation was that the effect would be graphable as a sine wave with two peaks and two troughs per rotation of the device. This result could have been expected because during each full rotation, each arm would be parallel to the wind twice and perpendicular to the wind twice. Additionally, due to the Earth's rotation, the wind would be expected to show periodic changes in direction and magnitude during the course of a sidereal day.
Because of the motion of the Earth around the Sun, the measured data were also expected to show annual variations.
Most famous "failed" experiment
After all this thought and preparation, the experiment became what has been called the most famous failed experiment in history. Instead of providing insight into the properties of the aether, Michelson and Morley's article in the American Journal of Science reported the measurement to be as small as one-fortieth of the expected displacement, but "since the displacement is proportional to the square of the velocity" they concluded that the measured velocity was "probably less than one-sixth" of the expected velocity of the Earth's motion in orbit and "certainly less than one-fourth." Although this small "velocity" was measured, it was considered far too small to be used as evidence of speed relative to the aether, and it was understood to be within the range of an experimental error that would allow the speed to actually be zero. For instance, Michelson wrote about the "decidedly negative result" in a letter to Lord Rayleigh in August 1887:From the standpoint of the then current aether models, the experimental results were conflicting. The Fizeau experiment and its 1886 repetition by Michelson and Morley apparently confirmed the stationary aether with partial aether dragging, and refuted complete aether dragging. On the other hand, the much more precise Michelson–Morley experiment apparently confirmed complete aether dragging and refuted the stationary aether. In addition, the Michelson–Morley null result was further substantiated by the null results of other second-order experiments of different kind, namely the Trouton–Noble experiment and the experiments of Rayleigh and Brace. These problems and their solution led to the development of the Lorentz transformation and special relativity.
After the "failed" experiment Michelson and Morley ceased their aether drift measurements and started to use their newly developed technique to establish the wavelength of light as a standard of length.
Light path analysis and consequences
Observer resting in the aether
The beam travel time in the longitudinal direction can be derived as follows: Light is sent from the source and propagates with the speed of light in the aether. It passes through the half-silvered mirror at the origin at. The reflecting mirror is at that moment at distance and is moving with velocity. The beam hits the mirror at time and thus travels the distance. At this time, the mirror has traveled the distance. Thus and consequently the travel time. The same consideration applies to the backward journey, with the sign of reversed, resulting in and. The total travel time is:Michelson obtained this expression correctly in 1881, however, in transverse direction he obtained the incorrect expression
because he overlooked the increased path length in the rest frame of the aether. This was corrected by Alfred Potier and Hendrik Lorentz. The derivation in the transverse direction can be given as follows : The beam is propagating at the speed of light and hits the mirror at time, traveling the distance. At the same time, the mirror has traveled the distance in the x direction. So in order to hit the mirror, the travel path of the beam is in the y direction and in the x direction. This inclined travel path follows from the transformation from the interferometer rest frame to the aether rest frame. Therefore, the Pythagorean theorem gives the actual beam travel distance of. Thus and consequently the travel time, which is the same for the backward journey. The total travel time is:
The time difference between Tℓ and Tt before rotation is given by
By multiplying with c, the corresponding length difference before rotation is
and after rotation
Dividing by the wavelength λ, the fringe shift n is found:
Since L ≈ 11 meters and λ≈500 nanometers, the expected fringe shift was n ≈ 0.44. So the result would be a delay in one of the light beams that could be detected when the beams were recombined through interference. Any slight change in the spent time would then be observed as a shift in the positions of the interference fringes. The negative result led Michelson to the conclusion that there is no measurable aether drift.
Observer comoving with the interferometer
If the same situation is described from the view of an observer co-moving with the interferometer, then the effect of aether wind is similar to the effect experienced by a swimmer, who tries to move with velocity against a river flowing with velocity.In the longitudinal direction the swimmer first moves upstream, so his velocity is diminished due to the river flow to. On his way back moving downstream, his velocity is increased to. This gives the beam travel times and as mentioned above.
In the transverse direction, the swimmer has to compensate for the river flow by moving at a certain angle against the flow direction, in order to sustain his exact transverse direction of motion and to reach the other side of the river at the correct location. This diminishes his speed to, and gives the beam travel time as mentioned above.
Mirror reflection
The classical analysis predicted a relative phase shift between the longitudinal and transverse beams which in Michelson and Morley's apparatus should have been readily measurable. What is not often appreciated, is that motion through the hypothetical aether should also have caused the two beams to diverge as they emerged from the interferometer by about 10−8 radians.For an apparatus in motion, the classical analysis requires that the beam-splitting mirror be slightly offset from an exact 45° if the longitudinal and transverse beams are to emerge from the apparatus exactly superimposed. In the relativistic analysis, Lorentz-contraction of the beam splitter in the direction of motion causes it to become more perpendicular by precisely the amount necessary to compensate for the angle discrepancy of the two beams.
Length contraction and Lorentz transformation
A first step to explaining the Michelson and Morley experiment's null result was found in the FitzGerald–Lorentz contraction hypothesis, now simply called length contraction or Lorentz contraction, first proposed by George FitzGerald and Hendrik Lorentz. According to this law all objects physically contract by along the line of motion, being the Lorentz factor. This hypothesis was partly motivated by Oliver Heaviside's discovery in 1888 that electrostatic fields are contracting in the line of motion. But since there was no reason at that time to assume that binding forces in matter are of electric origin, length contraction of matter in motion with respect to the aether was considered an Ad hoc hypothesis.If length contraction of is inserted into the above formula for, then the light propagation time in the longitudinal direction becomes equal to that in the transverse direction:
However, length contraction is only a special case of the more general relation, according to which the transverse length is larger than the longitudinal length by the ratio. This can be achieved in many ways. If is the moving longitudinal length and the moving transverse length, being the rest lengths, then it is given:
can be arbitrarily chosen, so there are infinitely many combinations to explain the Michelson–Morley null result. For instance, if the relativistic value of length contraction of occurs, but if then no length contraction but an elongation of occurs. This hypothesis was later extended by Joseph Larmor, Lorentz and Henri Poincaré, who developed the complete Lorentz transformation including time dilation in order to explain the Trouton–Noble experiment, the Experiments of Rayleigh and Brace, and Kaufmann's experiments. It has the form
It remained to define the value of, which was shown by Lorentz to be unity. In general, Poincaré demonstrated that only allows this transformation to form a group, so it is the only choice compatible with the principle of relativity, i.e., making the stationary aether undetectable. Given this, length contraction and time dilation obtain their exact relativistic values.
Special relativity
formulated the theory of special relativity by 1905, deriving the Lorentz transformation and thus length contraction and time dilation from the relativity postulate and the constancy of the speed of light, thus removing the ad hoc character from the contraction hypothesis. Einstein emphasized the kinematic foundation of the theory and the modification of the notion of space and time, with the stationary aether no longer playing any role in his theory. He also pointed out the group character of the transformation. Einstein was motivated by Maxwell's theory of electromagnetism and the lack of evidence for the luminiferous aether.This allows a more elegant and intuitive explanation of the Michelson–Morley null result. In a comoving frame the null result is self-evident, since the apparatus can be considered as at rest in accordance with the relativity principle, thus the beam travel times are the same. In a frame relative to which the apparatus is moving, the same reasoning applies as described above in "Length contraction and Lorentz transformation", except the word "aether" has to be replaced by "non-comoving inertial frame". Einstein wrote in 1916:
The extent to which the null result of the Michelson–Morley experiment influenced Einstein is disputed. Alluding to some statements of Einstein, many historians argue that it played no significant role in his path to special relativity, while other statements of Einstein probably suggest that he was influenced by it. In any case, the null result of the Michelson–Morley experiment helped the notion of the constancy of the speed of light gain widespread and rapid acceptance.
It was later shown by Howard Percy Robertson and others, that it is possible to derive the Lorentz transformation entirely from the combination of three experiments. First, the Michelson–Morley experiment showed that the speed of light is independent of the orientation of the apparatus, establishing the relationship between longitudinal and transverse lengths. Then in 1932, Roy Kennedy and Edward Thorndike modified the Michelson–Morley experiment by making the path lengths of the split beam unequal, with one arm being very short. The Kennedy–Thorndike experiment took place for many months as the Earth moved around the sun. Their negative result showed that the speed of light is independent of the velocity of the apparatus in different inertial frames. In addition it established that besides length changes, corresponding time changes must also occur, i.e., it established the relationship between longitudinal lengths and time changes. So both experiments do not provide the individual values of these quantities. This uncertainty corresponds to the undefined factor as described above. It was clear due to theoretical reasons that the individual values of length contraction and time dilation must assume their exact relativistic form. But a direct measurement of one of these quantities was still desirable to confirm the theoretical results. This was achieved by the Ives–Stilwell experiment, measuring α in accordance with time dilation. Combining this value for α with the Kennedy–Thorndike null result shows that β must assume the value of relativistic length contraction. Combining β with the Michelson–Morley null result shows that δ must be zero. Therefore, the Lorentz transformation with is an unavoidable consequence of the combination of these three experiments.
Special relativity is generally considered the solution to all negative aether drift measurements, including the Michelson–Morley null result. Many high precision measurements have been conducted as tests of special relativity and modern searches for Lorentz violation in the photon, electron, nucleon, or neutrino sector, all of them confirming relativity.
Incorrect alternatives
As mentioned above, Michelson initially believed that his experiment would confirm Stokes' theory, according to which the aether was fully dragged in the vicinity of the earth. However, complete aether drag contradicts the observed aberration of light and was contradicted by other experiments as well. In addition, Lorentz showed in 1886 that Stokes's attempt to explain aberration is contradictory.Furthermore, the assumption that the aether is not carried in the vicinity, but only within matter, was very problematic as shown by the Hammar experiment. Hammar directed one leg of his interferometer through a heavy metal pipe plugged with lead. If aether were dragged by mass, it was theorized that the mass of the sealed metal pipe would have been enough to cause a visible effect. Once again, no effect was seen, so aether-drag theories are considered to be disproven.
Walther Ritz's emission theory was also consistent with the results of the experiment, not requiring aether. The theory postulates that light has always the same velocity in respect to the source. However de Sitter noted that emitter theory predicted several optical effects that were not seen in observations of binary stars in which the light from the two stars could be measured in a spectrometer. If emission theory were correct, the light from the stars should experience unusual fringe shifting due to the velocity of the stars being added to the speed of the light, but no such effect could be seen. It was later shown by J. G. Fox that the original de Sitter experiments were flawed due to extinction, but in 1977 Brecher observed X-rays from binary star systems with similar null results. Furthermore, Filippas and Fox conducted terrestrial particle accelerator tests specifically designed to address Fox's earlier "extinction" objection, the results being inconsistent with source dependence of the speed of light.
Subsequent experiments
Although Michelson and Morley went on to different experiments after their first publication in 1887, both remained active in the field. Other versions of the experiment were carried out with increasing sophistication. Morley was not convinced of his own results, and went on to conduct additional experiments with Dayton Miller from 1902 to 1904. Again, the result was negative within the margins of error.Miller worked on increasingly larger interferometers, culminating in one with a arm length that he tried at various sites, including on top of a mountain at the Mount Wilson Observatory. To avoid the possibility of the aether wind being blocked by solid walls, his mountaintop observations used a special shed with thin walls, mainly of canvas. From noisy, irregular data, he consistently extracted a small positive signal that varied with each rotation of the device, with the sidereal day, and on a yearly basis. His measurements in the 1920s amounted to approximately instead of the nearly expected from the Earth's orbital motion alone. He remained convinced this was due to partial entrainment or aether dragging, though he did not attempt a detailed explanation. He ignored critiques demonstrating the inconsistency of his results and the refutation by the Hammar experiment. Miller's findings were considered important at the time, and were discussed by Michelson, Lorentz and others at a meeting reported in 1928. There was general agreement that more experimentation was needed to check Miller's results. Miller later built a non-magnetic device to eliminate magnetostriction, while Michelson built one of non-expanding Invar to eliminate any remaining thermal effects. Other experimenters from around the world increased accuracy, eliminated possible side effects, or both. So far, no one has been able to replicate Miller's results, and modern experimental accuracies have ruled them out. Roberts has pointed out that the primitive data reduction techniques used by Miller and other early experimenters, including Michelson and Morley, were capable of creating apparent periodic signals even when none existed in the actual data. After reanalyzing Miller's original data using modern techniques of quantitative error analysis, Roberts found Miller's apparent signals to be statistically insignificant.
Using a special optical arrangement involving a 1/20 wave step in one mirror, Roy J. Kennedy and K.K. Illingworth converted the task of detecting fringe shifts from the relatively insensitive one of estimating their lateral displacements to the considerably more sensitive task of adjusting the light intensity on both sides of a sharp boundary for equal luminance. If they observed unequal illumination on either side of the step, such as in Fig. 8e, they would add or remove calibrated weights from the interferometer until both sides of the step were once again evenly illuminated, as in Fig. 8d. The number of weights added or removed provided a measure of the fringe shift. Different observers could detect changes as little as 1/300 to 1/1500 of a fringe. Kennedy also carried out an experiment at Mount Wilson, finding only about 1/10 the drift measured by Miller and no seasonal effects.
In 1930, Georg Joos conducted an experiment using an automated interferometer with arms forged from pressed quartz having a very low coefficient of thermal expansion, that took continuous photographic strip recordings of the fringes through dozens of revolutions of the apparatus. Displacements of 1/1000 of a fringe could be measured on the photographic plates. No periodic fringe displacements were found, placing an upper limit to the aether wind of.
In the table below, the expected values are related to the relative speed between Earth and Sun of. With respect to the speed of the solar system around the galactic center of about, or the speed of the solar system relative to the CMB rest frame of about, the null results of those experiments are even more obvious.
| Name | Location | Year | Arm length | Fringe shift expected | Fringe shift measured | Ratio | Upper Limit on Vaether | Experimental Resolution | Null result |
| Michelson | Potsdam | 1881 | 1.2 | 0.04 | ≤ 0.02 | 2 | ∼ 20 km/s | 0.02 | yes |
| Michelson and Morley | Cleveland | 1887 | 11.0 | 0.4 | < 0.02 or ≤ 0.01 | 40 | ∼ 4–8 km/s | 0.01 | yes |
| Morley and Miller | Cleveland | 1902–1904 | 32.2 | 1.13 | ≤ 0.015 | 80 | ∼ 3.5 km/s | 0.015 | yes |
| Miller | Mt. Wilson | 1921 | 32.0 | 1.12 | ≤ 0.08 | 15 | ∼ 8–10 km/s | unclear | unclear |
| Miller | Cleveland | 1923–1924 | 32.0 | 1.12 | ≤ 0.03 | 40 | ∼ 5 km/s | 0.03 | yes |
| Miller | Cleveland | 1924 | 32.0 | 1.12 | ≤ 0.014 | 80 | ∼ 3 km/s | 0.014 | yes |
| Tomaschek | Heidelberg | 1924 | 8.6 | 0.3 | ≤ 0.02 | 15 | ∼ 7 km/s | 0.02 | yes |
| Miller | Mt. Wilson | 1925–1926 | 32.0 | 1.12 | ≤ 0.088 | 13 | ∼ 8–10 km/s | unclear | unclear |
| Kennedy | Pasadena/Mt. Wilson | 1926 | 2.0 | 0.07 | ≤ 0.002 | 35 | ∼ 5 km/s | 0.002 | yes |
| Illingworth | Pasadena | 1927 | 2.0 | 0.07 | ≤ 0.0004 | 175 | ∼ 2 km/s | 0.0004 | yes |
| Piccard & Stahel | with a Balloon | 1926 | 2.8 | 0.13 | ≤ 0.006 | 20 | ∼ 7 km/s | 0.006 | yes |
| Piccard & Stahel | Brussels | 1927 | 2.8 | 0.13 | ≤ 0.0002 | 185 | ∼ 2.5 km/s | 0.0007 | yes |
| Piccard & Stahel | Rigi | 1927 | 2.8 | 0.13 | ≤ 0.0003 | 185 | ∼ 2.5 km/s | 0.0007 | yes |
| Michelson et al. | Mt. Wilson | 1929 | 25.9 | 0.9 | ≤ 0.01 | 90 | ∼ 3 km/s | 0.01 | yes |
| Joos | Jena | 1930 | 21.0 | 0.75 | ≤ 0.002 | 375 | ∼ 1.5 km/s | 0.002 | yes |
Recent experiments
Optical tests
Optical tests of the isotropy of the speed of light became commonplace. New technologies, including the use of lasers and masers, have significantly improved measurement precision., Jaseja, and Shamir/Fox| Author | Year | Description | Upper bounds |
| Louis Essen | 1955 | The frequency of a rotating microwave cavity resonator is compared with that of a quartz clock | ~3 km/s |
| Cedarholm et al. | 1958 | Two ammonia masers were mounted on a rotating table, and their beams were directed in opposite directions. | ~30 m/s |
| Mössbauer rotor experiments | 1960–68 | In a series of experiments by different researchers, the frequencies of gamma rays were observed using the Mössbauer effect. | ~2.0 cm/s |
| Jaseja et al. | 1964 | The frequencies of two He–Ne masers, mounted on a rotating table, were compared. Unlike Cedarholm et al., the masers were placed perpendicular to each other. | ~30 m/s |
| Shamir and Fox | 1969 | Both arms of the interferometer were contained in a transparent solid. The light source was a Helium–neon laser. | ~7 km/s |
| Trimmer et al. | 1973 | They searched for anisotropies of the speed of light behaving as the first and third of the Legendre polynomials. They used a triangle interferometer, with one portion of the path in glass. | ~2.5 cm/s |
Recent optical resonator experiments
During the early 21st century, there has been a resurgence in interest in performing precise Michelson–Morley type experiments using lasers, masers, cryogenic optical resonators, etc. This is in large part due to predictions of quantum gravity that suggest that special relativity may be violated at scales accessible to experimental study. The first of these highly accurate experiments was conducted by Brillet & Hall, in which they analyzed a laser frequency stabilized to a resonance of a rotating optical Fabry–Pérot cavity. They set a limit on the anisotropy of the speed of light resulting from the Earth's motions of Δc/c ≈ 10−15, where Δc is the difference between the speed of light in the x- and y-directions.As of 2015, optical and microwave resonator experiments have improved this limit to Δc/c ≈ 10−18. In some of them, the devices were rotated or remained stationary, and some were combined with the Kennedy–Thorndike experiment. In particular, Earth's direction and velocity relative to the CMB rest frame are ordinarily used as references in these searches for anisotropies.
| Author | Year | Description | Δc/c |
| Wolf et al. | 2003 | The frequency of a stationary cryogenic microwave oscillator, consisting of sapphire crystal operating in a whispering gallery mode, is compared to a hydrogen maser whose frequency was compared to caesium and rubidium atomic fountain clocks. Changes during Earth's rotation have been searched for. Data between 2001–2002 was analyzed. | |
| Müller et al. | 2003 | Two optical resonators constructed from crystalline sapphire, controlling the frequencies of two s, are set at right angles within a helium cryostat. A frequency comparator measures the beat frequency of the combined outputs of the two resonators. | |
| Wolf et al. | 2004 | See Wolf et al.. An active temperature control was implemented. Data between 2002–2003 was analyzed. | |
| Wolf et al. | 2004 | See Wolf et al.. Data between 2002–2004 was analyzed. | |
| Antonini et al. | 2005 | Similar to Müller et al., though the apparatus itself was set into rotation. Data between 2002–2004 was analyzed. | |
| Stanwix et al. | 2005 | Similar to Wolf et al.. The frequency of two cryogenic oscillators was compared. In addition, the apparatus was set into rotation. Data between 2004–2005 was analyzed. | |
| Herrmann et al. | 2005 | Similar to Müller et al.. The frequencies of two optical Fabry–Pérot resonators cavities are compared – one cavity was continuously rotating while the other one was stationary oriented north–south. Data between 2004–2005 was analyzed. | |
| Stanwix et al. | 2006 | See Stanwix et al.. Data between 2004–2006 was analyzed. | |
| Müller et al. | 2007 | See Herrmann et al. and Stanwix et al.. Data of both groups collected between 2004–2006 are combined and further analyzed. Since the experiments are located at difference continents, at Berlin and Perth respectively, the effects of both the rotation of the devices themselves and the rotation of Earth could be studied. | |
| Eisele et al. | 2009 | The frequencies of a pair of orthogonal oriented optical standing wave cavities are compared. The cavities were interrogated by a. Data between 2007–2008 was analyzed. | |
| Herrmann et al. | 2009 | The frequencies of a pair of rotating, orthogonal optical Fabry–Pérot resonators are compared. The frequencies of two s are stabilized to resonances of these resonators. | |
| Nagel et al. | 2015 | The frequencies of a pair of rotating, orthogonal microwave resonators are compared. | - |