By the middle of the 19th century, Rotterdam was already one of the largest port cities in the world, mainly because of transshipment of goods from Germany to Great Britain. The increase in shipping traffic created a capacity problem: there were too many branches in the river delta, making the port difficult to reach. In 1863, a law was passed that allowed for the provision of a new canal for large ocean-going ships from Rotterdam to the North Sea. Hydraulic engineerPieter Caland was commissioned to design a canal cutting through the "Hook of Holland” and to extend the Mouth of Rhine to the sea. The designs for this were already done back in 1731 by Nicolaas Samuelsz Cruquius but the implementation could no longer be postponed to prevent the decline of the harbour of Rotterdam. Construction began on 31 October 1863. The first phase consisted of the expropriation of farm lands from Rozenburg to Hoek van Holland. During the second phase two dikes were built parallel to each other, which took 2 years. Caland proposed to extend the dikes 2 km into the sea to disrupt the coastal sea currents and decrease silt deposits in the shipping lane. Upon the completion of the dikes, the third phase began by the digging of the actual waterway. This began on 31 October 1866 and was completed three years later. The large amounts of removed soil were in turn used to reinforce other dams and dikes. The last phase consisted of the removal of the dam separating the new waterway from the sea and river. In 1872, the Nieuwe Waterweg was completed and Rotterdam was easily accessible. Because of the currents and erosion, the shipping lane has been widened somewhat. Yet because of the draft of today's supertankers, it needs to be dredged constantly. In 1997, the last part of the Delta Works, the Maeslantkering, was put in operation near the mouth of the Nieuwe Waterweg. This storm surge barrier protects Rotterdam against north westerly BeaufortForce 10 to 12 storms.
Current situation
The Nieuwe Waterweg gives the Port of Rotterdam its deep-water access to the North Sea. From Hook of Holland it stretches for approximately where the waterway continues as the Nieuwe Maas. The very first Nieuwe Waterweg—a breach through the dunes at Hook of Holland—was only long, but in around 1877 the channel was made much larger and wider and the current Nieuwe Waterweg was created. Currently the width of the channel is between and it is dredged to a depth of below Amsterdam Ordnance Datum. It is this channel, together with the dredged channels in the North Sea, Maasgeul and Eurogeul, that allows ships like the MS Berge Stahl and MV Vale Rio de Janeiro to enter Europoort. The Dutch government agency Rijkswaterstaat is responsible for maintaining the channel.
Maasmond
The point where the Nieuwe Waterweg enters into the North Sea, between Hook of Holland on the north bank and the Maasvlakte to the south, is called the Maasmond. It is marked with two navigation light-towers called the Paddestoelen. The Nieuwe Waterweg connects, in the North Sea, to the Maasgeul. This dredged channel in the North Sea is being widened to to facilitate the largest container vessels for the new Maasvlakte 2 that opened in 2013.
