Object copying


In object-oriented programming, object copying is creating a copy of an existing object, a unit of data in object-oriented programming. The resulting object is called an object copy or simply copy of the original object. Copying is basic but has subtleties and can have significant overhead. There are several ways to copy an object, most commonly by a copy constructor or cloning. Copying is done mostly so the copy can be modified or moved, or the current value preserved. If either of these is unneeded, a reference to the original data is sufficient and more efficient, as no copying occurs.
Objects in general store composite data. While in simple cases copying can be done by allocating a new, uninitialized object and copying all fields from the original object, in more complex cases this does not result in desired behavior.

Methods of copying

The design goal of most objects is to give the resemblance of being made out of one monolithic block even though most are not. As objects are made up of several different parts, copying becomes nontrivial. Several strategies exist to treat this problem.
Consider an object A, which contains fields xi. There are different strategies for making a copy of A, referred to as shallow copy and deep copy. Many languages allow generic copying by one or either strategy, defining either one copy operation or separate shallow copy and deep copy operations. Note that even shallower is to use a reference to the existing object A, in which case there is no new object, only a new reference.
The terminology of shallow copy and deep copy dates to Smalltalk-80. The same distinction holds for comparing objects for equality: most basically there is a difference between identity and equality, corresponding to shallow equality and deep equality of two object references, but then further whether equality means comparing only the fields of the object in question or dereferencing some or all fields and comparing their values in turn.

Shallow copy

One method of copying an object is the shallow copy. In that case a new object B is created, and the fields values of A are copied over to B. This is also known as a field-by-field copy, field-for-field copy, or field copy. If the field value is a reference to an object it copies the reference, hence referring to the same object as A does, and if the field value is a primitive type it copies the value of the primitive type. In languages without primitive types, all fields of the copy B are references to the same objects as the fields of original A. The referenced objects are thus shared, so if one of these objects is modified, the change is visible in the other. Shallow copies are simple and typically cheap, as they can be usually implemented by simply copying the bits exactly.

Deep copy

An alternative is a deep copy, meaning that fields are dereferenced: rather than references to objects being copied, new copy objects are created for any referenced objects, and references to these placed in B. The result is different from the result a shallow copy gives in that the objects referenced by the copy B are distinct from those referenced by A, and independent. Deep copies are more expensive, due to needing to create additional objects, and can be substantially more complicated, due to references possibly forming a complicated graph.
Deep copy is a process in which the copying process occurs recursively. It means first constructing a new collection object and then recursively populating it with copies of the child objects found in the original. In case of deep copy, a copy of object is copied in other object. It means that any changes made to a copy of object do not reflect in the original object. In python, this is implemented using “deepcopy” function.

Combination

In more complex cases, some fields in a copy should have shared values with the original object, corresponding to an "association" relationship; and some fields should have copies, corresponding to an "aggregation" relationship. In these cases a custom implementation of copying is generally required; this issue and solution dates to Smalltalk-80. Alternatively, fields can be marked as requiring a shallow copy or deep copy, and copy operations automatically generated. This is not implemented in most object-oriented languages, however, though there is partial support in Eiffel.

Implementation

Nearly all object-oriented programming languages provide some way to copy objects. As most languages do not provide most objects for programs, a programmer must define how an object should be copied, just as they must define if two objects are identical or even comparable in the first place. Many languages provide some default behavior.
How copying is solved varies from language to language, and what concept of an object it has.

Lazy copy

A lazy copy is an implementation of a deep copy. When initially copying an object, a shallow copy is used. A counter is also used to track how many objects share the data. When the program wants to modify an object, it can determine if the data is shared and can do a deep copy if needed.
Lazy copy looks to the outside just as a deep copy, but takes advantage of the speed of a shallow copy whenever possible. The downside are rather high but constant base costs because of the counter. Also, in certain situations, circular references can cause problems.
Lazy copy is related to copy-on-write.

In Java

The following presents examples for one of the most widely used object-oriented languages, Java, which should cover nearly every way that an object-oriented language can treat this problem.
Unlike in C++, objects in Java are always accessed indirectly through references. Objects are never created implicitly but instead are always passed or assigned by a reference variable. The Java Virtual Machine manages garbage collection so that objects are cleaned up after they are no longer reachable. There is no automatic way to copy any given object in Java.
Copying is usually performed by a clone method of a class. This method usually, in turn, calls the clone method of its parent class to obtain a copy, and then does any custom copying procedures. Eventually this gets to the clone method of Object, which creates a new instance of the same class as the object and copies all the fields to the new instance. If this method is used, the class must implement the marker interface, or else it will throw a CloneNotSupportedException. After obtaining a copy from the parent class, a class' own clone method may then provide custom cloning capability, like deep copying or giving the new instance a new unique ID.
The return type of clone is Object, but implementers of a clone method could write the type of the object being cloned instead due to Java's support for covariant return types. One advantage of using clone is that since it is an overridable method, we can call clone on any object, and it will use the clone method of its class, without the calling code needing to know what that class is.
A disadvantage is that one often cannot access the clone method on an abstract type. Most interfaces and abstract classes in Java do not specify a public clone method. Thus, often the only way to use the clone method is if the class of an object is known, which is contrary to the abstraction principle of using the most generic type possible. For example, if one has a List reference in Java, one cannot invoke clone on that reference because List specifies no public clone method. Implementations of List like ArrayList and LinkedList all generally have clone methods, but it is inconvenient and bad abstraction to carry around the class type of an object.
Another way to copy objects in Java is to serialize them through the interface. This is typically used for persistence and wire protocol purposes, but it does create copies of objects and, unlike clone, a deep copy that gracefully handles cycled graphs of objects is readily available with minimal effort from a programmer.
Both of these methods suffer from a notable problem: the constructor is not used for objects copied with clone or serialization. This can lead to bugs with improperly initialized data, prevents the use of final member fields, and makes maintenance challenging. Some utilities attempt to overcome these issues by using reflection to deep copy objects, such as the deep-cloning library.

In Eiffel

Runtime objects in Eiffel are accessible either indirectly through references or as expanded objects which fields are embedded within the objects that use them. That is, fields of an object are stored either externally or internally.
The Eiffel class ANY contains features for shallow and deep copying and cloning of objects. All Eiffel classes inherit from ANY, so these features are available within all classes, and are applicable both to reference and expanded objects.
The copy feature effects a shallow, field-by-field copy from one object to another. In this case no new object is created. If y were copied to x, then the same objects referenced by y before the application of copy, will also be referenced by x after the copy feature completes.
To effect the creation of a new object which is a shallow duplicate of y, the feature twin is used. In this case, one new object is created with its fields identical to those of the source.
The feature twin relies on the feature copy, which can be redefined in descendants of ANY, if needed. The result of twin is of the anchored type like Current.
Deep copying and creating deep twins can be done using the features deep_copy and deep_twin, again inherited from class ANY. These features have the potential to create many new objects, because they duplicate all the objects in an entire object structure. Because new duplicate objects are created instead of simply copying references to existing objects, deep operations will become a source of performance issues more readily than shallow operations.

In other languages

In C#, rather than using the interface ICloneable, a generic extension method can be used to create a deep copy using reflection. This has two advantages: First, it provides the flexibility to copy every object without having to specify each property and variable to be copied manually. Second, because the type is generic, the compiler ensures that the destination object and the source object have the same type.
In Objective-C, the methods copy and mutableCopy are inherited by all objects and intended for performing copies; the latter is for creating a mutable type of the original object. These methods in turn call the copyWithZone and mutableCopyWithZone methods, respectively, to perform the copying. An object must implement the corresponding copyWithZone method to be copyable.
In OCaml, the library function performs shallow copying of an object.
In Python, the library's copy module provides shallow copy and deep copy of objects through the copy and deepcopy functions, respectively. Programmers may define special methods __copy__ and __deepcopy__ in an object to provide custom copying implementation.
In Ruby, all objects inherit two methods for performing shallow copies, and . The two methods differ in that clone copies an object's tainted state, frozen state, and any singleton methods it may have, whereas dup copies only its tainted state. Deep copies may be achieved by dumping and loading an object's byte stream or YAML serialization. Alternatively, you can use the deep_dive gem to do a controlled deep copy of your object graphs.
In Perl, nested structures are stored by the use of references, thus a developer can either loop over the entire structure and re-reference the data or use the dclone function from the module .
In VBA, an assignment of variables of type Object is a shallow copy, an assignment for all other types is a deep copy. So the keyword Set for an assignment signals a shallow copy and the keyword Let signals a deep copy. There is no built-in method for deep copies of Objects in VBA.