OR gate


The OR gate is a digital logic gate that implements logical disjunctionit behaves according to the adjacent truth table. A HIGH output results if one or both the inputs to the gate are HIGH. If neither input is high, a LOW output results. In another sense, the function of OR effectively finds the maximum between two binary digits, just as the complementary AND function finds the minimum.

Symbols

There are two symbols of OR gates: the American symbol and the IEC symbol, as well as the deprecated DIN symbol. For more information see Logic Gate Symbols.

Hardware description and pinout

OR gates are basic logic gates, and are available in TTL and CMOS ICs logic families. The standard 4000 series CMOS IC is the 4071, which includes four independent two-input OR gates. The TTL device is the 7432. There are many offshoots of the original 7432 OR gate, all having the same pinout but different internal architecture, allowing them to operate in different voltage ranges and/or at higher speeds. In addition to the standard 2-input OR gate, 3- and 4-input OR gates are also available. In the CMOS series, these are:
Variations include:

Analytical representation

is the analytical representation of OR gate:
If no specific OR gates are available, one can be made from NAND or NOR gates in the configuration shown in the image below. Any logic gate can be made from a combination of NAND or NOR gates.

Wired-OR

With active low open collector logic outputs, as used for control signals in many circuits, an OR function can be produced by wiring together several outputs. This arrangement is called a wired OR. This implementation of an OR function typically is also found in integrated circuits of N or P-type only transistor processes.