Progress D-236


The Progress D-236 was an experimental aircraft engine, a hybrid between a turbofan and a turboprop known as a propfan. Also known as the Lotarev D-236T, the three-shaft geared engine was designed in the 1980s and 1990s to power proposed propfan aircraft such as the Tupolev Tu-334, Ilyushin Il-118, and Ilyushin Il-88.
Based on the core of the Ukrainian Progress D-36 turbofan, the D-236 was the first Soviet propfan, and as of 2019 it is still one of only four different unshrouded, contra-rotating propfan engines to have flown in service or in flight testing.

Design and development

The D-236, an engine with unshrouded contra-rotating propellers, was first investigated in 1979 as the powerplant for the first version of the Ukrainian Antonov An-70. The front propeller was tested on the Antonov An-32 military transport aircraft in 1980, as the An-32's normal Ivchenko AI-20DM engines had about half the rated power of the D-236. However, the anticipated improvements in takeoff performance and noise reduction did not materialize. The noise at cruise speeds reached 115 to 120 decibels, which was even higher than the noise levels produced by the lighter Aerosila AV-68DM propellers typically attached on the AI-20DM. The increased noise affected radio communications and crew working conditions, so the propeller testing was quickly ended.
An early version of the contra-rotating propellers for the D-236 engine was shown at the Paris Air Show in June. At that time, the propellers had 16 blades with a diameter of. The blades had a glass fiber and carbon fiber composite shell over a metal spar, and they had about 45 degrees of twist. The propellers would rotate at 1,100 rpm at takeoff and 960 rpm at cruise. Soviet engineers claimed that the engine would be delivered by 1989 and help Antonov airliners meet the strictest U.S. community noise standards, although they were still working on a solution to lower cabin noise. The gently curved blades were efficient up to a speed of Mach 0.7, which led some American engineers to claim that the contra-rotating propeller was not fast enough to be a propfan, and that it was simply an advanced propeller. The propfan/advanced propeller would power an unspecified Antonov airliner and be connected to the D-236 engine, which would be rated at. The engine was scheduled to start flight tests by the end of the year.

Flight tests

However, the engine didn't fly until it was mounted on an Ilyushin Il-76 testbed in. By June, it had accumulated 50 hours of flight tests on the Il-76, now traveling at speeds up to Mach 0.75 with good efficiency. A model of the propfan testbed aircraft was displayed at the Paris Air Show that month. The Ilyushin Il-76 with the D-236 engine was also flown to the Hannover ILA 90 airshow, with the engine now having eight blades on the front propeller and six blades on the back propeller. The Soviets claimed the D-236 had a true aerodynamic efficiency of 28 percent and a fuel savings of 30 percent over an equivalent turboprop. In addition, the Soviets revealed that the D-236 was intended for an unidentified four-propfan aircraft. In total, the D-236 flew 36 times for a total of 70 flight test hours on the Il-76.
The D-236 engine also was tested in flight on a Yakovlev Yak-42E-LL starting on March 15,. The engine now had a diameter of, a takeoff thrust of, and an output power of, although it was limited to on this testbed. The Yak-42E-LL testbed aircraft was flown to the 1991 Paris Air Show as a demonstration for the planned Yak-46 aircraft with twin propfan engines. The Yak-46 would have a base capacity of 150 seats, a range of, and a cruise speed of Mach 0.75. The D-236 finished testing on the Yak-42E-LL testbed before the end of 1991.

Other proposals

In addition, the Soviet Union considered using D-236 propfan engines on these publicly proposed aircraft:
Although in November 1991, the Hamilton Standard propeller manufacturing division of United Technologies was to meet with a Soviet aerospace delegation to discuss involvement in the D-236 project, the engine never made it into service. Only the Tu-334 was built, but it was produced with D-436 turbofan engines instead of propfans. The breakup of the Soviet Union plunged the successor states into financial troubles, which prevented further development of the D-236 and aircraft that would use that powerplant. One post-Soviet aircraft would eventually enter service with propfans, but the Antonov An-70 aircraft would instead use the Progress D-27, which was a larger, more powerful, and more advanced propfan engine.

Applications